You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

368 lines
9.6 KiB

/*
* drivers/usb/host/ehci-oxnas.c
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/mfd/syscon.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#define USBHSMPH_CTRL_REGOFFSET 0x40
#define USBHSMPH_STAT_REGOFFSET 0x44
#define REF300_DIV_REGOFFSET 0xF8
#define USBHSPHY_CTRL_REGOFFSET 0x84
#define USB_CTRL_REGOFFSET 0x90
#define PLLB_DIV_CTRL_REGOFFSET 0x1000F8
#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
#define USBHSPHY_ATE_ESET 14
#define USBHSPHY_TEST_DIN 6
#define USBHSPHY_TEST_ADD 2
#define USBHSPHY_TEST_DOUT_SEL 1
#define USBHSPHY_TEST_CLK 0
#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USBAMUX_DEVICE BIT(4)
#define USBPHY_REFCLKDIV_SHIFT 2
#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
#define USB_CTRL_USB_CKO_SEL_BIT 0
#define USB_INT_CLK_XTAL 0
#define USB_INT_CLK_REF300 2
#define USB_INT_CLK_PLLB 3
#define REF300_DIV_INT_SHIFT 8
#define REF300_DIV_FRAC_SHIFT 0
#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
#define PLLB_BYPASS 1
#define PLLB_ENSAT 3
#define PLLB_OUTDIV 4
#define PLLB_REFDIV 8
#define PLLB_DIV_INT_SHIFT 8
#define PLLB_DIV_FRAC_SHIFT 0
#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
#include "ehci.h"
struct oxnas_hcd {
struct clk *clk;
struct clk *refsrc;
struct clk *phyref;
int use_pllb;
int use_phya;
struct reset_control *rst_host;
struct reset_control *rst_phya;
struct reset_control *rst_phyb;
struct regmap *syscon;
};
#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller"
static struct hc_driver __read_mostly oxnas_hc_driver;
static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
{
if (oxnas->use_pllb) {
/* enable pllb */
clk_prepare_enable(oxnas->refsrc);
/* enable ref600 */
clk_prepare_enable(oxnas->phyref);
/* 600MHz pllb divider for 12MHz */
regmap_write_bits(oxnas->syscon, PLLB_DIV_CTRL_REGOFFSET, 0xffff, PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0));
} else {
/* ref 300 divider for 12MHz */
regmap_write_bits(oxnas->syscon, REF300_DIV_REGOFFSET, 0xffff, REF300_DIV_INT(25) | REF300_DIV_FRAC(0));
}
/* Ensure the USB block is properly reset */
reset_control_reset(oxnas->rst_host);
reset_control_reset(oxnas->rst_phya);
reset_control_reset(oxnas->rst_phyb);
/* Force the high speed clock to be generated all the time, via serial
programming of the USB HS PHY */
regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff,
(2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN));
regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff,
(1UL << USBHSPHY_TEST_CLK) |
(2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN));
regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff,
(0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN));
regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff,
(1UL << USBHSPHY_TEST_CLK) |
(0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN));
if (oxnas->use_pllb) /* use pllb clock */
regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff,
USB_CLK_INTERNAL | USB_INT_CLK_PLLB);
else /* use ref300 derived clock */
regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff,
USB_CLK_INTERNAL | USB_INT_CLK_REF300);
if (oxnas->use_phya) {
/* Configure USB PHYA as a host */
regmap_update_bits(oxnas->syscon, USB_CTRL_REGOFFSET, USBAMUX_DEVICE, 0);
}
/* Enable the clock to the USB block */
clk_prepare_enable(oxnas->clk);
}
static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
{
reset_control_assert(oxnas->rst_host);
reset_control_assert(oxnas->rst_phya);
reset_control_assert(oxnas->rst_phyb);
if (oxnas->use_pllb) {
clk_disable_unprepare(oxnas->phyref);
clk_disable_unprepare(oxnas->refsrc);
}
clk_disable_unprepare(oxnas->clk);
}
static int ehci_oxnas_reset(struct usb_hcd *hcd)
{
#define txttfill_tuning reserved2[0]
struct ehci_hcd *ehci;
u32 tmp;
int retval = ehci_setup(hcd);
if (retval)
return retval;
ehci = hcd_to_ehci(hcd);
tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning);
tmp &= ~0x00ff0000;
tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning);
tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning);
tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning);
return retval;
}
static int ehci_oxnas_drv_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource res;
struct oxnas_hcd *oxnas;
int irq, err;
struct reset_control *rstc;
if (usb_disabled())
return -ENODEV;
if (!ofdev->dev.dma_mask)
ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask;
if (!ofdev->dev.coherent_dma_mask)
ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev,
dev_name(&ofdev->dev));
if (!hcd)
return -ENOMEM;
err = of_address_to_resource(np, 0, &res);
if (err)
goto err_res;
hcd->rsrc_start = res.start;
hcd->rsrc_len = resource_size(&res);
hcd->regs = devm_ioremap_resource(&ofdev->dev, &res);
if (IS_ERR(hcd->regs)) {
dev_err(&ofdev->dev, "devm_ioremap_resource failed\n");
err = PTR_ERR(hcd->regs);
goto err_ioremap;
}
oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
oxnas->use_pllb = of_property_read_bool(np, "oxsemi,ehci_use_pllb");
oxnas->use_phya = of_property_read_bool(np, "oxsemi,ehci_use_phya");
oxnas->syscon = syscon_regmap_lookup_by_phandle(np, "oxsemi,sys-ctrl");
if (IS_ERR(oxnas->syscon)) {
err = PTR_ERR(oxnas->syscon);
goto err_syscon;
}
oxnas->clk = of_clk_get_by_name(np, "usb");
if (IS_ERR(oxnas->clk)) {
err = PTR_ERR(oxnas->clk);
goto err_clk;
}
if (oxnas->use_pllb) {
oxnas->refsrc = of_clk_get_by_name(np, "refsrc");
if (IS_ERR(oxnas->refsrc)) {
err = PTR_ERR(oxnas->refsrc);
goto err_refsrc;
}
oxnas->phyref = of_clk_get_by_name(np, "phyref");
if (IS_ERR(oxnas->refsrc)) {
err = PTR_ERR(oxnas->refsrc);
goto err_phyref;
}
} else {
oxnas->refsrc = NULL;
oxnas->phyref = NULL;
}
rstc = devm_reset_control_get(&ofdev->dev, "host");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_host = rstc;
rstc = devm_reset_control_get(&ofdev->dev, "phya");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_phya = rstc;
rstc = devm_reset_control_get(&ofdev->dev, "phyb");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_phyb = rstc;
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
err = -EBUSY;
goto err_irq;
}
hcd->has_tt = 1;
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
start_oxnas_usb_ehci(oxnas);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
goto err_hcd;
return 0;
err_hcd:
stop_oxnas_usb_ehci(oxnas);
err_irq:
err_rst:
if (oxnas->phyref)
clk_put(oxnas->phyref);
err_phyref:
if (oxnas->refsrc)
clk_put(oxnas->refsrc);
err_refsrc:
clk_put(oxnas->clk);
err_syscon:
err_clk:
err_ioremap:
err_res:
usb_put_hcd(hcd);
return err;
}
static int ehci_oxnas_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
usb_remove_hcd(hcd);
if (oxnas->use_pllb) {
clk_disable_unprepare(oxnas->phyref);
clk_put(oxnas->phyref);
clk_disable_unprepare(oxnas->refsrc);
clk_put(oxnas->refsrc);
}
clk_disable_unprepare(oxnas->clk);
usb_put_hcd(hcd);
return 0;
}
static const struct of_device_id oxnas_ehci_dt_ids[] = {
{ .compatible = "plxtech,nas782x-ehci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids);
static struct platform_driver ehci_oxnas_driver = {
.probe = ehci_oxnas_drv_probe,
.remove = ehci_oxnas_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver.name = "oxnas-ehci",
.driver.of_match_table = oxnas_ehci_dt_ids,
};
static const struct ehci_driver_overrides oxnas_overrides __initconst = {
.reset = ehci_oxnas_reset,
.extra_priv_size = sizeof(struct oxnas_hcd),
};
static int __init ehci_oxnas_init(void)
{
if (usb_disabled())
return -ENODEV;
ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides);
return platform_driver_register(&ehci_oxnas_driver);
}
module_init(ehci_oxnas_init);
static void __exit ehci_oxnas_cleanup(void)
{
platform_driver_unregister(&ehci_oxnas_driver);
}
module_exit(ehci_oxnas_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:oxnas-ehci");
MODULE_LICENSE("GPL");