You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Florian Fainelli d504b6251c more convertions to {read,write}_relaxed I/O accessors 12 years ago
docs
include version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists 12 years ago
package netifd: update to latest version, should fix clearing ipv6 routes on interface bringup (#12184) 12 years ago
scripts AR71xx/9xxx based routers are the most common these days, select that as the default target 12 years ago
target more convertions to {read,write}_relaxed I/O accessors 12 years ago
toolchain build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems 12 years ago
tools cmake: update to version 2.8.9 12 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 13 years ago
.gitignore
BSDmakefile
Config.in build: turn on package parallel builds by default and fix descriptions. 12 years ago
LICENSE
Makefile abort built in prereq target if there is no site config file for the current target 13 years ago
README trying to make README file a bit more helpful 13 years ago
feeds.conf.default Add xorg feed to feeds.conf.default 13 years ago
rules.mk rules.mk: add TARGET_AR and TARGET_RANLIB 12 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
Your OpenWrt Project
http://openwrt.org