You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/mvebu/patches-4.9/220-ARM-dts-armada388-clear...

84 lines
2.1 KiB

From 63ff73593c2f5d3fc1cba479321d192caaca48aa Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 12 Sep 2015 18:43:39 +0100
Subject: [PATCH 738/744] ARM: dts: armada388-clearfog: add SFP module support
Add SFP module support for Clearfog using the SFP phylink support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/dts/armada-388-clearfog.dts | 44 ++++++++-----------------------
1 file changed, 11 insertions(+), 33 deletions(-)
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -90,16 +90,12 @@
};
ethernet@34000 {
+ managed = "in-band-status";
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
bm,pool-short = <1>;
status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
};
i2c@11000 {
@@ -183,34 +179,6 @@
output-low;
line-name = "m.2 devslp";
};
- sfp_los {
- /* SFP loss of signal */
- gpio-hog;
- gpios = <12 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-los";
- };
- sfp_tx_fault {
- /* SFP laser fault */
- gpio-hog;
- gpios = <13 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-tx-fault";
- };
- sfp_tx_disable {
- /* SFP transmit disable */
- gpio-hog;
- gpios = <14 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "sfp-tx-disable";
- };
- sfp_mod_def0 {
- /* SFP module present */
- gpio-hog;
- gpios = <15 GPIO_ACTIVE_LOW>;
- input;
- line-name = "sfp-mod-def0";
- };
};
/* The MCP3021 is 100kHz clock only */
@@ -350,6 +318,16 @@
};
};
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+ sfp,ethernet = <&eth2>;
+ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+ };
+
dsa@0 {
compatible = "marvell,dsa";
dsa,ethernet = <&eth1>;