TP-Link Archer C7 v4 is a dual-band AC1750 router, based on the Qualcomm/Atheros QCA9561 SoC + QCA9880. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>master
parent
bb23cb1bf2
commit
12310f05b7
@ -0,0 +1,271 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca956x.dtsi" |
||||
|
||||
/ { |
||||
compatible = "tplink,archer-c7-v4", "qca,qca9563"; |
||||
model = "TP-Link Archer C7 v4"; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,115200n8"; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &system; |
||||
led-failsafe = &system; |
||||
led-running = &system; |
||||
led-upgrade = &system; |
||||
}; |
||||
|
||||
led_spi { |
||||
compatible = "spi-gpio"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>; // 74HC595 SRCLK (Serial Clock) |
||||
gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>; // 74HC595 SER (Serial) |
||||
cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; // 74HC595 RCLK (Register Clock) |
||||
num-chipselects = <1>; |
||||
|
||||
led_gpio: led_gpio@0 { |
||||
compatible = "fairchild,74hc595"; |
||||
reg = <0>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
registers-number = <1>; |
||||
spi-max-frequency = <10000000>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-export { |
||||
compatible = "gpio-export"; |
||||
|
||||
gpio_shift_register_oe { |
||||
gpio-export,name = "tp-link:oe:sr"; |
||||
gpio-export,output = <0>; |
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; // 74HC595 /OE (Output Enable) |
||||
}; |
||||
|
||||
gpio_shift_register_reset { |
||||
gpio-export,name = "tp-link:reset:sr"; |
||||
gpio-export,output = <1>; |
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>; // 74HC595 /SRCLR (Serial Clear) |
||||
}; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
system: system { |
||||
label = "tp-link:green:system"; |
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
usb1 { |
||||
label = "tp-link:green:usb1"; |
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>; |
||||
trigger-sources = <&hub_port0>; |
||||
linux,default-trigger = "usbport"; |
||||
}; |
||||
|
||||
usb2 { |
||||
label = "tp-link:green:usb2"; |
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>; |
||||
trigger-sources = <&hub_port1>; |
||||
linux,default-trigger = "usbport"; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "tp-link:green:wlan5g"; |
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy0tpt"; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "tp-link:green:wlan2g"; |
||||
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy1tpt"; |
||||
}; |
||||
|
||||
wan { |
||||
label = "tp-link:green:wan"; |
||||
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wan_fail { |
||||
label = "tp-link:orange:wan"; |
||||
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan1 { |
||||
label = "tp-link:green:lan1"; |
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan2 { |
||||
label = "tp-link:green:lan2"; |
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan3 { |
||||
label = "tp-link:green:lan3"; |
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan4 { |
||||
label = "tp-link:green:lan4"; |
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "tp-link:green:wps"; |
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
reset { |
||||
label = "Reset button"; |
||||
linux,code = <KEY_RESTART>; |
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "WPS button"; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&gpio { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_phy0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
status = "okay"; |
||||
|
||||
hub_port0: port@1 { |
||||
reg = <1>; |
||||
#trigger-source-cells = <0>; |
||||
}; |
||||
}; |
||||
|
||||
&usb_phy1 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb1 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
status = "okay"; |
||||
|
||||
hub_port1: port@1 { |
||||
reg = <1>; |
||||
#trigger-source-cells = <0>; |
||||
}; |
||||
}; |
||||
|
||||
&spi { |
||||
status = "okay"; |
||||
num-cs = <1>; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <25000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "factory-uboot"; |
||||
reg = <0x000000 0x020000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "u-boot"; |
||||
reg = <0x020000 0x020000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@40000 { |
||||
label = "firmware"; |
||||
reg = <0x040000 0xec0000>; |
||||
compatible = "denx,uimage"; |
||||
}; |
||||
|
||||
info: partition@f00000 { |
||||
label = "config"; |
||||
reg = <0xf00000 0x0f0000>; |
||||
read-only; |
||||
}; |
||||
|
||||
art: partition@ff0000 { |
||||
label = "art"; |
||||
reg = <0xff0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&mdio0 { |
||||
status = "okay"; |
||||
|
||||
phy-mask = <0>; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
reg = <0>; |
||||
phy-mode = "sgmii"; |
||||
|
||||
qca,ar8327-initvals = < |
||||
0x04 0x80080080 /* PORT0 PAD MODE CTRL */ |
||||
0x7c 0x0000007e /* PORT0_STATUS */ |
||||
0x94 0x00000200 /* PORT6_STATUS */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
|
||||
pll-data = <0x03000101 0x00000101 0x00001919>; |
||||
|
||||
phy-mode = "sgmii"; |
||||
mtd-mac-address = <&info 0x8>; |
||||
phy-handle = <&phy0>; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
mtd-cal-data = <&art 0x1000>; |
||||
mtd-mac-address = <&info 0x8>; |
||||
}; |
Loading…
Reference in new issue