There are many parts that are incorrect or missing in the current code for Buffalo WZR-HP-G450H in ath79, so its support is broken. I fixed that issues and split to dts/dtsi files to add support for Buffalo BHR-4GRV. And WZR-450HP has the same hardware as WZR-HP-G450H, so I change the device name to "WZR-HP-G450H/WZR-450HP". Specification: - Atheros AR7242 - 64 MB of RAM - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 3T3R 2.4 GHz wifi - SoC internal - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 5x keys - 1x USB 2.0 Type-A - UART header on PCB - JP1: Vcc, GND, TX, RX from reset button side Flash instruction using factory image: 1. Boot the WZR-HP-G450H (or WZR-450HP) normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html" with user "bufpy" and password "otdpopy" 3. Select the OpenWrt factory image and click "OK" button to perform firmware update 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>master
parent
b6e6785c88
commit
1df1ea4d7e
@ -0,0 +1,174 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
#include "ar7242.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
aliases { |
||||||
|
led-boot = &diag; |
||||||
|
led-failsafe = &diag; |
||||||
|
led-upgrade = &diag; |
||||||
|
}; |
||||||
|
|
||||||
|
extosc: ref { |
||||||
|
compatible = "fixed-clock"; |
||||||
|
#clock-cells = <0>; |
||||||
|
clock-frequency = <40000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
keys: keys { |
||||||
|
compatible = "gpio-keys-polled"; |
||||||
|
poll-interval = <20>; |
||||||
|
|
||||||
|
usb { |
||||||
|
label = "usb"; |
||||||
|
linux,code = <BTN_2>; |
||||||
|
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
gpios = <&gpio 6 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
sec_vpn: sec_vpn { |
||||||
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
diag: diag { |
||||||
|
label = "buffalo:red:diag"; |
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
usb { |
||||||
|
label = "buffalo:green:usb"; |
||||||
|
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "off"; |
||||||
|
trigger-sources = <&hub_port>; |
||||||
|
linux,default-trigger = "usbport"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-export { |
||||||
|
compatible = "gpio-export"; |
||||||
|
#size-cells = <0>; |
||||||
|
|
||||||
|
gpio_usb_power { |
||||||
|
gpio-export,name = "buffalo:usb-power"; |
||||||
|
gpio-export,output = <1>; |
||||||
|
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
virtual_flash { |
||||||
|
compatible = "mtd-concat"; |
||||||
|
devices = <&flash0 &flash1>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
reg = <0x0 0x40000>; |
||||||
|
label = "u-boot"; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@40000 { |
||||||
|
reg = <0x40000 0x10000>; |
||||||
|
label = "u-boot-env"; |
||||||
|
}; |
||||||
|
|
||||||
|
ART: partition@50000 { |
||||||
|
reg = <0x50000 0x10000>; |
||||||
|
label = "ART"; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@60000 { |
||||||
|
reg = <0x60000 0x1f80000>; |
||||||
|
label = "firmware"; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@1fe0000 { |
||||||
|
reg = <0x1fe0000 0x20000>; |
||||||
|
label = "user_property"; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi { |
||||||
|
status = "okay"; |
||||||
|
cs-gpios = <0>, <0>; |
||||||
|
num-cs = <2>; |
||||||
|
|
||||||
|
flash0: flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <25000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
flash1: flash@1 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <1>; |
||||||
|
spi-max-frequency = <25000000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&mdio0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
phy-mask = <0x1>; |
||||||
|
|
||||||
|
phy0: ethernet-phy@0 { |
||||||
|
reg = <0>; |
||||||
|
phy-mode = "rgmii"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ð0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
mtd-mac-address = <&ART 0x1002>; |
||||||
|
|
||||||
|
phy-mode = "rgmii"; |
||||||
|
phy-handle = <&phy0>; |
||||||
|
}; |
||||||
|
|
||||||
|
&pll { |
||||||
|
clocks = <&extosc>; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb_phy { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
hub_port: port@1 { |
||||||
|
reg = <1>; |
||||||
|
#trigger-source-cells = <0>; |
||||||
|
}; |
||||||
|
}; |
Loading…
Reference in new issue