You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/ath79/dts/ar9341_pcs_cr3000.dts

171 lines
2.7 KiB

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "PowerCloud Systems CR3000";
compatible = "pcs,cr3000", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
status: power {
label = "pcs:amber:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "pcs:blue:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wan {
label = "pcs:blue:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan1 {
label = "pcs:blue:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan2 {
label = "pcs:blue:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan3 {
label = "pcs:blue:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan4 {
label = "pcs:blue:lan4";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x07a0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
phy-mode = "gmii";
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};