You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Bauer b368373fab mpc85xx: add support for OCEDO Panda ... CPU: FSL P1020 (2x 800MHz E500 PPC) RAM: 1GB DDR3 FLASH: 256MiB NAND WiFi: 2x Atheros AR9382 2x2:2 abgn ETH: 2x BCM54616S - 1x BCM53128 8-port switch LED: 5x LEDs (Power, WiFi1, WiFi2, N/D, SYS) BTN: 1x RESET Installation ------------ 1. Download initrams kernel image, dtb binary and sysupgrade image. 2. Place initramfs kernel into tftp root directory. Rename to "panda-uimage-factory". 3. Place dtb binary into tftp root directory. Rename to "panda.fdt". 4. Start tftp server on 192.168.100.8/24. 5. Power up the device with the reset button pressed. It will download the initrams and dtb via tftp and boot into OpenWRT in RAM. 6. SSH into the device and remove the factory partitions. > ubirmvol /dev/ubi0 --name=kernel1 > ubirmvol /dev/ubi0 --name=rootfs1 > ubirmvol /dev/ubi0 --name=devicetree1 You will have around 60 MiB of free space with that. You can also delete "kernel2", "devicetree2", "rootfs2" and "storage" respectively in case you do not want to go back to the vendor firmware. 7. Modify the U-Boot bootcmd to allow for booting OpenWRT > fw_setenv bootcmd_owrt "ubi part ubi && ubi read 0x1000000 kernel && bootm 0x1000000" > fw_setenv bootargs_owrt "setenv bootargs console=ttyS0,115200 ubi.mtd=3,2048" > fw_setenv bootcmd "run bootargs_owrt; run bootcmd_owrt" 8. Transfer the sysupgrade image via scp into the /tmp directory. 9. Upgrade the device > sysupgrade -n /tmp/<imagename> Signed-off-by: David Bauer <mail@david-bauer.net>		6 years ago
..
apex	apex: Remove dead URL.	6 years ago
arm-trusted-firmware-sunxi	arm-trusted-firmware-sunxi: Replace with official ARM version	6 years ago
at91bootstrap	at91: Add SAMA5D2 PTC EK board	7 years ago
fconfig	fconfig: Remove dead URLs	6 years ago
grub2	grub2: fix regression caused by binutils-2.31.1	6 years ago
imx-bootlets	…
kexec-tools	kexec-tools: bump version to 2.0.16	7 years ago
kobs-ng	kobs-ng: add header for integer definitions	7 years ago
rbcfg	rbcfg: Implement CPU frequency control	7 years ago
uboot-ar71xx	uboot-ar71xx: fix musl host build	6 years ago
uboot-at91	at91: Add SAMA5D2 PTC EK board	7 years ago
uboot-envtools	mpc85xx: add support for OCEDO Panda	6 years ago
uboot-fritz4040	ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE	6 years ago
uboot-imx6	imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxi	6 years ago
uboot-kirkwood	uboot-kirkwood: fix malformed boot configuration	6 years ago
uboot-lantiq	uboot-lantiq: fix compile with modern host dtc	6 years ago
uboot-layerscape	layerscape: add LS1021AIOT board support	6 years ago
uboot-layerscape-armv8_32b	layerscape: add ls1012afrwy support and drop ls1012afrdm	6 years ago
uboot-mvebu	uboot-mvebu: fix build on hosts lacking pkg-config	7 years ago
uboot-mxs	uboot-mxs: bump to v2018.09	6 years ago
uboot-omap	omap: rename image for sysupgrade compatibility	6 years ago
uboot-oxnas	uboot-oxnas: fix typo accidentally committed during oxnas reboot	7 years ago
uboot-sunxi	uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detection	6 years ago
uboot-xburst	…
uboot-zynq	uboot-zynq: use a file to modify the default environment	6 years ago
yamonenv	yamonenv: Remove dead URLs	6 years ago