This is to ensure that Go contexts work properly, after some
interesting experiments I found that Go net/http doesn't
cancel the context when Body is non-zero and hasn't been
read till EOF.
The following gist explains this, this can lead to pile up
of go-routines on the server which will never be canceled
and will die at a really later point in time, which can
simply overwhelm the server.
https://gist.github.com/harshavardhana/c51dcfd055780eaeb71db54f9c589150
To avoid this refactor the locking such that we take locks after we
have started reading from the body and only take locks when needed.
Also, remove contextReader as it's not useful, doesn't work as expected
context is not canceled until the body reaches EOF so there is no point
in wrapping it with context and putting a `select {` on it which
can unnecessarily increase the CPU overhead.
We will still use the context to cancel the lockers etc.
Additional simplification in the locker code to avoid timers
as re-using them is a complicated ordeal avoid them in
the hot path, since locking is very common this may avoid
lots of allocations.
It is possible in situations when server was deployed
in asymmetric configuration in the past such as
```
minio server ~/fs{1...4}/disk{1...5}
```
Results in setDriveCount of 10 in older releases
but with fairly recent releases we have moved to
having server affinity which means that a set drive
count ascertained from above config will be now '4'
While the object layer make sure that we honor
`format.json` the storageClass configuration however
was by mistake was using the global value obtained
by heuristics. Which leads to prematurely using
lower parity without being requested by the an
administrator.
This PR fixes this behavior.
Walk() functionality was missing on gateway
implementations leading to missing functionality
for the browser UI such as remove multiple objects,
download as zip file etc.
This PR brings a generic implementation across
all gateway's, it is not required to repeat the
same code in all gateway's
- Implement a new xl.json 2.0.0 format to support,
this moves the entire marshaling logic to POSIX
layer, top layer always consumes a common FileInfo
construct which simplifies the metadata reads.
- Implement list object versions
- Migrate to siphash from crchash for new deployments
for object placements.
Fixes#2111
Advantages avoids 100's of stats which are needed for each
upload operation in FS/NAS gateway mode when uploading a large
multipart object, dramatically increases performance for
multipart uploads by avoiding recursive calls.
For other gateway's simplifies the approach since
azure, gcs, hdfs gateway's don't capture any specific
metadata during upload which needs handler validation
for encryption/compression.
Erasure coding was already optimized, additionally
just avoids small allocations of large data structure.
Fixes#7206
This PR is to ensure that we call the relevant object
layer APIs for necessary S3 API level functionalities
allowing gateway implementations to return proper
errors as NotImplemented{}
This allows for all our tests in mint to behave
appropriately and can be handled appropriately as
well.
By monitoring PUT/DELETE and heal operations it is possible
to track changed paths and keep a bloom filter for this data.
This can help prioritize paths to scan. The bloom filter can identify
paths that have not changed, and the few collisions will only result
in a marginal extra workload. This can be implemented on either a
bucket+(1 prefix level) with reasonable performance.
The bloom filter is set to have a false positive rate at 1% at 1M
entries. A bloom table of this size is about ~2500 bytes when serialized.
To not force a full scan of all paths that have changed cycle bloom
filters would need to be kept, so we guarantee that dirty paths have
been scanned within cycle runs. Until cycle bloom filters have been
collected all paths are considered dirty.
As an optimization of the healing, HealObjects() avoid sending an
object to the background healing subsystem when the object is
present in all disks.
However, HealObjects() should have checked the scan type, if this
deep, always pass the object to the healing subsystem.
Change distributed locking to allow taking bulk locks
across objects, reduces usually 1000 calls to 1.
Also allows for situations where multiple clients sends
delete requests to objects with following names
```
{1,2,3,4,5}
```
```
{5,4,3,2,1}
```
will block and ensure that we do not fail the request
on each other.
- pkg/bucket/encryption provides support for handling bucket
encryption configuration
- changes under cmd/ provide support for AES256 algorithm only
Co-Authored-By: Poorna <poornas@users.noreply.github.com>
Co-authored-by: Harshavardhana <harsha@minio.io>
On every restart of the server, usage was being
calculated which is not useful instead wait for
sufficient time to start the crawling routine.
This PR also avoids lots of double allocations
through strings, optimizes usage of string builders
and also avoids crawling through symbolic links.
Fixes#8844
This PR adds support below metrics
- Cache Hit Count
- Cache Miss Count
- Data served from Cache (in Bytes)
- Bytes received from AWS S3
- Bytes sent to AWS S3
- Number of requests sent to AWS S3
Fixes#8549
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
Current master repeatedly calls ListBuckets() during
initialization of multiple sub-systems
Use single ListBuckets() call for each sub-system as
follows
- LifeCycle
- Policy
- Notification
This PR is based off @sinhaashish's PR for object lifecycle
management, which includes support only for,
- Expiration of object
- Filter using object prefix (_not_ object tags)
N B the code for actual expiration of objects will be included in a
subsequent PR.
- Background Heal routine receives heal requests from a channel, either to
heal format, buckets or objects
- Daily sweeper lists all objects in all buckets, these objects
don't necessarly have read quorum so they can be removed if
these objects are unhealable
- Heal daily ops receives objects from the daily sweeper
and send them to the heal routine.
Healing scan used to read all objects parts to check for bitrot
checksum. This commit will add a quicker way of healing scan
by only checking if parts are actually present in disks or not.
Bucket metadata healing in the current code was executed multiple
times each time for a given set. Bucket metadata just like
objects are hashed in accordance with its name on any given set,
to allow hashing to play a role we should let the top level
code decide where to navigate.
Current code also had 3 bucket metadata files hardcoded, whereas
we should make it generic by listing and navigating the .minio.sys
to heal such objects.
We also had another bug where due to isObjectDangling changes
without pre-existing bucket metadata files, we were erroneously
reporting it as grey/corrupted objects.
This PR fixes all of the above items.
foo.CORRUPTED should never be created because when
multiple sets are involved we would hash the file
to wrong a location, this PR removes the code.
But allows DeleteBucket() to work properly to delete
dangling buckets/objects. Also adds another option
to Healing where a user needs to specify `--remove`
such that all dangling objects will be deleted with
user confirmation.
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
To conform with AWS S3 Spec on ETag for SSE-S3 encrypted objects,
encrypt client sent MD5Sum and store it on backend as ETag.Extend
this behavior to SSE-C encrypted objects.
No locks are ever left in memory, we also
have a periodic interval of clearing stale locks
anyways. The lock instrumentation was not complete
and was seldom used.
Deprecate this for now and bring it back later if
it is really needed. This also in-turn seems to improve
performance slightly.
- remove old bucket policy handling
- add new policy handling
- add new policy handling unit tests
This patch brings support to bucket policy to have more control not
limiting to anonymous. Bucket owner controls to allow/deny any rest
API.
For example server side encryption can be controlled by allowing
PUT/GET objects with encryptions including bucket owner.
This PR introduces ReloadFormat API call at objectlayer
to facilitate this. Previously we repurposed HealFormat
but we never ended up updating our reference format on
peers.
Fixes#5700
Refactor such that metadata and etag are
combined to a single argument `srcInfo`.
This is a precursor change for #5544 making
it easier for us to provide encryption/decryption
functions.
This PR implements an object layer which
combines input erasure sets of XL layers
into a unified namespace.
This object layer extends the existing
erasure coded implementation, it is assumed
in this design that providing > 16 disks is
a static configuration as well i.e if you started
the setup with 32 disks with 4 sets 8 disks per
pack then you would need to provide 4 sets always.
Some design details and restrictions:
- Objects are distributed using consistent ordering
to a unique erasure coded layer.
- Each pack has its own dsync so locks are synchronized
properly at pack (erasure layer).
- Each pack still has a maximum of 16 disks
requirement, you can start with multiple
such sets statically.
- Static sets set of disks and cannot be
changed, there is no elastic expansion allowed.
- Static sets set of disks and cannot be
changed, there is no elastic removal allowed.
- ListObjects() across sets can be noticeably
slower since List happens on all servers,
and is merged at this sets layer.
Fixes#5465Fixes#5464Fixes#5461Fixes#5460Fixes#5459Fixes#5458Fixes#5460Fixes#5488Fixes#5489Fixes#5497Fixes#5496
Harshavardhana