Add context to all (non-trivial) calls to the storage layer.
Contexts are propagated through the REST client.
- `context.TODO()` is left in place for the places where it needs to be added to the caller.
- `endWalkCh` could probably be removed from the walkers, but no changes so far.
The "dangerous" part is that now a caller disconnecting *will* propagate down, so a
"delete" operation will now be interrupted. In some cases we might want to disconnect
this functionality so the operation completes if it has started, leaving the system in a cleaner state.
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
With reduced parity our write quorum should be same
as read quorum, but code was still assuming
```
readQuorum+1
```
In all situations which is not necessary.
object KMS is configured with auto-encryption,
there were issues when using docker registry -
this has been left unnoticed for a while.
This PR fixes an issue with compatibility.
Additionally also fix the continuation-token implementation
infinite loop issue which was missed as part of #9939
Also fix the heal token to be generated as a client
facing value instead of what is remembered by the
server, this allows for the server to be stateless
regarding the token's behavior.
Bonus fix during versioning merge one of the PR was missing
the offline/online disk count fix from #9801 port it correctly
over to the master branch from release.
Additionally, add versionID support for MRF
Fixes#9910Fixes#9931
Just like GET/DELETE APIs it is possible to preserve
client supplied versionId's, of course the versionIds
have to be uuid, if an existing versionId is found
it is overwritten if no object locking policies
are found.
- PUT /bucketname/objectname?versionId=<id>
- POST /bucketname/objectname?uploads=&versionId=<id>
- PUT /bucketname/objectname?verisonId=<id> (with x-amz-copy-source)
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
Advantages avoids 100's of stats which are needed for each
upload operation in FS/NAS gateway mode when uploading a large
multipart object, dramatically increases performance for
multipart uploads by avoiding recursive calls.
For other gateway's simplifies the approach since
azure, gcs, hdfs gateway's don't capture any specific
metadata during upload which needs handler validation
for encryption/compression.
Erasure coding was already optimized, additionally
just avoids small allocations of large data structure.
Fixes#7206
this is a major overhaul by migrating off all
bucket metadata related configs into a single
object '.metadata.bin' this allows us for faster
bootups across 1000's of buckets and as well
as keeps the code simple enough for future
work and additions.
Additionally also fixes#9396, #9394
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
global WORM mode is a complex piece for which
the time has passed, with the advent of S3 compatible
object locking and retention implementation global
WORM is sort of deprecated, this has been mentioned
in our documentation for some time, now the time
has come for this to go.
Too many deployments come up with an odd number
of hosts or drives, to facilitate even distribution
among those setups allow for odd and prime numbers
based packs.
This is a precursor change before versioning,
removes/deprecates the requirement of remembering
partName and partETag which are not useful after
a multipart transaction has finished.
This PR reduces the overall size of the backend
JSON for large file uploads.
object lock config is enabled for a bucket.
Creating a bucket with object lock configuration
enabled does not automatically cause WORM protection
to be applied. PUT operation needs to specifically
request object locking or bucket has to have default
retention settings configured.
Fixes regression introduced in #8657
This ensures that we can update the
- .minio.sys is updated for accounting/data usage purposes
- .minio.sys is updated to indicate if backend is encrypted
or not.
level - this PR builds on #8120 which
added PutBucketObjectLockConfiguration and
GetBucketObjectLockConfiguration APIS
This PR implements PutObjectRetention,
GetObjectRetention API and enhances
PUT and GET API operations to display
governance metadata if permissions allow.
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
specific errors, `application` errors or `all` by default.
console logging on server by default lists all logs -
enhance admin console API to accept `type` as query parameter to
subscribe to application/minio logs.
This commit fixes a subtle bug that (probably)
caused an issue affecting encrypted multipart objects.
When a cluster has no quorum this bug causes `ListObjectParts`
to return nil as error instead of a quorum error.
Thanks to @harshavardhana for detecting this.
One user has seen this following error log:
API: CompleteMultipartUpload(bucket=vertica, object=perf-dss-v03/cc2/02596813aecd4e476d810148586c2a3300d00000013557ef_0.gt)
Time: 15:44:07 UTC 04/11/2019
RequestID: 159475EFF4DEDFFB
RemoteHost: 172.26.87.184
UserAgent: vertica-v9.1.1-5
Error: open /data/.minio.sys/tmp/100bb3ec-6c0d-4a37-8b36-65241050eb02/xl.json: file exists
1: cmd/xl-v1-metadata.go:448:cmd.writeXLMetadata()
2: cmd/xl-v1-metadata.go:501:cmd.writeUniqueXLMetadata.func1()
This can happen when CompleteMultipartUpload fails with write quorum,
the S3 client will retry (since write quorum is 500 http response),
however the second call of CompleteMultipartUpload will fail because
this latter doesn't truly use a random uuid under .minio.sys/tmp/
directory but pick the upload id.
This commit fixes the behavior to choose a random uuid for generating
xl.json
Other listing optimizations include
- remove double sorting while filtering object entries
- improve error message when upload-id is not in quorum
- use jsoniter for full unmarshal json, instead of gjson
- remove unused code
In scenario 1
```
- bucket/object-prefix
- bucket/object-prefix/object
```
Server responds with `XMinioParentIsObject`
In scenario 2
```
- bucket/object-prefix/object
- bucket/object-prefix
```
Server responds with `XMinioObjectExistsAsDirectory`
Fixes#6566
ListObjectParts is using xl.readXLMetaParts which picks the first
xl meta found in any disk, which is an inconsistent information.
E.g.: In a middle of a multipart upload, one node can go offline
and get back later with an outdated multipart information.
Klaus Post