You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Petr Štetiar 40530c8eb4 ath79: Add support for Ubiquiti Nanostation M (XW) ... CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 2x100 MBit (24V PoE in, 24V PoE out), AR8236 switch WLAN: 2.4/5 GHz UART: 1 UART LEDs: Power, 2x Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ath79-generic-ubnt-nano-m-xw-squashfs-factory.bin Tested-by: Joe Ayers <ae6xe@arrl.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>		6 years ago
..
adm5120	…
adm8668	…
apm821xx	apm821xx: speed up ath9k-caldata extraction	6 years ago
ar7	…
ar71xx	ar71xx: Change led trigger from usbdev to usbport	6 years ago
arc770	…
archs38	…
armvirt	armvirt: 32: enable CONFIG_ARM_LPAE	6 years ago
at91	…
ath25	…
ath79	ath79: Add support for Ubiquiti Nanostation M (XW)	6 years ago
au1000	…
bcm53xx	…
brcm47xx	…
brcm63xx	brcm63xx: dts: Unify naming of gpio-led nodes	6 years ago
brcm2708	kernel: add kmod-input-touchscreen-ads7846	6 years ago
cns3xxx	kernel: bump 4.19 to 4.19.21	6 years ago
gemini	gemini: Generate harddisk image for DNS-313	6 years ago
generic	x86: fix geode image builds redux	6 years ago
imx6	kernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14	6 years ago
ipq40xx	ipq40xx: add support for FritzBox 7530	6 years ago
ipq806x	ipq806x: fix LED configuration for NEC Aterm WG2600HP	6 years ago
ixp4xx	kernel: bump 4.9 to 4.9.160	6 years ago
kirkwood	kernel: bump 4.19 to 4.19.24	6 years ago
lantiq	…
layerscape	layerscape: fix VFIO driver build issue since linux-4.14.99	6 years ago
malta	…
mcs814x	…
mediatek	kernel: bump 4.14 to 4.14.99	6 years ago
mpc85xx	mpc85xx: Fix Aerohive HiveAP-330 initramfs image	6 years ago
mvebu	kernel: bump 4.14 to 4.14.98	6 years ago
mxs	…
octeon	…
octeontx	…
omap	…
omap24xx	…
orion	…
oxnas	oxnas: pcie: model shared resource as external pcie-phy driver	6 years ago
pistachio	…
ppc40x	…
ppc44x	…
ramips	ramips: add support for Belkin F9K1109v1	6 years ago
rb532	…
samsung	…
sunxi	sunxi: add support for Orange Pi One	6 years ago
uml	…
x86	x86: video: disable buildtin amdgpu DRM driver	6 years ago
xburst	…
zynq	…
Makefile	…