freifunkist-firmware

hsist

History

David Bauer abe137ff5e ramips: add support for ASUS RT-AC57U SoC: MediaTek MT7621AT RAM: 128M (Winbond W631GG6KB-15) FLASH: 16MB (Spansion S25FL128SA) WiFi: MediaTek MT7603EN bgn 2SS WiFi: MediaTek MT7612EN nac 2SS BTN: Reset - WPS LED: - Power - LAN {1-4} - WAN - WiFi 2.4 GHz - WiFi 5 GHz - USB UART: UART is present next to the Power LED. TX - RX - GND - 3V3 / 57600-8N1 3V3 is the nearest one to the Power LED. Installation ------------ Via TFTP: 1. Set your computers IP-Address to 192.168.1.75. 2. Power up the Router with the Reset button pressed. 3. Release the Reset button after 5 seconds. 4. Upload OpenWRT sysupgrade image via TFTP: > tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE> Via SSH: Note: User/password for SSH is identical with the one used in the Web-interface. 1. Complete the initial setup wizard. 2. Activate SSH under "Administration" -> "System". 3. Transfer the OpenWrt sysupgrade image via scp: > scp owrt.bin admin@192.168.1.1:/tmp 4. Connect via SSH to the router. > ssh admin@192.168.1.1 5. Write the OpenWrt image to flash. > mtd-write -i /tmp/owrt.bin -d linux 6. Reboot the router > reboot Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 14e0e4f138e35c3e2a15cc3a836c939547ee053b)		5 years ago
..
base-files	ramips: add support for ASUS RT-AC57U	5 years ago
dts	ramips: add support for ASUS RT-AC57U	5 years ago
files-4.14/drivers	ramips: ethernet: remove unused SIOCETHTOOL ioctl handling	6 years ago
image	ramips: add support for ASUS RT-AC57U	5 years ago
mt76x8	ramips: enable R6120 USB power	6 years ago
mt7620	ramips: Add support for Head Weblink HDRM200	6 years ago
mt7621	ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE	6 years ago
patches-4.14	kernel: bump 4.14 to 4.14.128	5 years ago
rt288x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	6 years ago
rt305x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	6 years ago
rt3883	ramips: rt3883: drop jimage support	6 years ago
Makefile	…
modules.mk	kernel: Fix kmod-regmap split	6 years ago