You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
158 lines
6.3 KiB
158 lines
6.3 KiB
From fb9e4932d17ad32786d03cb672fb62f2b337acf5 Mon Sep 17 00:00:00 2001
|
|
From: Jon Mason <jonmason@broadcom.com>
|
|
Date: Thu, 15 Oct 2015 15:48:29 -0400
|
|
Subject: [PATCH 48/50] clk: iproc: Split off dig_filter
|
|
|
|
The PLL loop filter/gain can be located in a separate register on some
|
|
SoCs. Split these off into a separate variable, so that an offset can
|
|
be added if necessary. Also, make the necessary modifications to the
|
|
Cygnus and NSP drivers for this change.
|
|
|
|
Signed-off-by: Jon Mason <jonmason@broadcom.com>
|
|
---
|
|
drivers/clk/bcm/clk-cygnus.c | 17 +++++++++++------
|
|
drivers/clk/bcm/clk-iproc-pll.c | 14 +++++++++-----
|
|
drivers/clk/bcm/clk-iproc.h | 10 +++++++++-
|
|
drivers/clk/bcm/clk-nsp.c | 14 +++++++++-----
|
|
4 files changed, 38 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/clk/bcm/clk-cygnus.c
|
|
+++ b/drivers/clk/bcm/clk-cygnus.c
|
|
@@ -34,9 +34,11 @@
|
|
{ .offset = o, .en_shift = es, .high_shift = hs, \
|
|
.high_width = hw, .low_shift = ls, .low_width = lw }
|
|
|
|
-#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
|
|
- .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
|
|
- .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
|
|
+ .p_reset_shift = prs }
|
|
+
|
|
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
|
|
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
.ka_width = kaw }
|
|
|
|
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
|
|
@@ -56,7 +58,8 @@ static const struct iproc_pll_ctrl genpl
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 1, 0),
|
|
- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
|
|
+ .reset = RESET_VAL(0x0, 11, 10),
|
|
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
|
|
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
@@ -114,7 +117,8 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygn
|
|
static const struct iproc_pll_ctrl lcpll0 = {
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 5, 4),
|
|
- .reset = RESET_VAL(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
|
|
+ .reset = RESET_VAL(0x0, 31, 30),
|
|
+ .dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
|
|
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
|
|
.ndiv_int = REG_VAL(0x4, 16, 10),
|
|
.pdiv = REG_VAL(0x4, 26, 4),
|
|
@@ -191,7 +195,8 @@ static const struct iproc_pll_ctrl mipip
|
|
IPROC_CLK_NEEDS_READ_BACK,
|
|
.aon = AON_VAL(0x0, 4, 17, 16),
|
|
.asiu = ASIU_GATE_VAL(0x0, 3),
|
|
- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
|
|
+ .reset = RESET_VAL(0x0, 11, 10),
|
|
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
.pdiv = REG_VAL(0x14, 0, 4),
|
|
--- a/drivers/clk/bcm/clk-iproc-pll.c
|
|
+++ b/drivers/clk/bcm/clk-iproc-pll.c
|
|
@@ -224,13 +224,17 @@ static void __pll_bring_out_reset(struct
|
|
u32 val;
|
|
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
|
|
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
|
|
+ const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
|
|
+
|
|
+ val = readl(pll->pll_base + dig_filter->offset);
|
|
+ val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
|
|
+ bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
|
|
+ bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
|
|
+ val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
|
|
+ ka << dig_filter->ka_shift;
|
|
+ iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
|
|
|
|
val = readl(pll->pll_base + reset->offset);
|
|
- val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
|
|
- bit_mask(reset->kp_width) << reset->kp_shift |
|
|
- bit_mask(reset->ka_width) << reset->ka_shift);
|
|
- val |= ki << reset->ki_shift | kp << reset->kp_shift |
|
|
- ka << reset->ka_shift;
|
|
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
|
|
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
|
|
}
|
|
--- a/drivers/clk/bcm/clk-iproc.h
|
|
+++ b/drivers/clk/bcm/clk-iproc.h
|
|
@@ -94,12 +94,19 @@ struct iproc_pll_aon_pwr_ctrl {
|
|
};
|
|
|
|
/*
|
|
- * Control of the PLL reset, with Ki, Kp, and Ka parameters
|
|
+ * Control of the PLL reset
|
|
*/
|
|
struct iproc_pll_reset_ctrl {
|
|
unsigned int offset;
|
|
unsigned int reset_shift;
|
|
unsigned int p_reset_shift;
|
|
+};
|
|
+
|
|
+/*
|
|
+ * Control of the Ki, Kp, and Ka parameters
|
|
+ */
|
|
+struct iproc_pll_dig_filter_ctrl {
|
|
+ unsigned int offset;
|
|
unsigned int ki_shift;
|
|
unsigned int ki_width;
|
|
unsigned int kp_shift;
|
|
@@ -129,6 +136,7 @@ struct iproc_pll_ctrl {
|
|
struct iproc_pll_aon_pwr_ctrl aon;
|
|
struct iproc_asiu_gate asiu;
|
|
struct iproc_pll_reset_ctrl reset;
|
|
+ struct iproc_pll_dig_filter_ctrl dig_filter;
|
|
struct iproc_pll_sw_ctrl sw_ctrl;
|
|
struct iproc_clk_reg_op ndiv_int;
|
|
struct iproc_clk_reg_op ndiv_frac;
|
|
--- a/drivers/clk/bcm/clk-nsp.c
|
|
+++ b/drivers/clk/bcm/clk-nsp.c
|
|
@@ -26,9 +26,11 @@
|
|
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
|
|
.pwr_shift = ps, .iso_shift = is }
|
|
|
|
-#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
|
|
- .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
|
|
- .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
|
|
+ .p_reset_shift = prs }
|
|
+
|
|
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
|
|
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
.ka_width = kaw }
|
|
|
|
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
|
|
@@ -43,7 +45,8 @@ CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-arm
|
|
static const struct iproc_pll_ctrl genpll = {
|
|
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
|
|
.aon = AON_VAL(0x0, 1, 12, 0),
|
|
- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
|
|
+ .reset = RESET_VAL(0x0, 11, 10),
|
|
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
|
|
.ndiv_int = REG_VAL(0x14, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x14, 0, 20),
|
|
.pdiv = REG_VAL(0x18, 24, 3),
|
|
@@ -99,7 +102,8 @@ CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp
|
|
static const struct iproc_pll_ctrl lcpll0 = {
|
|
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
|
|
.aon = AON_VAL(0x0, 1, 24, 0),
|
|
- .reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
|
|
+ .reset = RESET_VAL(0x0, 23, 22),
|
|
+ .dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
|
|
.ndiv_int = REG_VAL(0x4, 20, 8),
|
|
.ndiv_frac = REG_VAL(0x4, 0, 20),
|
|
.pdiv = REG_VAL(0x4, 28, 3),
|
|
|