You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-dr...

1231 lines
34 KiB

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF
If unsure, say N
+config SSB_DRIVER_GIGE
+ bool "SSB Broadcom Gigabit Ethernet driver"
+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
+ help
+ Driver for the Sonics Silicon Backplane attached
+ Broadcom Gigabit Ethernet.
+
+ If unsure, say N
+
endmenu
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
--- /dev/null
+++ b/drivers/ssb/driver_gige.c
@@ -0,0 +1,294 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom Gigabit Ethernet core driver
+ *
+ * Copyright 2008, Broadcom Corporation
+ * Copyright 2008, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+
+
+/*
+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_LICENSE("GPL");
+*/
+
+static const struct ssb_device_id ssb_gige_tbl[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
+
+
+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read8(dev->dev, offset);
+}
+
+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read16(dev->dev, offset);
+}
+
+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read32(dev->dev, offset);
+}
+
+static inline void gige_write8(struct ssb_gige *dev,
+ u16 offset, u8 value)
+{
+ ssb_write8(dev->dev, offset, value);
+}
+
+static inline void gige_write16(struct ssb_gige *dev,
+ u16 offset, u16 value)
+{
+ ssb_write16(dev->dev, offset, value);
+}
+
+static inline void gige_write32(struct ssb_gige *dev,
+ u16 offset, u32 value)
+{
+ ssb_write32(dev->dev, offset, value);
+}
+
+static inline
+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read8(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read16(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read32(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+void gige_pcicfg_write8(struct ssb_gige *dev,
+ unsigned int offset, u8 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static inline
+void gige_pcicfg_write16(struct ssb_gige *dev,
+ unsigned int offset, u16 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static inline
+void gige_pcicfg_write32(struct ssb_gige *dev,
+ unsigned int offset, u32 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 *val)
+{
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+
+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (reg >= 256)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ switch (size) {
+ case 1:
+ *val = gige_pcicfg_read8(dev, reg);
+ break;
+ case 2:
+ *val = gige_pcicfg_read16(dev, reg);
+ break;
+ case 4:
+ *val = gige_pcicfg_read32(dev, reg);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 val)
+{
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+
+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (reg >= 256)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ switch (size) {
+ case 1:
+ gige_pcicfg_write8(dev, reg, val);
+ break;
+ case 2:
+ gige_pcicfg_write16(dev, reg, val);
+ break;
+ case 4:
+ gige_pcicfg_write32(dev, reg, val);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
+{
+ struct ssb_gige *dev;
+ u32 base, tmslow, tmshigh;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->dev = sdev;
+
+ spin_lock_init(&dev->lock);
+ dev->pci_controller.pci_ops = &dev->pci_ops;
+ dev->pci_controller.io_resource = &dev->io_resource;
+ dev->pci_controller.mem_resource = &dev->mem_resource;
+ dev->pci_controller.io_map_base = 0x800;
+ dev->pci_ops.read = ssb_gige_pci_read_config;
+ dev->pci_ops.write = ssb_gige_pci_write_config;
+
+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
+ dev->io_resource.start = 0x800;
+ dev->io_resource.end = 0x8FF;
+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+ if (!ssb_device_is_enabled(sdev))
+ ssb_device_enable(sdev, 0);
+
+ /* Setup BAR0. This is a 64k MMIO region. */
+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
+
+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
+ dev->mem_resource.start = base;
+ dev->mem_resource.end = base + 0x10000 - 1;
+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
+
+ /* Enable the memory region. */
+ gige_pcicfg_write16(dev, PCI_COMMAND,
+ gige_pcicfg_read16(dev, PCI_COMMAND)
+ | PCI_COMMAND_MEMORY);
+
+ /* Write flushing is controlled by the Flush Status Control register.
+ * We want to flush every register write with a timeout and we want
+ * to disable the IRQ mask while flushing to avoid concurrency.
+ * Note that automatic write flushing does _not_ work from
+ * an IRQ handler. The driver must flush manually by reading a register.
+ */
+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
+
+ /* Check if we have an RGMII or GMII PHY-bus.
+ * On RGMII do not bypass the DLLs */
+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
+ dev->has_rgmii = 1;
+ } else {
+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
+ dev->has_rgmii = 0;
+ }
+ tmslow |= SSB_GIGE_TMSLOW_DLLEN;
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+
+ ssb_set_drvdata(sdev, dev);
+ register_pci_controller(&dev->pci_controller);
+
+ return 0;
+}
+
+bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+ if (!pdev->resource[0].name)
+ return 0;
+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
+}
+EXPORT_SYMBOL(pdev_is_ssb_gige_core);
+
+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
+ struct resource *res;
+
+ if (pdev->bus->ops != &dev->pci_ops) {
+ /* The PCI device is not on this SSB GigE bridge device. */
+ return -ENODEV;
+ }
+
+ /* Fixup the PCI resources. */
+ res = &(pdev->resource[0]);
+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
+ res->name = dev->mem_resource.name;
+ res->start = dev->mem_resource.start;
+ res->end = dev->mem_resource.end;
+
+ /* Fixup interrupt lines. */
+ pdev->irq = ssb_mips_irq(sdev) + 2;
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
+
+ return 0;
+}
+
+int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
+
+ if (pdev->bus->ops != &dev->pci_ops) {
+ /* The PCI device is not on this SSB GigE bridge device. */
+ return -ENODEV;
+ }
+
+ return ssb_mips_irq(sdev) + 2;
+}
+
+static struct ssb_driver ssb_gige_driver = {
+ .name = "BCM-GigE",
+ .id_table = ssb_gige_tbl,
+ .probe = ssb_gige_probe,
+};
+
+int ssb_gige_init(void)
+{
+ return ssb_driver_register(&ssb_gige_driver);
+}
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,174 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+
+
+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
+
+/* TM Status High flags */
+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
+/* TM Status Low flags */
+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
+
+/* Boardflags (low) */
+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
+
+
+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
+
+struct ssb_gige {
+ struct ssb_device *dev;
+
+ spinlock_t lock;
+
+ /* True, if the device has an RGMII bus.
+ * False, if the device has a GMII bus. */
+ bool has_rgmii;
+
+ /* The PCI controller device. */
+ struct pci_controller pci_controller;
+ struct pci_ops pci_ops;
+ struct resource mem_resource;
+ struct resource io_resource;
+};
+
+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
+
+/* Convert a pci_dev pointer to a ssb_gige pointer. */
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ if (!pdev_is_ssb_gige_core(pdev))
+ return NULL;
+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
+}
+
+/* Returns whether the PHY is connected by an RGMII bus. */
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ return (dev ? dev->has_rgmii : 0);
+}
+
+/* Returns whether we have a Roboswitch. */
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return !!(dev->dev->bus->sprom.boardflags_lo &
+ SSB_GIGE_BFL_ROBOSWITCH);
+ return 0;
+}
+
+/* Returns whether we can only do one DMA at once. */
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return ((dev->dev->bus->chip_id == 0x4785) &&
+ (dev->dev->bus->chip_rev < 2));
+ return 0;
+}
+
+/* Returns whether we must flush posted writes. */
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return (dev->dev->bus->chip_id == 0x4785);
+ return 0;
+}
+
+extern char * nvram_get(const char *name);
+/* Get the device MAC address */
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+#ifdef CONFIG_BCM947XX
+ char *res = nvram_get("et0macaddr");
+ if (res)
+ memcpy(macaddr, res, 6);
+#endif
+}
+
+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+extern int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev);
+
+/* The GigE driver is not a standalone module, because we don't have support
+ * for unregistering the driver. So we could not unload the module anyway. */
+extern int ssb_gige_init(void);
+static inline void ssb_gige_exit(void)
+{
+ /* Currently we can not unregister the GigE driver,
+ * because we can not unregister the PCI bridge. */
+ BUG();
+}
+
+
+#else /* CONFIG_SSB_DRIVER_GIGE */
+/* Gigabit Ethernet driver disabled */
+
+
+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_init(void)
+{
+ return 0;
+}
+static inline void ssb_gige_exit(void)
+{
+}
+
+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ return NULL;
+}
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -60,78 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
/* Core to access the external PCI config space. Can only have one. */
static struct ssb_pcicore *extpci_core;
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
-int pcibios_plat_dev_init(struct pci_dev *d)
-{
- struct resource *res;
- int pos, size;
- u32 *base;
-
- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
- pci_name(d));
-
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
- /* Fix up interrupt lines */
- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-
- return 0;
-}
-
-static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
-{
- u8 lat;
-
- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- return;
-
- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
- if (pcibios_enable_device(dev, ~0) < 0) {
- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
- return;
- }
-
- /* Enable PCI bridge BAR1 prefetch and burst */
- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-
- /* Make sure our latency is high enough to handle the devices behind us */
- lat = 168;
- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
- pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return ssb_mips_irq(extpci_core->dev) + 2;
-}
-
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
unsigned int bus, unsigned int dev,
unsigned int func, unsigned int off)
@@ -320,6 +248,95 @@ static struct pci_controller ssb_pcicore
.mem_offset = 0x24000000,
};
+static u32 ssb_pcicore_pcibus_iobase = 0x100;
+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+
+/* This function is called when doing a pci_enable_device().
+ * We must first check if the device is a device on the PCI-core bridge. */
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+ struct resource *res;
+ int pos, size;
+ u32 *base;
+
+ if (d->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return -ENODEV;
+ }
+
+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ pci_name(d));
+
+ /* Fix up resource bases */
+ for (pos = 0; pos < 6; pos++) {
+ res = &d->resource[pos];
+ if (res->flags & IORESOURCE_IO)
+ base = &ssb_pcicore_pcibus_iobase;
+ else
+ base = &ssb_pcicore_pcibus_membase;
+ res->flags |= IORESOURCE_PCI_FIXED;
+ if (res->end) {
+ size = res->end - res->start + 1;
+ if (*base & (size - 1))
+ *base = (*base + size) & ~(size - 1);
+ res->start = *base;
+ res->end = res->start + size - 1;
+ *base += size;
+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+ }
+ /* Fix up PCI bridge BAR0 only */
+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+ break;
+ }
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+
+ return 0;
+}
+
+/* Early PCI fixup for a device on the PCI-core bridge. */
+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
+{
+ u8 lat;
+
+ if (dev->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return;
+ }
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+ /* Enable PCI bridge BAR1 prefetch and burst */
+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+
+/* PCI device IRQ mapping. */
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (dev->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return -ENODEV;
+ }
+ return ssb_mips_irq(extpci_core->dev) + 2;
+}
+
static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -10,6 +10,9 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/ssb/ssb_driver_pci.h>
+#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/pci.h>
#include "ssb_private.h"
@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
return res;
}
EXPORT_SYMBOL(ssb_gpio_polarity);
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
+{
+ struct pci_dev *pdev = (struct pci_dev *)data;
+ struct ssb_device *dev;
+ unsigned int i;
+ int res;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
+ continue;
+ if (!dev->dev ||
+ !dev->dev->driver ||
+ !device_is_registered(dev->dev))
+ continue;
+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
+ if (res >= 0)
+ return res;
+ }
+
+ return -ENODEV;
+}
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ int err;
+
+ err = ssb_pcicore_plat_dev_init(dev);
+ if (!err)
+ return 0;
+#ifdef CONFIG_SSB_DRIVER_GIGE
+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
+ if (err >= 0)
+ return err;
+#endif
+ /* This is not a PCI device on any SSB device. */
+
+ return -ENODEV;
+}
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
+{
+ const struct pci_dev *pdev = (const struct pci_dev *)data;
+ struct ssb_device *dev;
+ unsigned int i;
+ int res;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
+ continue;
+ if (!dev->dev ||
+ !dev->dev->driver ||
+ !device_is_registered(dev->dev))
+ continue;
+ res = ssb_gige_map_irq(dev, pdev);
+ if (res >= 0)
+ return res;
+ }
+
+ return -ENODEV;
+}
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int res;
+
+ /* Check if this PCI device is a device on a SSB bus or device
+ * and return the IRQ number for it. */
+
+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
+ if (res >= 0)
+ return res;
+#ifdef CONFIG_SSB_DRIVER_GIGE
+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
+ if (res >= 0)
+ return res;
+#endif
+ /* This is not a PCI device on any SSB device. */
+
+ return -ENODEV;
+}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -426,5 +426,12 @@ extern int ssb_bus_powerup(struct ssb_bu
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
--- a/include/linux/ssb/ssb_driver_pci.h
+++ b/include/linux/ssb/ssb_driver_pci.h
@@ -1,6 +1,11 @@
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
+#include <linux/types.h>
+
+struct pci_dev;
+
+
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
#else /* CONFIG_SSB_DRIVER_PCICORE */
@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struc
return 0;
}
+static inline
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+ return -ENODEV;
+}
+static inline
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return -ENODEV;
+}
+
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
@@ -68,6 +69,25 @@ found:
}
#endif /* CONFIG_SSB_PCIHOST */
+int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data))
+{
+ struct ssb_bus *bus;
+ int res;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ res = func(bus, data);
+ if (res >= 0) {
+ ssb_buses_unlock();
+ return res;
+ }
+ }
+ ssb_buses_unlock();
+
+ return -ENODEV;
+}
+
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
if (dev)
@@ -1181,7 +1201,14 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
- "initialization failed");
+ "initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+ "driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
@@ -1195,6 +1222,7 @@ fs_initcall(ssb_modinit);
static void __exit ssb_modexit(void)
{
+ ssb_gige_exit();
b43_pci_ssb_bridge_exit();
bus_unregister(&ssb_bustype);
}
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty
extern int ssb_devices_freeze(struct ssb_bus *bus);
extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data));
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -38,6 +38,7 @@
#include <linux/workqueue.h>
#include <linux/prefetch.h>
#include <linux/dma-mapping.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <net/checksum.h>
#include <net/ip.h>
@@ -425,8 +426,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
tp->read32_mbox(tp, off);
}
@@ -706,7 +708,7 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
{
u32 frame_val;
unsigned int loops;
@@ -720,7 +722,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -755,7 +757,12 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+{
+ return __tg3_readphy(tp, PHY_ADDR, reg, val);
+}
+
+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
{
u32 frame_val;
unsigned int loops;
@@ -771,7 +778,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -804,6 +811,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+{
+ return __tg3_writephy(tp, PHY_ADDR, reg, val);
+}
+
static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
{
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
@@ -2250,6 +2262,14 @@ static int tg3_setup_copper_phy(struct t
}
}
+ if (tp->tg3_flags & TG3_FLG3_ROBOSWITCH) {
+ current_link_up = 1;
+ current_speed = SPEED_1000; //FIXME
+ current_duplex = DUPLEX_FULL;
+ tp->link_config.active_speed = current_speed;
+ tp->link_config.active_duplex = current_duplex;
+ }
+
if (current_link_up == 1 &&
tp->link_config.active_duplex == DUPLEX_FULL)
tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
@@ -5197,6 +5217,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
@@ -5435,6 +5460,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* BCM4785: In order to avoid repercussions from using potentially
+ * defective internal ROM, stop the Rx RISC CPU, which is not
+ * required. */
+ tg3_stop_fw(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ }
+
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -5704,9 +5737,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
- /* Clear firmware's nvram arbitration. */
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
+ /* Clear firmware's nvram arbitration. */
+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ }
+
return 0;
}
@@ -5787,6 +5823,11 @@ static int tg3_load_5701_a0_firmware_fix
struct fw_info info;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
info.text_base = TG3_FW_TEXT_ADDR;
info.text_len = TG3_FW_TEXT_LEN;
info.text_data = &tg3FwText[0];
@@ -6345,6 +6386,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
return 0;
@@ -7306,6 +7352,11 @@ static void tg3_timer(unsigned long __op
spin_lock(&tp->lock);
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ /* BCM4785: Flush posted writes from GbE to host memory. */
+ tr32(HOSTCC_MODE);
+ }
+
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -8906,6 +8957,11 @@ static int tg3_test_nvram(struct tg3 *tp
__le32 *buf;
int i, j, k, err = 0, size;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't have NVRAM. */
+ return 0;
+ }
+
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
return -EIO;
@@ -9689,7 +9745,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -9708,7 +9764,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
spin_unlock_bh(&tp->lock);
return err;
@@ -10177,6 +10233,12 @@ static void __devinit tg3_get_5906_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
+ return;
+ }
+
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -10317,6 +10379,9 @@ static int tg3_nvram_read(struct tg3 *tp
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
@@ -10563,6 +10628,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -11610,7 +11678,6 @@ static int __devinit tg3_get_invariants(
tp->write32 = tg3_write_flush_reg32;
}
-
if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
@@ -11646,6 +11713,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ tp->write32_tx_mbox = tg3_write_flush_reg32;
+ tp->write32_rx_mbox = tg3_write_flush_reg32;
+ }
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -12017,6 +12089,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ }
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -12508,6 +12584,7 @@ static char * __devinit tg3_phy_string(s
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
+ case PHY_ID_BCM5750_2: return "5750-2";
case PHY_ID_BCM5752: return "5752";
case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
@@ -12695,6 +12772,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ if (pdev_is_ssb_gige_core(pdev)) {
+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
+ if (ssb_gige_must_flush_posted_writes(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
+ if (ssb_gige_have_roboswitch(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
+ }
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2477,6 +2477,9 @@ struct tg3 {
#define TG3_FLG3_ENABLE_APE 0x00000002
#define TG3_FLG3_5761_5784_AX_FIXES 0x00000004
#define TG3_FLG3_5701_DMA_BUG 0x00000008
+#define TG3_FLG3_IS_SSB_CORE 0x00000010
+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000020
+#define TG3_FLG3_ROBOSWITCH 0x00000040
struct timer_list timer;
u16 timer_counter;
@@ -2532,6 +2535,7 @@ struct tg3 {
#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM5755 0xbc050cc0
+#define PHY_ID_BCM5750_2 0xbc050cd0
#define PHY_ID_BCM5787 0xbc050ce0
#define PHY_ID_BCM5756 0xbc050ed0
#define PHY_ID_BCM5784 0xbc050fa0
@@ -2568,7 +2572,7 @@ struct tg3 {
(X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
(X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
(X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
- (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -212,6 +212,7 @@ void ssb_mipscore_init(struct ssb_mipsco
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
+ case SSB_DEV_ETHERNET_GBIT:
case SSB_DEV_80211:
case SSB_DEV_USB20_HOST:
/* These devices get their own IRQ line if available, the rest goes on IRQ0 */