In almost all scenarios MinIO now is
mostly ready for all sub-systems
independently, safe-mode is not useful
anymore and do not serve its original
intended purpose.
allow server to be fully functional
even with config partially configured,
this is to cater for availability of actual
I/O v/s manually fixing the server.
In k8s like environments it will never make
sense to take pod into safe-mode state,
because there is no real access to perform
any remote operation on them.
As the bulk/recursive delete will require multiple connections to open at an instance,
The default open connections limit will be reached which results in the following error
```FATAL: sorry, too many clients already```
By setting the open connections to a reasonable value - `2`, We ensure that the max open connections
will not be exhausted and lie under bounds.
The queries are simple inserts/updates/deletes which is operational and sufficient with the
the maximum open connection limit is 2.
Fixes#10553
Allow user configuration for MaxOpenConnections
This commit fixes the nats TLS tests by generating new certificates
(root CA, server and client) - each valid for 10y. The new certificates
don't have a common name (deprecated by X.509) but SANs instead.
Since Go 1.15 the Go `crypto/x509` package rejects certificates that
only have a common name and no SAN. See: https://golang.org/doc/go1.15#commonname
MaxConnsPerHost can potentially hang a call without any
way to timeout, we do not need this setting for our proxy
and gateway implementations instead IdleConn settings are
good enough.
Also ensure to use NewRequestWithContext and make sure to
take the disks offline only for network errors.
Fixes#10304
This commit refactors the certificate management implementation
in the `certs` package such that multiple certificates can be
specified at the same time. Therefore, the following layout of
the `certs/` directory is expected:
```
certs/
│
├─ public.crt
├─ private.key
├─ CAs/ // CAs directory is ignored
│ │
│ ...
│
├─ example.com/
│ │
│ ├─ public.crt
│ └─ private.key
└─ foobar.org/
│
├─ public.crt
└─ private.key
...
```
However, directory names like `example.com` are just for human
readability/organization and don't have any meaning w.r.t whether
a particular certificate is served or not. This decision is made based
on the SNI sent by the client and the SAN of the certificate.
***
The `Manager` will pick a certificate based on the client trying
to establish a TLS connection. In particular, it looks at the client
hello (i.e. SNI) to determine which host the client tries to access.
If the manager can find a certificate that matches the SNI it
returns this certificate to the client.
However, the client may choose to not send an SNI or tries to access
a server directly via IP (`https://<ip>:<port>`). In this case, we
cannot use the SNI to determine which certificate to serve. However,
we also should not pick "the first" certificate that would be accepted
by the client (based on crypto. parameters - like a signature algorithm)
because it may be an internal certificate that contains internal hostnames.
We would disclose internal infrastructure details doing so.
Therefore, the `Manager` returns the "default" certificate when the
client does not specify an SNI. The default certificate the top-level
`public.crt` - i.e. `certs/public.crt`.
This approach has some consequences:
- It's the operator's responsibility to ensure that the top-level
`public.crt` does not disclose any information (i.e. hostnames)
that are not publicly visible. However, this was the case in the
past already.
- Any other `public.crt` - except for the top-level one - must not
contain any IP SAN. The reason for this restriction is that the
Manager cannot match a SNI to an IP b/c the SNI is the server host
name. The entire purpose of SNI is to indicate which host the client
tries to connect to when multiple hosts run on the same IP. So, a
client will not set the SNI to an IP.
If we would allow IP SANs in a lower-level `public.crt` a user would
expect that it is possible to connect to MinIO directly via IP address
and that the MinIO server would pick "the right" certificate. However,
the MinIO server cannot determine which certificate to serve, and
therefore always picks the "default" one. This may lead to all sorts
of confusing errors like:
"It works if I use `https:instance.minio.local` but not when I use
`https://10.0.2.1`.
These consequences/limitations should be pointed out / explained in our
docs in an appropriate way. However, the support for multiple
certificates should not have any impact on how deployment with a single
certificate function today.
Co-authored-by: Harshavardhana <harsha@minio.io>
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
some clients such as veeam expect the x-amz-meta to
be sent in lower cased form, while this does indeed
defeats the HTTP protocol contract it is harder to
change these applications, while these applications
get fixed appropriately in future.
x-amz-meta is usually sent in lowercased form
by AWS S3 and some applications like veeam
incorrectly end up relying on the case sensitivity
of the HTTP headers.
Bonus fixes
- Fix the iso8601 time format to keep it same as
AWS S3 response
- Increase maxObjectList to 50,000 and use
maxDeleteList as 10,000 whenever multi-object
deletes are needed.
enable linter using golangci-lint across
codebase to run a bunch of linters together,
we shall enable new linters as we fix more
things the codebase.
This PR fixes the first stage of this
cleanup.
- elasticsearch client should rely on the SDK helpers
instead of pure HTTP calls.
- webhook shouldn't need to check for IsActive() for
all notifications, failure should be delayed.
- Remove DialHTTP as its never used properly
Fixes#9460
this commit avoids lots of tiny allocations, repeated
channel creates which are performed when filtering
the incoming events, unescaping a key just for matching.
also remove deprecated code which is not needed
anymore, avoids unexpected data structure transformations
from the map to slice.
New value defaults to 100K events by default,
but users can tune this value upto any value
they seem necessary.
* increase the limit to maxint64 while validating
- Introduced a function `FetchRegisteredTargets` which will return
a complete set of registered targets irrespective to their states,
if the `returnOnTargetError` flag is set to `False`
- Refactor NewTarget functions to return non-nil targets
- Refactor GetARNList() to return a complete list of configured targets
The server info handler makes a http connection to other
nodes to check if they are up but does not load the custom
CAs in ~/.minio/certs/CAs.
This commit fix it.
Co-authored-by: Harshavardhana <harsha@minio.io>
- Stop spawning store replay routines when testing the notification targets
- Properly honor the target.Close() to clean the resources used
Fixes#8707
Co-authored-by: Harshavardhana <harsha@minio.io>
Final update to all messages across sub-systems
after final review, the only change here is that
NATS now has TLS and TLSSkipVerify to be consistent
for all other notification targets.
Klaus Post