You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Gabor Juhos b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards ... This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910		13 years ago
..
base-files	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	13 years ago
files	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	13 years ago
image	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	13 years ago
patches-2.6.39	ramips: rt305x: add dwc_otg driver	13 years ago
rt288x	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board	13 years ago
rt305x	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	13 years ago
Makefile	ramips: fix package name of kmod-input-gpio-buttons	13 years ago
base-files.mk	ramips: remove default network configuration, and generate that from uci-defaults	13 years ago