You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts

217 lines
3.5 KiB

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "iodata,wn-ag300dgr", "qca,ar9344";
model = "I-O DATA WN-AG300DGR";
aliases {
led-boot = &router;
led-failsafe = &router;
led-running = &router;
led-upgrade = &router;
};
leds {
compatible = "gpio-leds";
router: router {
label = "wn-ag300dgr:green:router";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
children {
label = "wn-ag300dgr:green:children";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
eco {
label = "wn-ag300dgr:green:eco";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
notification {
label = "wn-ag300dgr:amber:notification";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "wn-ag300dgr:green:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "wn-ag300dgr:green:wlan5g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
eco {
label = "eco";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
router {
label = "router";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
auto {
label = "auto";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
children {
label = "children";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x040000 0xf10000>;
};
partition@f50000 {
label = "manufacture";
reg = <0xf50000 0x40000>;
read-only;
};
partition@f90000 {
label = "backup";
reg = <0xf90000 0x10000>;
read-only;
};
partition@fa0000 {
label = "storage";
reg = <0xfa0000 0x50000>;
read-only;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07a00000 /* PORT0 PAD MODE CTRL */
0x7c 0x000000fe /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x06000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};