You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option...

105 lines
3.4 KiB

From a4be9046c3a3fc39a06089553df8cc19a2abd814 Mon Sep 17 00:00:00 2001
From: Priyanka Jain <Priyanka.Jain@freescale.com>
Date: Tue, 3 Nov 2015 11:25:24 +0530
Subject: [PATCH 233/238] i2c: pca954x: Add option to skip disabling PCA954x
Mux device
On some Layerscape boards like LS2085ARDB/LS2080ARDB,
input pull-up resistors on PCA954x Mux device are
missing on board. So, if mux are disabled after powered-on,
input lines will float leading to incorrect functionality.
Hence, PCA954x Mux device should never be turned-off after
power-on.
Add option to skip disabling PCA954x Mux device
if device tree contians "i2c-mux-never-disable" property
for pca954x device node.
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
---
drivers/i2c/muxes/i2c-mux-pca954x.c | 38 +++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -63,6 +63,7 @@ struct pca954x {
struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
u8 last_chan; /* last register value */
+ u8 disable_mux; /* do not disable mux if val not 0 */
};
struct chip_desc {
@@ -174,6 +175,13 @@ static int pca954x_deselect_mux(struct i
{
struct pca954x *data = i2c_get_clientdata(client);
+#ifdef CONFIG_ARCH_LAYERSCAPE
+ if (data->disable_mux != 0)
+ data->last_chan = chips[data->type].nchans;
+ else
+ data->last_chan = 0;
+ return pca954x_reg_write(adap, client, data->disable_mux);
+#endif
/* Deselect active channel */
data->last_chan = 0;
return pca954x_reg_write(adap, client, data->last_chan);
@@ -201,6 +209,23 @@ static int pca954x_probe(struct i2c_clie
if (!data)
return -ENOMEM;
+#ifdef CONFIG_ARCH_LAYERSCAPE
+ /* The point here is that you must not disable a mux if there
+ * are no pullups on the input or you mess up the I2C. This
+ * needs to be put into the DTS really as the kernel cannot
+ * know this otherwise.
+ */
+ data->type = id->driver_data;
+ data->disable_mux = of_node &&
+ of_property_read_bool(of_node, "i2c-mux-never-disable") &&
+ chips[data->type].muxtype == pca954x_ismux ?
+ chips[data->type].enable : 0;
+ /* force the first selection */
+ if (data->disable_mux != 0)
+ data->last_chan = chips[data->type].nchans;
+ else
+ data->last_chan = 0;
+#endif
i2c_set_clientdata(client, data);
/* Get the mux out of reset if a reset GPIO is specified. */
@@ -212,13 +237,19 @@ static int pca954x_probe(struct i2c_clie
* that the mux is in fact present. This also
* initializes the mux to disconnected state.
*/
+#ifdef CONFIG_ARCH_LAYERSCAPE
+ if (i2c_smbus_write_byte(client, data->disable_mux) < 0) {
+#else
if (i2c_smbus_write_byte(client, 0) < 0) {
+#endif
dev_warn(&client->dev, "probe failed\n");
return -ENODEV;
}
+#ifndef CONFIG_ARCH_LAYERSCAPE
data->type = id->driver_data;
data->last_chan = 0; /* force the first selection */
+#endif
idle_disconnect_dt = of_node &&
of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
@@ -289,6 +320,13 @@ static int pca954x_resume(struct device
struct i2c_client *client = to_i2c_client(dev);
struct pca954x *data = i2c_get_clientdata(client);
+#ifdef CONFIG_ARCH_LAYERSCAPE
+ if (data->disable_mux != 0)
+ data->last_chan = chips[data->type].nchans;
+ else
+ data->last_chan = 0;
+ return i2c_smbus_write_byte(client, data->disable_mux);
+#endif
data->last_chan = 0;
return i2c_smbus_write_byte(client, 0);
}