ralink: mt7621 has a different base addr for PVID

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43243

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c

@@ -27,6 +27,7 @@
 
 #define MT7620A_CDMA_CSG_CFG	0x400
 #define MT7620_DMA_VID		(MT7620A_CDMA_CSG_CFG | 0x30)
+#define MT7621_DMA_VID		0xa8
 #define MT7620A_DMA_2B_OFFSET	BIT(31)
 #define MT7620A_RESET_FE	BIT(21)
 #define MT7621_RESET_FE		BIT(6)
@@ -76,6 +77,23 @@ static const u32 mt7620_reg_table[FE_REG_COUNT] = {
 	[FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
 };
 
+static const u32 mt7621_reg_table[FE_REG_COUNT] = {
+	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
+	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
+	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
+	[FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
+	[FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
+	[FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
+	[FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
+	[FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
+	[FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
+	[FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
+	[FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
+	[FE_REG_FE_DMA_VID_BASE] = MT7621_DMA_VID,
+	[FE_REG_FE_COUNTER_BASE] = MT7620_GDM1_TX_GBCNT,
+	[FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
+};
+
 static void mt7620_fe_reset(void)
 {
 	u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
@@ -213,7 +231,7 @@ static struct fe_soc_data mt7621_data = {
 	.rx_dma = mt7620_rx_dma,
 	.switch_init = mt7620_gsw_probe,
 	.switch_config = mt7621_gsw_config,
-	.reg_table = mt7620_reg_table,
+	.reg_table = mt7621_reg_table,
 	.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
 	.rx_dly_int = RT5350_RX_DLY_INT,
 	.tx_dly_int = RT5350_TX_DLY_INT,