You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/ipq806x/patches/0127-clk-qcom-Add-support-f...

148 lines
3.5 KiB

From fd06a2cc719296f65a280cb1533b125f63cfcb34 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Mon, 28 Apr 2014 15:58:11 -0700
Subject: [PATCH 127/182] clk: qcom: Add support for setting rates on PLLs
Some PLLs may require changing their rate at runtime. Add support
for these PLLs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/clk-pll.c | 68 +++++++++++++++++++++++++++++++++++++++++++-
drivers/clk/qcom/clk-pll.h | 20 +++++++++++++
2 files changed, 87 insertions(+), 1 deletion(-)
--- a/drivers/clk/qcom/clk-pll.c
+++ b/drivers/clk/qcom/clk-pll.c
@@ -97,7 +97,7 @@ static unsigned long
clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
- u32 l, m, n;
+ u32 l, m, n, config;
unsigned long rate;
u64 tmp;
@@ -116,13 +116,79 @@ clk_pll_recalc_rate(struct clk_hw *hw, u
do_div(tmp, n);
rate += tmp;
}
+ if (pll->post_div_width) {
+ regmap_read(pll->clkr.regmap, pll->config_reg, &config);
+ config >>= pll->post_div_shift;
+ config &= BIT(pll->post_div_width) - 1;
+ rate /= config + 1;
+ }
+
return rate;
}
+static const
+struct pll_freq_tbl *find_freq(const struct pll_freq_tbl *f, unsigned long rate)
+{
+ if (!f)
+ return NULL;
+
+ for (; f->freq; f++)
+ if (rate <= f->freq)
+ return f;
+
+ return NULL;
+}
+
+static long
+clk_pll_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *p_rate, struct clk **p)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ const struct pll_freq_tbl *f;
+
+ f = find_freq(pll->freq_tbl, rate);
+ if (!f)
+ return clk_pll_recalc_rate(hw, *p_rate);
+
+ return f->freq;
+}
+
+static int
+clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ const struct pll_freq_tbl *f;
+ bool enabled;
+ u32 mode;
+ u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N;
+
+ f = find_freq(pll->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+ regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
+ enabled = (mode & enable_mask) == enable_mask;
+
+ if (enabled)
+ clk_pll_disable(hw);
+
+ regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l);
+ regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m);
+ regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n);
+ regmap_write(pll->clkr.regmap, pll->config_reg, f->ibits);
+
+ if (enabled)
+ clk_pll_enable(hw);
+
+ return 0;
+}
+
const struct clk_ops clk_pll_ops = {
.enable = clk_pll_enable,
.disable = clk_pll_disable,
.recalc_rate = clk_pll_recalc_rate,
+ .determine_rate = clk_pll_determine_rate,
+ .set_rate = clk_pll_set_rate,
};
EXPORT_SYMBOL_GPL(clk_pll_ops);
--- a/drivers/clk/qcom/clk-pll.h
+++ b/drivers/clk/qcom/clk-pll.h
@@ -18,6 +18,21 @@
#include "clk-regmap.h"
/**
+ * struct pll_freq_tbl - PLL frequency table
+ * @l: L value
+ * @m: M value
+ * @n: N value
+ * @ibits: internal values
+ */
+struct pll_freq_tbl {
+ unsigned long freq;
+ u16 l;
+ u16 m;
+ u16 n;
+ u32 ibits;
+};
+
+/**
* struct clk_pll - phase locked loop (PLL)
* @l_reg: L register
* @m_reg: M register
@@ -26,6 +41,7 @@
* @mode_reg: mode register
* @status_reg: status register
* @status_bit: ANDed with @status_reg to determine if PLL is enabled
+ * @freq_tbl: PLL frequency table
* @hw: handle between common and hardware-specific interfaces
*/
struct clk_pll {
@@ -36,6 +52,10 @@ struct clk_pll {
u32 mode_reg;
u32 status_reg;
u8 status_bit;
+ u8 post_div_width;
+ u8 post_div_shift;
+
+ const struct pll_freq_tbl *freq_tbl;
struct clk_regmap clkr;
};