packages: bump uboot-sunxi to enable H3 support

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
master
Zoltan Herpai 9 years ago
parent 2a0e1b7f8d
commit 0f18228a3a
  1. 14
      package/boot/uboot-sunxi/Makefile
  2. 285
      package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
  3. 3
      package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff
  4. 42
      package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch

@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=u-boot PKG_NAME:=u-boot
PKG_VERSION:=2015.07 PKG_VERSION:=2016.01-rc2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \ PKG_SOURCE_URL:= \
http://mirror2.openwrt.org/sources \ http://mirror2.openwrt.org/sources \
ftp://ftp.denx.de/pub/u-boot ftp://ftp.denx.de/pub/u-boot
PKG_MD5SUM:=3dac9a0b46fed77fc768ad3bd2d68c05 PKG_MD5SUM:=aca6c7a38534812ab529e90aae976422
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@ -66,6 +66,10 @@ define uboot/Cubietruck
TITLE:=U-Boot for Cubietruck TITLE:=U-Boot for Cubietruck
endef endef
define uboot/Hummingbird_A31
TITLE:=U-Boot for the Hummingbird A31 board
endef
define uboot/Mele_M9 define uboot/Mele_M9
TITLE:=U-Boot for the Mele M9 (A31) TITLE:=U-Boot for the Mele M9 (A31)
endef endef
@ -86,6 +90,10 @@ define uboot/Lamobo_R1
TITLE:=U-Boot for Lamobo R1 TITLE:=U-Boot for Lamobo R1
endef endef
define uboot/orangepi_plus
TITLE:=U-Boot for Orange Pi Plus (H3)
endef
UBOOTS:= \ UBOOTS:= \
A10-OLinuXino-Lime \ A10-OLinuXino-Lime \
A13-OLinuXino \ A13-OLinuXino \
@ -96,11 +104,13 @@ UBOOTS:= \
Cubieboard \ Cubieboard \
Cubieboard2 \ Cubieboard2 \
Cubietruck \ Cubietruck \
Hummingbird_A31 \
Mele_M9 \ Mele_M9 \
OLIMEX_A13_SOM \ OLIMEX_A13_SOM \
Linksprite_pcDuino \ Linksprite_pcDuino \
Linksprite_pcDuino3 \ Linksprite_pcDuino3 \
Lamobo_R1 \ Lamobo_R1 \
orangepi_plus
define Package/uboot/template define Package/uboot/template
define Package/uboot-sunxi-$(1) define Package/uboot-sunxi-$(1)

@ -1,285 +0,0 @@
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9c735c6..a32d772 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-ainol-aw1.dtb \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapro.dtb \
+ sun7i-a20-lamobo-r1.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 0000000..a77fb5c
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Lamobo Banana Pi R1";
+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart3;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapi>;
+
+ green {
+ label = "bananapi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_bananapi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir0_tx_pins_a: ir0@1 {
+ allwinner,pins = "PB3";
+ allwinner,function = "ir0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+};
+
+&reg_usb1_vbus {
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>,
+ <&spi0_cs1_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 7a42055..abf2c1c 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -30,6 +30,7 @@ F: include/configs/sun7i.h
F: configs/A20-OLinuXino_MICRO_defconfig
F: configs/Bananapi_defconfig
F: configs/Bananapro_defconfig
+F: configs/Lamobo_R1_defconfig
F: configs/i12-tvbox_defconfig
F: configs/Linksprite_pcDuino3_defconfig
F: configs/Linksprite_pcDuino3_fdt_defconfig
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
new file mode 100644
index 0000000..bf665e7
--- /dev/null
+++ b/configs/Lamobo_R1_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=432
+CONFIG_GMAC_TX_DELAY=4
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_ETH_DESIGNWARE=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_NETDEVICES=y
+CONFIG_NET=y

@ -1,7 +1,7 @@
diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig
--- u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig 1970-01-01 01:00:00.000000000 +0100 --- u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig 2015-01-18 16:25:11.908986082 +0100 +++ u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig 2015-01-18 16:25:11.908986082 +0100
@@ -0,0 +1,15 @@ @@ -0,0 +1,16 @@
+CONFIG_SPL=y +CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,NO_AXP,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,NO_AXP,USB_EHCI"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
@ -17,3 +17,4 @@ diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/con
+CONFIG_DM_SERIAL=y +CONFIG_DM_SERIAL=y
+CONFIG_USB=y +CONFIG_USB=y
+CONFIG_DM_USB=y +CONFIG_DM_USB=y
+CONFIG_SYS_NS16550=y

@ -1,42 +0,0 @@
diff --git a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
new file mode 100644
index 0000000..180b60b
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
@@ -0,0 +1,36 @@
+From 8a5481e2e51a86e858c4f1481729421f26cc240c Mon Sep 17 00:00:00 2001
+From: Yousong Zhou <yszhou4tech@gmail.com>
+Date: Sat, 29 Aug 2015 21:26:11 +0800
+Subject: [PATCH] sunxi: mmc: set transfer timeout according to byte_cnt.
+
+Originally a timeout value of 2 seconds was used regardless of the size
+of data to be transfered. This prevented slow devices from working
+correctly while there was no much gain for faster devices, e.g. it takes
+3708ms for a transfer of uImage of size 1899008 bytes.
+
+Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
+---
+ drivers/mmc/sunxi_mmc.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
+index e7ab828..7a990f7 100644
+--- a/drivers/mmc/sunxi_mmc.c
++++ b/drivers/mmc/sunxi_mmc.c
+@@ -257,9 +257,11 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
+ const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
+ SUNXI_MMC_STATUS_FIFO_FULL;
+ unsigned i;
+- unsigned byte_cnt = data->blocksize * data->blocks;
+- unsigned timeout_msecs = 2000;
+ unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
++ unsigned byte_cnt = data->blocksize * data->blocks;
++ unsigned timeout_msecs = byte_cnt >> 8;
++ if (timeout_msecs < 2000)
++ timeout_msecs = 2000;
+
+ /* Always read / write data through the CPU */
+ setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
+--
+1.7.10.4
+
Loading…
Cancel
Save