Specifications: - SoC: MT7628DAN (MT7628AN with 64MB built-in RAM) - Flash: 8M SPI NOR - Ethernet: 5x 10/100Mbps - WiFi: 2.4G: MT7628 built-in 5G: MT7612E - 1x miniPCIe slot for LTE modem (only USB pins connected) - 1x SIM slot Flash instruction: U-boot has a builtin web recovery page: 1. Hold the reset button while powering it up 2. Connect to the ethernet and set an IP in 192.168.1.0/24 range 3. Open your browser and upload firmware through http://192.168.1.1 Note about the LTE modem: If your router comes with an EC25 module and it doesn't show up as a QMI device, you should do the following to switch it to QMI mode: 1. Install kmod-usb-serial-option and a terminal software (e.g. minicom or screen). All 4 serial ports of the modem should be available now. 2. Open /dev/ttyUSB3 with the terminal software and type this AT command: AT+QCFG="usbnet",0 3. Power-cycle the router. You should now get a QMI device recognized. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>master
parent
64493d42b4
commit
0ab9f283f7
@ -0,0 +1,156 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "mt7628an.dtsi" |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "totolink,lr1200", "mediatek,mt7628dan"; |
||||||
|
model = "TOTOLINK LR1200"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-boot = &led_sys; |
||||||
|
led-failsafe = &led_sys; |
||||||
|
led-running = &led_sys; |
||||||
|
led-upgrade = &led_sys; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
led_sys: sys { |
||||||
|
label = "lr1200:blue:sys"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
sms { |
||||||
|
label = "lr1200:blue:sms"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
wifi { |
||||||
|
label = "lr1200:blue:wifi"; |
||||||
|
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
||||||
|
linux,default-trigger = "phy0tpt"; |
||||||
|
}; |
||||||
|
3g { |
||||||
|
label = "lr1200:blue:3g"; |
||||||
|
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
4g { |
||||||
|
label = "lr1200:blue:4g"; |
||||||
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
rssi1 { |
||||||
|
label = "lr1200:blue:rssi1"; |
||||||
|
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
rssi2 { |
||||||
|
label = "lr1200:blue:rssi2"; |
||||||
|
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
rssi3 { |
||||||
|
label = "lr1200:blue:rssi3"; |
||||||
|
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
rssi4 { |
||||||
|
label = "lr1200:blue:rssi4"; |
||||||
|
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
keys { |
||||||
|
compatible = "gpio-keys-polled"; |
||||||
|
poll-interval = <20>; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio1 { |
||||||
|
gpio_modem_reset { |
||||||
|
gpio-hog; |
||||||
|
gpios = <13 GPIO_ACTIVE_HIGH>; |
||||||
|
output-high; |
||||||
|
line-name = "modem-reset"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
state_default: pinctrl0 { |
||||||
|
gpio { |
||||||
|
ralink,group = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an"; |
||||||
|
ralink,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie0 { |
||||||
|
mt76@0,0 { |
||||||
|
reg = <0x0000 0 0 0 0>; |
||||||
|
mediatek,mtd-eeprom = <&factory 0x8000>; |
||||||
|
ieee80211-freq-limit = <5000000 6000000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&wmac { |
||||||
|
status = "okay"; |
||||||
|
ralink,mtd-eeprom = <&factory 0x4>; |
||||||
|
}; |
||||||
|
|
||||||
|
ðernet { |
||||||
|
mtd-mac-address = <&factory 0x28>; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
m25p80@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <40000000>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "u-boot"; |
||||||
|
reg = <0x0 0x30000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@30000 { |
||||||
|
label = "u-boot-env"; |
||||||
|
reg = <0x30000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
factory: partition@40000 { |
||||||
|
label = "factory"; |
||||||
|
reg = <0x40000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@50000 { |
||||||
|
compatible = "denx,uimage"; |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x50000 0x7b0000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
Loading…
Reference in new issue