This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>master
parent
d9753f0ec5
commit
1e4ee63cc8
@ -0,0 +1,50 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "qca9563_tplink_archer-x7-v5.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "tplink,archer-a7-v5", "qca,qca9563"; |
||||||
|
model = "TP-Link Archer A7 v5"; |
||||||
|
}; |
||||||
|
|
||||||
|
&mtdparts { |
||||||
|
factory-uboot@0 { |
||||||
|
label = "factory-uboot"; |
||||||
|
reg = <0x000000 0x020000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
uboot: u-boot@20000 { |
||||||
|
label = "u-boot"; |
||||||
|
reg = <0x020000 0x020000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
firmware@40000 { |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x040000 0xec0000>; |
||||||
|
compatible = "denx,uimage"; |
||||||
|
}; |
||||||
|
|
||||||
|
info: info@f40000 { |
||||||
|
label = "info"; |
||||||
|
reg = <0xf40000 0x020000>; |
||||||
|
}; |
||||||
|
|
||||||
|
config: config@f60000 { |
||||||
|
label = "config"; |
||||||
|
reg = <0xf60000 0x050000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@fc0000 { |
||||||
|
label = "partition-table"; |
||||||
|
reg = <0xfc0000 0x010000>; |
||||||
|
}; |
||||||
|
|
||||||
|
art: art@ff0000 { |
||||||
|
label = "art"; |
||||||
|
reg = <0xff0000 0x010000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,202 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
#include "qca956x.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
chosen { |
||||||
|
bootargs = "console=ttyS0,115200n8"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-status = &system; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio_leds: leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
system: system { |
||||||
|
label = "tp-link:green:system"; |
||||||
|
gpios = <&gpio 6 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "on"; |
||||||
|
}; |
||||||
|
|
||||||
|
led_wlan2g: wlan2g { |
||||||
|
label = "tp-link:green:wlan2g"; |
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
linux,default-trigger = "phy1tpt"; |
||||||
|
}; |
||||||
|
|
||||||
|
usb { |
||||||
|
label = "tp-link:green:usb"; |
||||||
|
gpios = <&gpio 7 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
trigger-sources = <&hub_port0>; |
||||||
|
linux,default-trigger = "usbport"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio_keys: keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "Reset button"; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
|
||||||
|
wps { |
||||||
|
label = "WPS button"; |
||||||
|
linux,code = <KEY_WPS_BUTTON>; |
||||||
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-export { |
||||||
|
compatible = "gpio-export"; |
||||||
|
|
||||||
|
gpio_usb_power { |
||||||
|
gpio-export,name = "tp-link:power:usb"; |
||||||
|
gpio-export,output = <1>; |
||||||
|
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb_phy0 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb0 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
hub_port0: port@1 { |
||||||
|
reg = <1>; |
||||||
|
#trigger-source-cells = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio_leds { |
||||||
|
wlan5g { |
||||||
|
label = "tp-link:green:wlan5g"; |
||||||
|
gpios = <&gpio 9 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
linux,default-trigger = "phy0tpt"; |
||||||
|
}; |
||||||
|
|
||||||
|
wan { |
||||||
|
label = "tp-link:green:wan"; |
||||||
|
gpios = <&gpio 21 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
wan_fail { |
||||||
|
label = "tp-link:orange:wan"; |
||||||
|
gpios = <&gpio 20 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
lan1 { |
||||||
|
label = "tp-link:green:lan1"; |
||||||
|
gpios = <&gpio 8 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
lan2 { |
||||||
|
label = "tp-link:green:lan2"; |
||||||
|
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
lan3 { |
||||||
|
label = "tp-link:green:lan3"; |
||||||
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
lan4 { |
||||||
|
label = "tp-link:green:lan4"; |
||||||
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
wps { |
||||||
|
label = "tp-link:green:wps"; |
||||||
|
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi { |
||||||
|
status = "okay"; |
||||||
|
num-cs = <1>; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <25000000>; |
||||||
|
|
||||||
|
mtdparts: partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&mdio0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
phy-mask = <0>; |
||||||
|
|
||||||
|
phy0: ethernet-phy@0 { |
||||||
|
reg = <0>; |
||||||
|
phy-mode = "sgmii"; |
||||||
|
|
||||||
|
qca,ar8327-initvals = < |
||||||
|
0x04 0x00080080 /* PORT0 PAD MODE CTRL */ |
||||||
|
0x10 0x81000080 /* POWER_ON_STRIP */ |
||||||
|
0x50 0xcc35cc35 /* LED_CTRL0 */ |
||||||
|
0x54 0xcb37cb37 /* LED_CTRL1 */ |
||||||
|
0x58 0x00000000 /* LED_CTRL2 */ |
||||||
|
0x5c 0x00f3cf00 /* LED_CTRL3 */ |
||||||
|
0x7c 0x0000007e /* PORT0_STATUS */ |
||||||
|
>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ð0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
pll-data = <0x03000101 0x00000101 0x00001919>; |
||||||
|
|
||||||
|
phy-mode = "sgmii"; |
||||||
|
mtd-mac-address = <&info 0x8>; |
||||||
|
phy-handle = <&phy0>; |
||||||
|
}; |
||||||
|
|
||||||
|
&wmac { |
||||||
|
status = "okay"; |
||||||
|
mtd-cal-data = <&art 0x1000>; |
||||||
|
mtd-mac-address = <&info 0x8>; |
||||||
|
}; |
Loading…
Reference in new issue