You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/at91/patches/800-netus-support.patch

54 lines
1.7 KiB

--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -354,6 +354,13 @@ config MACH_CPU9G20
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
+config MACH_NETUS_FOXBOARD
+ bool "Acmesystems NetusG20 board"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Acmesystems NetusG20
+ board <http://netus.acmesystems.it/>
+
endif
# ----------------------------------------------------------
@@ -444,6 +451,26 @@
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
+config NETUS_HEARTBEAT_LED
+ bool "Use heartbeat trigger for led"
+ depends on MACH_NETUS_FOXBOARD
+ help
+ Select this option to enable default trigger heartbeart for
+ FoxBoardG20 red led.
+
+config NETUS_SERIALS
+ bool "Enable serials"
+ depends on MACH_NETUS_FOXBOARD
+ help
+ Select this option to enable serials interface /dev/ttyS1,
+ /dev/ttyS2 and /dev/ttyS5 (for oLed interface)
+
+config NETUS_USE_DATAFLASH
+ bool "Enable the dataflash"
+ depends on MACH_NETUS_FOXBOARD
+ help
+ Select this option to use the dataflash.
+
# ----------------------------------------------------------
comment "AT91 Feature Selections"
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
+obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o