reference format should be source of truth
for inconsistent drives which reconnect,
add them back to their original position
remove automatic fix for existing offline
disk uuids
Bonus fixes
- logging improvements to ensure that we don't use
`go logger.LogIf` to avoid runtime.Caller missing
the function name. log where necessary.
- remove unused code at erasure sets
connect disks pre-emptively upon startup, to ensure we have
enough disks are connected at startup rather than wait
for them.
we need to do this to avoid long wait times for server to
be online when we have servers come up in rolling upgrade
fashion
This PR fixes a hang which occurs quite commonly at higher concurrency
by allowing following changes
- allowing lower connections in time_wait allows faster socket open's
- lower idle connection timeout to ensure that we let kernel
reclaim the time_wait connections quickly
- increase somaxconn to 4096 instead of 2048 to allow larger tcp
syn backlogs.
fixes#10413
- select lockers which are non-local and online to have
affinity towards remote servers for lock contention
- optimize lock retry interval to avoid sending too many
messages during lock contention, reduces average CPU
usage as well
- if bucket is not set, when deleteObject fails make sure
setPutObjHeaders() honors lifecycle only if bucket name
is set.
- fix top locks to list out always the oldest lockers always,
avoid getting bogged down into map's unordered nature.
add a hint on the disk to allow for tracking fresh disk
being healed, to allow for restartable heals, and also
use this as a way to track and remove disks.
There are more pending changes where we should move
all the disk formatting logic to backend drives, this
PR doesn't deal with this refactor instead makes it
easier to track healing in the future.
- Add owner information for expiry, locking, unlocking a resource
- TopLocks returns now locks in quorum by default, provides
a way to capture stale locks as well with `?stale=true`
- Simplify the quorum handling for locks to avoid from storage
class, because there were challenges to make it consistent
across all situations.
- And other tiny simplifications to reset locks.
Also, revamp the way ListBuckets work make few portions
of the healing logic parallel
- walk objects for healing disks in parallel
- collect the list of buckets in parallel across drives
- provide consistent view for listBuckets()
It was observed in VMware vsphere environment during a
pod replacement, `mc admin info` might report incorrect
offline nodes for the replaced drive. This issue eventually
goes away but requires quite a lot of time for all servers
to be in sync.
This PR fixes this behavior properly.
This is to ensure that Go contexts work properly, after some
interesting experiments I found that Go net/http doesn't
cancel the context when Body is non-zero and hasn't been
read till EOF.
The following gist explains this, this can lead to pile up
of go-routines on the server which will never be canceled
and will die at a really later point in time, which can
simply overwhelm the server.
https://gist.github.com/harshavardhana/c51dcfd055780eaeb71db54f9c589150
To avoid this refactor the locking such that we take locks after we
have started reading from the body and only take locks when needed.
Also, remove contextReader as it's not useful, doesn't work as expected
context is not canceled until the body reaches EOF so there is no point
in wrapping it with context and putting a `select {` on it which
can unnecessarily increase the CPU overhead.
We will still use the context to cancel the lockers etc.
Additional simplification in the locker code to avoid timers
as re-using them is a complicated ordeal avoid them in
the hot path, since locking is very common this may avoid
lots of allocations.
inconsistent drive healing when one of the drive is offline
while a new drive was replaced, this change is to ensure
that we can add the offline drive back into the mix by
healing it again.
Add context to all (non-trivial) calls to the storage layer.
Contexts are propagated through the REST client.
- `context.TODO()` is left in place for the places where it needs to be added to the caller.
- `endWalkCh` could probably be removed from the walkers, but no changes so far.
The "dangerous" part is that now a caller disconnecting *will* propagate down, so a
"delete" operation will now be interrupted. In some cases we might want to disconnect
this functionality so the operation completes if it has started, leaving the system in a cleaner state.
We can reduce this further in the future, but this is a good
value to keep around. With the advent of continuous healing,
we can be assured that namespace will eventually be
consistent so we are okay to avoid the necessity to
a list across all drives on all sets.
Bonus Pop()'s in parallel seem to have the potential to
wait too on large drive setups and cause more slowness
instead of gaining any performance remove it for now.
Also, implement load balanced reply for local disks,
ensuring that local disks have an affinity for
- cleanupStaleMultipartUploads()
fresh drive setups when one of the drive is
a root drive, we should ignore such a root
drive and not proceed to format.
This PR handles this properly by marking
the disks which are root disk and they are
taken offline.
It is possible in situations when server was deployed
in asymmetric configuration in the past such as
```
minio server ~/fs{1...4}/disk{1...5}
```
Results in setDriveCount of 10 in older releases
but with fairly recent releases we have moved to
having server affinity which means that a set drive
count ascertained from above config will be now '4'
While the object layer make sure that we honor
`format.json` the storageClass configuration however
was by mistake was using the global value obtained
by heuristics. Which leads to prematurely using
lower parity without being requested by the an
administrator.
This PR fixes this behavior.
when source and destination are same and versioning is enabled
on the destination bucket - we do not need to re-create the entire
object once again to optimize on space utilization.
Cases this PR is not supporting
- any pre-existing legacy object will not
be preserved in this manner, meaning a new
dataDir will be created.
- key-rotation and storage class changes
of course will never re-use the dataDir
healing was not working properly when drives were
replaced, due to the error check in root disk
calculation this PR fixes this behavior
This PR also adds additional fix for missing
metadata entries from .minio.sys as part of
disk healing as well.
Added code to ignore and print more context
sensitive errors for better debugging.
This PR is continuation of fix in 7b14e9b660
- admin info node offline check is now quicker
- admin info now doesn't duplicate the code
across doing the same checks for disks
- rely on StorageInfo to return appropriate errors
instead of calling locally.
- diskID checks now return proper errors when
disk not found v/s format.json missing.
- add more disk states for more clarity on the
underlying disk errors.
The S3 specification says that versions are ordered in the response of
list object versions.
mc snapshot needs this to know which version comes first especially when
two versions have the same exact last-modified field.
Bonus fix during versioning merge one of the PR was missing
the offline/online disk count fix from #9801 port it correctly
over to the master branch from release.
Additionally, add versionID support for MRF
Fixes#9910Fixes#9931
Just like GET/DELETE APIs it is possible to preserve
client supplied versionId's, of course the versionIds
have to be uuid, if an existing versionId is found
it is overwritten if no object locking policies
are found.
- PUT /bucketname/objectname?versionId=<id>
- POST /bucketname/objectname?uploads=&versionId=<id>
- PUT /bucketname/objectname?verisonId=<id> (with x-amz-copy-source)
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
PR #9801 while it is correct, the loop isEndpointConnected()
was changed to rely on endpoint.String() which has the host
information as well, which is not correct value as input to
detect if the disk is down or up, if endpoint is local use
its local path value instead.
Current code was relying on globalEndpoints as
the source of secondary truth to obtain
the missing endpoints list when the disk
is offline, this is problematic
- there is no way to know if the getDisks()
returned endpoints total is same as the
ones list of globalEndpoints and it
belongs to a particular set.
- there is no order guarantee as getDisks()
is ordered as per format.json, globalEndpoints
may not be, so potentially end up including
incorrect endpoints.
To fix this bring getEndpoints() just like getDisks()
to ensure that consistently ordered endpoints are
always available for us to ensure that returned values
are consistent with what each erasure set would observe.
CopyObject was not correctly figuring out the correct
destination object location and would end up creating
duplicate objects on two different zones, reproduced
by doing encryption based key rotation.
Advantages avoids 100's of stats which are needed for each
upload operation in FS/NAS gateway mode when uploading a large
multipart object, dramatically increases performance for
multipart uploads by avoiding recursive calls.
For other gateway's simplifies the approach since
azure, gcs, hdfs gateway's don't capture any specific
metadata during upload which needs handler validation
for encryption/compression.
Erasure coding was already optimized, additionally
just avoids small allocations of large data structure.
Fixes#7206
This value is requested on every upload when there are multiple zones.
Since this will result in an RPC call to every remote disk this scales
quite badly in a distributed setup. Load every 1second interval.
2 servers, localhost only. In large distributed setups much bigger
gains can be expected.
```
Operations: 21743 -> 22454
* Average: +3.28% (+0.0 MiB/s) throughput, +3.28% (+11.9) obj/s
* Fastest: +3.37% (+0.0 MiB/s) throughput, +3.37% (+13.0) obj/s
* 50% Median: +3.03% (+0.0 MiB/s) throughput, +3.03% (+11.2) obj/s
* Slowest: +8.03% (+0.0 MiB/s) throughput, +8.03% (+22.8) obj/s
```
For easy management of this a generic helper has been added.
This PR adds a new configuration parameter which allows readiness
check to respond within 10secs, this can be reduced to a lower value
if necessary using
```
mc admin config set api ready_deadline=5s
```
or
```
export MINIO_API_READY_DEADLINE=5s
```
Shuffling arguments that we pass to MinIO server are supported. However,
when that happens, Prometheus returns wrong information about disks usage
and online/offline status.
The commit fixes the issue by avoiding relying on xl.endpoints since
it is not ordered.
Harshavardhana