You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

283 lines
5.3 KiB

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,qca9560";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips74Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <25000000>;
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,qca9560-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,qca9560-gpio",
"qca,ar9340-gpio";
reg = <0x18040000 0x28>;
interrupts = <2>;
ngpios = <24>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
reg = <0x1804002c 0x40>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x40 0x2 0x2>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,qca9560-pll", "syscon";
reg = <0x18050000 0x50>;
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
clocks = <&extosc>;
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,qca9560-reset",
"qca,ar7100-reset",
"simple-bus";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
interrupt-parent = <&cpuintc>;
intc3: interrupt-controller@3 {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <3>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0x1f000>, /* pcie rc */
<0x1000000>, /* usb1 */
<0x10000000>; /* usb2 */
};
};
rst2: reset-controller@180600c0 {
compatible = "qca,qca9560-reset",
"qca,ar7100-reset",
"simple-bus";
reg = <0x180600c0 0x4>;
#reset-cells = <1>;
};
wmac: wmac@18100000 {
compatible = "qca,qca9560-wmac";
reg = <0x18100000 0x10000>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
status = "disabled";
};
pcie: pcie-controller@18250000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x18250000 0x1000>, /* CRP */
<0x18280000 0x100>, /* CTRL */
<0x16000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc3>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie 0>;
status = "disabled";
};
};
usb0: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1d8>;
interrupt-parent = <&intc3>;
interrupts = <1>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy0";
phys = <&usb_phy0>;
status = "disabled";
};
usb1: usb@1b400000 {
compatible = "generic-ehci";
reg = <0x1b400000 0x1d8>;
interrupt-parent = <&intc3>;
interrupts = <2>;
resets = <&rst2 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy1";
phys = <&usb_phy1>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,qca9560-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
usb_phy0: usb-phy {
compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
usb_phy1: usb-phy {
compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst2 4>, <&rst2 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&mdio0 {
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,qca9560-eth", "syscon";
pll-data = <0x03000000 0x00000101 0x00001919>;
pll-reg = <0 0x48 0>;
pll-handle = <&pll>;
phy-mode = "sgmii";
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
};
&eth1 {
compatible = "qca,qca9560-eth", "syscon";
phy-mode = "gmii";
resets = <&rst 13>;
reset-names = "mac";
status = "disabled";
};