You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

ZengFei Zhang edae3479e6 ramips: add support for HiWiFi HC5962 ... This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>		8 years ago
..
board.d	ramips: add support for HiWiFi HC5962	8 years ago
hotplug.d	ramips: use the ralink,mtd-eeprom device tree property	8 years ago
init.d	ramips: enablemodem: move /lib/ramips.sh to start()	8 years ago
uci-defaults	ramips: use rfkill for wps button on wlan only boards	8 years ago
diag.sh	ramips: add support for HiWiFi HC5962	8 years ago
inittab	image / basefiles: make console password configurable	9 years ago