You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

35 lines
1.3 KiB

config UBOOT_TARGET
string "target"
default "easy50712_DDR166M"
depends on PACKAGE_uboot-lantiq
help
The configuration reflects the settings for a dedicated board hardware.
Select for Danube evaluation board easy50712_DDR166M .
Select for AR9 evaluation board easy50812_DDR166M .
config UBOOT_RAMBOOT
bool "Enable RAM boot image"
depends on PACKAGE_uboot-lantiq
help
Using the UART boot mode of the ROM code this image could be loaded to the RAM.
While executing the image in the RAM the functionality of the uboot image can be
tested first without touching the original flash.
Note: Be carefull, by saving the environment the flash will be modified.
The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
config UBOOT_RAMBOOT_DDR_CONFIG
string "DDR configuration file"
default "easy50712_DDR166M.conf"
depends on UBOOT_RAMBOOT
help
The DDR configuration file should reflect the DDR memory device configuration .
It will be used to create a RAM boot image
Select for Danube evalution board easy50712_DDR166M.conf .
Select for AR9 evalution board easy50812.conf .
config UBOOT_A800
bool "add ARV452 Switch bringup hack"
depends on PACKAGE_uboot-lantiq
help
Say Y, if you have a arv452 board (wav-281, A800, ..)