@ -318,7 +318,7 @@
#endif /* BCM63XX_REGS_H_ */
--- /dev/null
+++ b/drivers/spi/bcm63xx_spi.c
@@ -0,0 +1,479 @@
@@ -0,0 +1,501 @@
+/*
+ * Broadcom BCM63xx SPI controller support
+ *
@ -376,6 +376,30 @@
+ struct platform_device *pdev;
+};
+
+static inline u8 bcm_spi_readb(struct bcm63xx_hsspi *bs,
+ unsigned int offset)
+{
+ return bcm_readw(bs->regs + bcm63xx_spireg(offset));
+}
+
+static inline u16 bcm_spi_readw(struct bcm63xx_hsspi *bs,
+ unsigned int offset)
+{
+ return bcm_readw(bs->regs + bcm63xx_spireg(offset));
+}
+
+static inline void bcm_spi_writeb(struct bcm63xx_hsspi *bs,
+ u8 value, unsigned int offset)
+{
+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
+}
+
+static inline void bcm_spi_writew(struct bcm63xx_hsspi *bs,
+ u16 value, unsigned int offset)
+{
+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
+}
+
+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
@ -428,7 +452,7 @@
+ break;
+ }
+
+ bcm_spi_writeb(clk_cfg, SPI_CLK_CFG);
+ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG);
+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
+ div, hz, clk_cfg);
+
@ -441,7 +465,7 @@
+static int bcm63xx_spi_setup(struct spi_device *spi)
+{
+ struct bcm63xx_spi *bs;
+ int retval ;
+ int ret;
+
+ bs = spi_master_get_devdata(spi->master);
+
@ -457,11 +481,11 @@
+ return -EINVAL;
+ }
+
+ retval = bcm63xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
+ ret = bcm63xx_spi_setup_transfer(spi, NULL);
+ if (ret < 0) {
+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return retval ;
+ return ret;
+ }
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
@ -476,16 +500,16 @@
+ u8 tail;
+
+ /* Fill the Tx FIFO with as many bytes as possible */
+ tail = bcm_spi_readb(SPI_MSG_TAIL);
+ tail = bcm_spi_readb(bs, SPI_MSG_TAIL);
+
+ while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) {
+ if (bs->tx_ptr)
+ bcm_spi_writeb( *bs->tx_ptr++, SPI_MSG_DATA);
+ bcm_spi_writeb(bs, *bs->tx_ptr++, SPI_MSG_DATA);
+ else
+ bcm_spi_writeb(0, SPI_MSG_DATA);
+ bcm_spi_writeb(bs, 0, SPI_MSG_DATA);
+
+ bs->remaining_bytes--;
+ tail = bcm_spi_readb(SPI_MSG_TAIL);
+ tail = bcm_spi_readb(bs, SPI_MSG_TAIL);
+ }
+}
+
@ -510,7 +534,7 @@
+
+ /* Enable the command done interrupt which
+ * we use to determine completion of a command */
+ bcm_spi_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+
+ /* Fill in the Message control register */
+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@ -522,37 +546,37 @@
+ else if (t->tx_buf)
+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
+
+ bcm_spi_writew(msg_ctl, SPI_MSG_CTL);
+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+
+ /* Issue the transfer */
+ cmd = SPI_CMD_START_IMMEDIATE;
+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ bcm_spi_writew(cmd, SPI_CMD);
+ bcm_spi_writew(bs, cmd, SPI_CMD);
+ wait_for_completion(&bs->done);
+
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(0, SPI_INT_MASK);
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
+ return t->len - bs->remaining_bytes;
+}
+
+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *msg )
+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ struct spi_transfer *xfer ;
+ struct spi_transfer *t ;
+ int ret = 0;
+
+ if (unlikely(list_empty(&msg ->transfers)))
+ if (unlikely(list_empty(&m->transfers)))
+ return -EINVAL;
+
+ if (bs->stopping)
+ return -ESHUTDOWN;
+
+ list_for_each_entry(xfer, &msg ->transfers, transfer_list) {
+ ret += bcm63xx_txrx_bufs(spi, xfer );
+ list_for_each_entry(t, &m ->transfers, transfer_list) {
+ ret += bcm63xx_txrx_bufs(spi, t );
+ }
+
+ msg ->complete(msg ->context);
+ m->complete(m->context);
+
+ return ret;
+}
@ -568,15 +592,15 @@
+ u16 cmd;
+
+ /* Read interupts and clear them immediately */
+ intr = bcm_spi_readb(SPI_INT_STATUS);
+ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+ bcm_spi_writeb(0, SPI_INT_MASK);
+ intr = bcm_spi_readb(bs, SPI_INT_STATUS);
+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
+ /* A tansfer completed */
+ if (intr & SPI_INTR_CMD_DONE) {
+ u8 rx_tail;
+
+ rx_tail = bcm_spi_readb(SPI_RX_TAIL);
+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+ /* Read out all the data */
+ if (rx_tail) {
@ -584,7 +608,7 @@
+ u8 i = 0;
+
+ for(i = 0; i < rx_tail; i++) {
+ data = bcm_spi_readb(SPI_RX_DATA);
+ data = bcm_spi_readb(bs, SPI_RX_DATA);
+ if (bs->rx_ptr)
+ *bs->rx_ptr++ = data;
+ }
@ -595,13 +619,13 @@
+ bcm63xx_spi_fill_tx_fifo(bs);
+
+ /* Start the transfer */
+ bcm_spi_writew(SPI_HD_W << SPI_MSG_TYPE_SHIFT,
+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
+ SPI_MSG_CTL);
+ cmd = bcm_spi_readw(SPI_CMD);
+ cmd = bcm_spi_readw(bs, SPI_CMD);
+ cmd |= SPI_CMD_START_IMMEDIATE;
+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ bcm_spi_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ bcm_spi_writew(cmd, SPI_CMD);
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ bcm_spi_writew(bs, cmd, SPI_CMD);
+ } else {
+ complete(&bs->done);
+ }
@ -636,14 +660,14 @@
+ goto out;
+ }
+
+ clk = clk_get(&pdev-> dev, "spi");
+ clk = clk_get(dev, "spi");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "no clock for device\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi ));
+ master = spi_alloc_master(dev, sizeof(*bs ));
+ if (!master) {
+ dev_err(dev, "out of memory\n");
+ ret = -ENOMEM;
@ -656,8 +680,7 @@
+ platform_set_drvdata(pdev, master);
+ bs->pdev = pdev;
+
+ if (!request_mem_region(r->start,
+ r->end - r->start, PFX)) {
+ if (!request_mem_region(r->start, r->end - r->start, PFX)) {
+ dev_err(dev, "iomem request failed\n");
+ ret = -ENXIO;
+ goto out_put_master;
@ -673,8 +696,7 @@
+ bs->clk = clk;
+ bs->fifo_size = pdata->fifo_size;
+
+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0,
+ pdev->name, master);
+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master);
+ if (ret) {
+ dev_err(dev, "unable to request irq\n");
+ goto out_unmap;
@ -690,7 +712,7 @@
+
+ /* Initialize hardware */
+ clk_enable(bs->clk);
+ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+
+ /* register and we are done */
+ ret = spi_register_master(master);
@ -702,7 +724,7 @@
+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
+ r->start, irq, bs->fifo_size, DRV_VER);
+
+ return ret ;
+ return 0 ;
+
+out_reset_hw:
+ clk_disable(clk);
@ -724,7 +746,7 @@
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* reset spi block */
+ bcm_spi_writeb(0, SPI_INT_MASK);
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+ spin_lock(&bs->lock);
+ bs->stopping = 1;
+
@ -825,7 +847,7 @@
spi_s3c24xx_hw-y := spi_s3c24xx.o
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -0,0 +1,13 6 @@
@@ -0,0 +1,12 6 @@
+#ifndef BCM63XX_DEV_SPI_H
+#define BCM63XX_DEV_SPI_H
+
@ -951,16 +973,6 @@
+ return 0;
+}
+
+/*
+ * helpers for the SPI register sets
+ */
+#define bcm_spi_readb(o) bcm_rset_readb(RSET_SPI, bcm63xx_spireg(o))
+#define bcm_spi_readw(o) bcm_rset_readw(RSET_SPI, bcm63xx_spireg(o))
+#define bcm_spi_readl(o) bcm_rset_readl(RSET_SPI, bcm63xx_spireg(o))
+#define bcm_spi_writeb(v,o) bcm_rset_writeb(RSET_SPI, (v), bcm63xx_spireg(o))
+#define bcm_spi_writew(v,o) bcm_rset_writew(RSET_SPI, (v), bcm63xx_spireg(o))
+#define bcm_spi_writel(v,o) bcm_rset_writel(RSET_SPI, (v), bcm63xx_spireg(o))
+
+#endif /* BCM63XX_DEV_SPI_H */
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile