You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
91 lines
2.4 KiB
91 lines
2.4 KiB
From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001
|
|
From: Chen-Yu Tsai <wens@csie.org>
|
|
Date: Thu, 26 Dec 2013 17:14:33 +0800
|
|
Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS
|
|
|
|
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
|
|
part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO.
|
|
The IC also takes a 32.768 KHz low power clock input, and a power
|
|
enable signal via GPIO.
|
|
|
|
The WiFi module supports out-of-band interrupt signaling via GPIO,
|
|
but this is not supported in this patch.
|
|
---
|
|
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
|
|
1 file changed, 47 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
|
|
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
|
|
@@ -28,6 +28,23 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+ mmc3: mmc@01c12000 {
|
|
+ pinctrl-names = "default", "default";
|
|
+ pinctrl-0 = <&mmc3_pins_a>;
|
|
+ pinctrl-1 = <&wifi_host_wake_pin>;
|
|
+ vmmc-supply = <®_vmmc3>;
|
|
+ non-removable;
|
|
+ status = "okay";
|
|
+
|
|
+ brcmf: bcrmf@0 {
|
|
+ /* out of band interrupt not working */
|
|
+ /* compatible = "broadcom,bcm43362"; */
|
|
+ interrupt-parent = <&pio>;
|
|
+ interrupts = <10 2>; /* EINT10 */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
usbphy: phy@01c13400 {
|
|
usb1_vbus-supply = <®_usb1_vbus>;
|
|
usb2_vbus-supply = <®_usb2_vbus>;
|
|
@@ -56,6 +73,18 @@
|
|
};
|
|
|
|
pinctrl@01c20800 {
|
|
+ mmc3_pins_a: mmc3@0 {
|
|
+ /* AP6210 requires pull-up */
|
|
+ allwinner,pull = <1>;
|
|
+ };
|
|
+
|
|
+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
|
|
+ allwinner,pins = "PH9";
|
|
+ allwinner,function = "gpio_out";
|
|
+ allwinner,drive = <0>;
|
|
+ allwinner,pull = <0>;
|
|
+ };
|
|
+
|
|
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
|
|
allwinner,pins = "PH12";
|
|
allwinner,function = "gpio_out";
|
|
@@ -83,6 +112,13 @@
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <2>;
|
|
};
|
|
+
|
|
+ wifi_host_wake_pin: wifi_host_wake_pin@0 {
|
|
+ allwinner,pins = "PH10";
|
|
+ allwinner,function = "gpio_in";
|
|
+ allwinner,drive = <0>;
|
|
+ allwinner,pull = <0>;
|
|
+ };
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
@@ -171,4 +207,15 @@
|
|
reg_usb2_vbus: usb2-vbus {
|
|
status = "okay";
|
|
};
|
|
+
|
|
+ reg_vmmc3: vmmc3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&vmmc3_pin_cubietruck>;
|
|
+ regulator-name = "vmmc3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 7 9 0>;
|
|
+ };
|
|
};
|
|
|