- Changes related to moving admin APIs
- admin APIs now have an endpoint under /minio/admin
- admin APIs are now versioned - a new API to server the version is
added at "GET /minio/admin/version" and all API operations have the
path prefix /minio/admin/v1/<operation>
- new service stop API added
- credentials change API is moved to /minio/admin/v1/config/credential
- credentials change API and configuration get/set API now require TLS
so that credentials are protected
- all API requests now receive JSON
- heal APIs are disabled as they will be changed substantially
- Heal API changes
Heal API is now provided at a single endpoint with the ability for a
client to start a heal sequence on all the data in the server, a
single bucket, or under a prefix within a bucket.
When a heal sequence is started, the server returns a unique token
that needs to be used for subsequent 'status' requests to fetch heal
results.
On each status request from the client, the server returns heal result
records that it has accumulated since the previous status request. The
server accumulates upto 1000 records and pauses healing further
objects until the client requests for status. If the client does not
request any further records for a long time, the server aborts the
heal sequence automatically.
A heal result record is returned for each entity healed on the server,
such as system metadata, object metadata, buckets and objects, and has
information about the before and after states on each disk.
A client may request to force restart a heal sequence - this causes
the running heal sequence to be aborted at the next safe spot and
starts a new heal sequence.
Verify() was being called by caller after the data
has been successfully read after io.EOF. This disconnection
opens a race under concurrent access to such an object.
Verification is not necessary outside of Read() call,
we can simply just do checksum verification right inside
Read() call at io.EOF.
This approach simplifies the usage.
It can happen that an incoming PutObject() request might
have inputs of following form eg:-
- bucketName is 'testbucket'
- objectName is '/'
bucketName exists and was previously created but there
are no other objects in this bucket. In a situation like
this parentDirIsObject() goes into an infinite loop.
Verifying that if '/' is an object fails on both backends
but the resulting `path.Dir('/')` returns `'/'` this causes
the closure to loop onto itself.
Fixes#4940
This change refactor the ObjectLayer PutObject and PutObjectPart
functions. Instead of passing an io.Reader and a size to PUT operations
ObejectLayer expects an HashReader.
A HashReader verifies the MD5 sum (and SHA256 sum if required) of the object.
This change updates all all PutObject(Part) calls and removes unnecessary code
in all ObjectLayer implementations.
Fixes#4923
Since go1.8 os.RemoveAll and os.MkdirAll both support long
path names i.e UNC path on windows. The code we are carrying
was directly borrowed from `pkg/os` package and doesn't need
to be in our repo anymore. As a side affect this also
addresses our codecoverage issue.
Refer #4658
This patch also reverts previous changes which were
merged for migration to the newer disk format. We will
be bringing these changes in subsequent releases. But
we wish to add protection in this release such that
future release migrations are protected.
Revert "fs: Migration should handle bucketConfigs as regular objects. (#4482)"
This reverts commit 976870a391.
Revert "fs: Migrate object metadata to objects directory. (#4195)"
This reverts commit 76f4f20609.
Current code failed to anticipate the existence of files
which could have been created to corrupt the namespace such
as `policy.json` file created at the bucket top level.
In the current release creating such as file conflicts
with the namespace for future bucket policy operations.
We implemented migration of backend format to avoid situations
such as these.
This PR handles this situation, makes sure that the
erroneous files should have been moved properly.
Fixes#4478
Currently even when bucket doesn't exist we wrongly
return success, when an object is a directory prefix with
'/' as suffix and is of size 0.
This PR fixes this behavior.
This PR also does backend format change to 1.0.1
from 1.0.0. Backward compatible changes are still
kept to read the 'md5Sum' key. But all new objects
will be stored with the same details under 'etag'.
Fixes#4312
`disksUnavailable` healStatus constant indicates that a given object
needs healing but one or more of disks requiring heal are offline. This
can be used by admin heal API consumers to distinguish between a
successful heal and a no-op since the outdated disks were offline.
This is a consolidation effort, avoiding usage
of naked strings in codebase. Whenever possible
use constants which can be repurposed elsewhere.
This also fixes `goconst ./...` reported issues.
This patch uses a technique where in a retryable storage
before object layer initialization has a higher delay
and waits for longer period upto 4 times with time unit
of seconds.
And uses another set of configuration after the disks
have been formatted, i.e use a lower retry backoff rate
and retrying only once per 5 millisecond.
Network IO error count is reduced to a lower value i.e 256
before we reject the disk completely. This is done so that
combination of retry logic and total error count roughly
come to around 2.5secs which is when we basically take the
disk offline completely.
NOTE: This patch doesn't fix the issue of what if the disk
is completely dead and comes back again after the initialization.
Such a mutating state requires a change in our startup sequence
which will be done subsequently. This is an interim fix to alleviate
users from these issues.
This is needed to validate if the `format.json` indeed exists
when a fresh node is brought online.
This wrapped implementation also connects to the remote node
by attempting a re-login. Subsequently after a successful
connect `format.json` is validated as well.
Fixes#3207
Ref #3229
After review with @abperiasamy we decided to remove all the unnecessary options
- MINIO_BROWSER (Implemented as a security feature but now deemed obsolete
since even if blocking access to MINIO_BROWSER, s3 API port is open)
- MINIO_CACHE_EXPIRY (Defaults to 72h)
- MINIO_MAXCONN (No one used this option and we don't test this)
- MINIO_ENABLE_FSMETA (Enable FSMETA all the time)
Remove --ignore-disks option - this option was implemented when XL layer
would initialize the backend disks and heal them automatically to disallow
XL accidentally using the root partition itself this option was introduced.
This behavior has been changed XL no longer automatically initializes
`format.json` a HEAL is controlled activity, so ignore-disks is not
useful anymore. This change also addresses the problems of our documentation
going forward and keeps things simple. This patch brings in reduction of
options and defaulting them to a valid known inputs. This patch also
serves as a guideline of limiting many ways to do the same thing.
For command line arguments we are currently following
- <node-1>:/path ... <node-n>:/path
This patch changes this to
- http://<node-1>/path ... http://<node-n>/path
These messages based on our prep stage during XL
and prints more informative message regarding
drive information.
This change also does a much needed refactoring.
By default server heals/creates missing directories and re-populates
`format.json`, in some scenarios when disk is down for maintainenance
it would be beneficial for users to ignore such disks rather than
mistakenly using `root` partition.
Fixes#2128
This is necessary for calculating the total storage
capacity from object layer. This value is also needed for
browser UI.
Buckets used to carry this information, this patch
deprecates this feature.
It is the bucket and volumes which needs to have this
value rather than the DiskInfo API itself. Eventually
this can be extended to show disk usage per
Buckets/Volumes whenever we have that functionality.
For now since buckets/volumes are thinly provisioned
this is the right approach.
- Marker should be escaped outside in handlers.
- Delimiter should be handled outside in handlers.
- Add missing comments and change the function names.
- Handle case of 'maxKeys' when its set to '0', its a valid
case and should be treated as such.
* listObjects: improve response time by not doing stat during readDir() operation.
* listObjects: Add windows support.
* listObjects: Readdir() in batches to conserve memory. Add solaris build.
* listObjects: cleanup code.
Aditya Manthramurthy