freifunkist-firmware

hsist

History

Robert Marko 443abb8ccd ar71xx: add support for Mikrotik RB750P-PBr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 4 PoE out) - Outdoor use ready This ethernet router is based on the same platform as the hEX PoE lite. Installation 1. login to the Mikrotik WebUI to backup your licence keys 2. setup a DHCP/BOOTP Server with: * DHCP-Option 66 (TFTP server name) pointing to a local TFTP Server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. connect the port labled internet to your local network 4. keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP Server. Login as root/without password to the started LEDE via ssh listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: * rbcfg set boot_protocol bootp * rbcfg set boot_device ethnand * rbcfg apply Open Netinstall and reboot routerboard. Now netinstall sees routerboard and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall Signed-off-by: Robert Marko <robimarko@gmail.com>		7 years ago
..
base-files	ar71xx: add support for Mikrotik RB750P-PBr2	7 years ago
files	ar71xx: add support for Mikrotik RB750P-PBr2	7 years ago
generic	…
image	ar71xx: add support for Mikrotik RB750P-PBr2	7 years ago
mikrotik	ar71xx: Add kernel 4.9 support	7 years ago
nand	ar71xx: Add kernel 4.9 support	7 years ago
patches-4.4	…
patches-4.9	ar71xx: Add kernel 4.9 support	7 years ago
Makefile	…
config-4.4	…
config-4.9	ar71xx: Add kernel 4.9 support	7 years ago
modules.mk	…