You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
126 lines
4.1 KiB
126 lines
4.1 KiB
From c5adc0fa63a930e3313c74bb7c1d4d158130eb41 Mon Sep 17 00:00:00 2001
|
|
From: Abhishek Sahu <absahu@codeaurora.org>
|
|
Date: Mon, 12 Mar 2018 18:44:54 +0530
|
|
Subject: [PATCH 05/13] i2c: qup: schedule EOT and FLUSH tags at the end of
|
|
transfer
|
|
|
|
The role of FLUSH and EOT tag is to flush already scheduled
|
|
descriptors in BAM HW in case of error. EOT is required only
|
|
when descriptors are scheduled in RX FIFO. If all the messages
|
|
are WRITE, then only FLUSH tag will be used.
|
|
|
|
A single BAM transfer can have multiple read and write messages.
|
|
The EOT and FLUSH tags should be scheduled at the end of BAM HW
|
|
descriptors. Since the READ and WRITE can be present in any order
|
|
so for some of the cases, these tags are not being written
|
|
correctly.
|
|
|
|
Following is one of the example
|
|
|
|
READ, READ, READ, READ
|
|
|
|
Currently EOT and FLUSH tags are being written after each READ.
|
|
If QUP gets NACK for first READ itself, then flush will be
|
|
triggered. It will look for first FLUSH tag in TX FIFO and will
|
|
stop there so only descriptors for first READ descriptors be
|
|
flushed. All the scheduled descriptors should be cleared to
|
|
generate BAM DMA completion.
|
|
|
|
Now this patch is scheduling FLUSH and EOT only once after all the
|
|
descriptors. So, flush will clear all the scheduled descriptors and
|
|
BAM will generate the completion interrupt.
|
|
|
|
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
|
|
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
|
|
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
---
|
|
drivers/i2c/busses/i2c-qup.c | 39 ++++++++++++++++++++++--------------
|
|
1 file changed, 24 insertions(+), 15 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-qup.c
|
|
+++ b/drivers/i2c/busses/i2c-qup.c
|
|
@@ -551,7 +551,7 @@ static int qup_i2c_set_tags_smb(u16 addr
|
|
}
|
|
|
|
static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
|
|
- struct i2c_msg *msg, int is_dma)
|
|
+ struct i2c_msg *msg)
|
|
{
|
|
u16 addr = i2c_8bit_addr_from_msg(msg);
|
|
int len = 0;
|
|
@@ -592,11 +592,6 @@ static int qup_i2c_set_tags(u8 *tags, st
|
|
else
|
|
tags[len++] = data_len;
|
|
|
|
- if ((msg->flags & I2C_M_RD) && last && is_dma) {
|
|
- tags[len++] = QUP_BAM_INPUT_EOT;
|
|
- tags[len++] = QUP_BAM_FLUSH_STOP;
|
|
- }
|
|
-
|
|
return len;
|
|
}
|
|
|
|
@@ -605,7 +600,7 @@ static int qup_i2c_issue_xfer_v2(struct
|
|
int data_len = 0, tag_len, index;
|
|
int ret;
|
|
|
|
- tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
|
|
+ tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg);
|
|
index = msg->len - qup->blk.data_len;
|
|
|
|
/* only tags are written for read */
|
|
@@ -701,7 +696,7 @@ static int qup_i2c_bam_do_xfer(struct qu
|
|
while (qup->blk.pos < blocks) {
|
|
tlen = (i == (blocks - 1)) ? rem : limit;
|
|
tags = &qup->start_tag.start[off + len];
|
|
- len += qup_i2c_set_tags(tags, qup, msg, 1);
|
|
+ len += qup_i2c_set_tags(tags, qup, msg);
|
|
qup->blk.data_len -= tlen;
|
|
|
|
/* scratch buf to read the start and len tags */
|
|
@@ -729,17 +724,11 @@ static int qup_i2c_bam_do_xfer(struct qu
|
|
return ret;
|
|
|
|
off += len;
|
|
- /* scratch buf to read the BAM EOT and FLUSH tags */
|
|
- ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
|
|
- &qup->brx.tag.start[0],
|
|
- 2, qup, DMA_FROM_DEVICE);
|
|
- if (ret)
|
|
- return ret;
|
|
} else {
|
|
while (qup->blk.pos < blocks) {
|
|
tlen = (i == (blocks - 1)) ? rem : limit;
|
|
tags = &qup->start_tag.start[off + tx_len];
|
|
- len = qup_i2c_set_tags(tags, qup, msg, 1);
|
|
+ len = qup_i2c_set_tags(tags, qup, msg);
|
|
qup->blk.data_len -= tlen;
|
|
|
|
ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
|
|
@@ -779,6 +768,26 @@ static int qup_i2c_bam_do_xfer(struct qu
|
|
msg++;
|
|
}
|
|
|
|
+ /* schedule the EOT and FLUSH I2C tags */
|
|
+ len = 1;
|
|
+ if (rx_cnt) {
|
|
+ qup->btx.tag.start[0] = QUP_BAM_INPUT_EOT;
|
|
+ len++;
|
|
+
|
|
+ /* scratch buf to read the BAM EOT and FLUSH tags */
|
|
+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
|
|
+ &qup->brx.tag.start[0],
|
|
+ 2, qup, DMA_FROM_DEVICE);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ qup->btx.tag.start[len - 1] = QUP_BAM_FLUSH_STOP;
|
|
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], &qup->btx.tag.start[0],
|
|
+ len, qup, DMA_TO_DEVICE);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_cnt,
|
|
DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_PREP_FENCE);
|
|
|