This commit fixes a weakness of the key-encryption-key
derivation for SSE-C encrypted objects. Before this
change the key-encryption-key was not bound to / didn't
depend on the object path. This allows an attacker to
repalce objects - encrypted with the same
client-key - with each other.
This change fixes this issue by updating the
key-encryption-key derivation to include:
- the domain (in this case SSE-C)
- a canonical object path representation
- the encryption & key derivation algorithm
Changing the object path now causes the KDF to derive a
different key-encryption-key such that the object-key
unsealing fails.
Including the domain (SSE-C) and encryption & key
derivation algorithm is not directly neccessary for this
fix. However, both will be included for the SSE-S3 KDF.
So they are included here to avoid updating the KDF
again when we add SSE-S3.
The leagcy KDF 'DARE-SHA256' is only used for existing
objects and never for new objects / key rotation.
This PR adds CopyObject support for objects residing in buckets
in different Minio instances (where Minio instances are part of
a federated setup).
Also, added support for multiple Minio domain IPs. This is required
for distributed deployments, where one deployment may have multiple
nodes, each with a different public IP.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
This PR adds disk based edge caching support for minio server.
Cache settings can be configured in config.json to take list of disk drives,
cache expiry in days and file patterns to exclude from cache or via environment
variables MINIO_CACHE_DRIVES, MINIO_CACHE_EXCLUDE and MINIO_CACHE_EXPIRY
Design assumes that Atime support is enabled and the list of cache drives is
fixed.
- Objects are cached on both GET and PUT/POST operations.
- Expiry is used as hint to evict older entries from cache, or if 80% of cache
capacity is filled.
- When object storage backend is down, GET, LIST and HEAD operations fetch
object seamlessly from cache.
Current Limitations
- Bucket policies are not cached, so anonymous operations are not supported in
offline mode.
- Objects are distributed using deterministic hashing among list of cache
drives specified.If one or more drives go offline, or cache drive
configuration is altered - performance could degrade to linear lookup.
Fixes#4026
This is a trival fix to support server level WORM. The feature comes
with an environment variable `MINIO_WORM`.
Usage:
```
$ export MINIO_WORM=on
$ minio server endpoint
```
Fix a compatibility issue with AWS S3 where to do key rotation
we need to replace an existing object's metadata. In such a
scenario "REPLACE" metadata directive is not necessary.
Current code didn't implement the logic to support
decrypting encrypted multiple parts, this PR fixes
by supporting copying encrypted multipart objects.
*) Add Put/Get support of multipart in encryption
*) Add GET Range support for encryption
*) Add CopyPart encrypted support
*) Support decrypting of large single PUT object
Refactor such that metadata and etag are
combined to a single argument `srcInfo`.
This is a precursor change for #5544 making
it easier for us to provide encryption/decryption
functions.
Since we do not encrypt directories we don't need to send
errors with encryption headers when the directory doesn't
have encryption metadata.
Continuation PR from 4ca10479b5
This change adds an object size check such that the server does not
encrypt empty objects (typically folders) for SSE-C. The server still
returns SSE-C headers but the object is not encrypted since there is no
point to encrypt such objects.
Fixes#5493
x-amz-content-sha256 can be optional for any AWS signature v4
requests, make sure to skip sha256 calculation when payload
checksum is not set.
Here is the overall expected behavior
** Signed request **
- X-Amz-Content-Sha256 is set to 'empty' or some 'value' or its
not 'UNSIGNED-PAYLOAD'- use it to validate the incoming payload.
- X-Amz-Content-Sha256 is set to 'UNSIGNED-PAYLOAD' - skip checksum verification
- X-Amz-Content-Sha256 is not set we use emptySHA256
** Presigned request **
- X-Amz-Content-Sha256 is set to 'empty' or some 'value' or its
not 'UNSIGNED-PAYLOAD'- use it to validate the incoming payload
- X-Amz-Content-Sha256 is set to 'UNSIGNED-PAYLOAD' - skip checksum verification
- X-Amz-Content-Sha256 is not set we use 'UNSIGNED-PAYLOAD'
Fixes#5339
- Add storage class metadata validation for request header
- Change storage class header values to be consistent with AWS S3
- Refactor internal method to take only the reqd argument
- Adds a metadata argument to the CopyObjectPart API to facilitate
implementing encryption for copying APIs too.
- Update vendored minio-go - this version implements the
CopyObjectPart client API for use with the S3 gateway.
Fixes#4885
This change introduces following simplified steps to follow
during config migration.
```
// Steps to move from version N to version N+1
// 1. Add new struct serverConfigVN+1 in config-versions.go
// 2. Set configCurrentVersion to "N+1"
// 3. Set serverConfigCurrent to serverConfigVN+1
// 4. Add new migration function (ex. func migrateVNToVN+1()) in config-migrate.go
// 5. Call migrateVNToVN+1() from migrateConfig() in config-migrate.go
// 6. Make changes in config-current_test.go for any test change
```
This change brings public data-types such that
we can ask projects to implement gateway projects
externally than maintaining in our repo.
All publicly exported structs are maintained in object-api-datatypes.go
completePart --> CompletePart
uploadMetadata --> MultipartInfo
All other exported errors are at object-api-errors.go
This change adds server-side-encryption support for HEAD, GET and PUT
operations. This PR only addresses single-part PUTs and GETs without
HTTP ranges.
Further this change adds the concept of reserved object metadata which is required
to make encrypted objects tamper-proof and provide API compatibility to AWS S3.
This PR adds the following reserved metadata entries:
- X-Minio-Internal-Server-Side-Encryption-Iv ('guarantees' tamper-proof property)
- X-Minio-Internal-Server-Side-Encryption-Kdf (makes Key-MAC computation negotiable in future)
- X-Minio-Internal-Server-Side-Encryption-Key-Mac (provides AWS S3 API compatibility)
The prefix `X-Minio_Internal` specifies an internal metadata entry which must not
send to clients. All client requests containing a metadata key starting with `X-Minio-Internal`
must also rejected. This is implemented by a generic-handler.
This PR implements SSE-C separated from client-side-encryption (CSE). This cannot decrypt
server-side-encrypted objects on the client-side. However, clients can encrypted the same object
with CSE and SSE-C.
This PR does not address:
- SSE-C Copy and Copy part
- SSE-C GET with HTTP ranges
- SSE-C multipart PUT
- SSE-C Gateway
Each point must be addressed in a separate PR.
Added to vendor dir:
- x/crypto/chacha20poly1305
- x/crypto/poly1305
- github.com/minio/sio
It is possible that x-amz-content-sha256 is set through
the query params in case of presigned PUT calls, make sure
that we validate the incoming x-amz-content-sha256 properly.
Current code simply just allows this without honoring the
set x-amz-content-sha256, fix it.
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
This change refactor the ObjectLayer PutObject and PutObjectPart
functions. Instead of passing an io.Reader and a size to PUT operations
ObejectLayer expects an HashReader.
A HashReader verifies the MD5 sum (and SHA256 sum if required) of the object.
This change updates all all PutObject(Part) calls and removes unnecessary code
in all ObjectLayer implementations.
Fixes#4923
Praveen raj Mani