You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
John Crispin b233fdcfa2 cyassl: add support for SSL_set_tlsext_host_name 10 years ago
config config: add an option to enable KPROBE 10 years ago
docs docs: update remaining references to functions.sh 12 years ago
include config: add an option to enable KPROBE 10 years ago
package cyassl: add support for SSL_set_tlsext_host_name 10 years ago
scripts scripts/ipkg: remove file, it is obsolete 10 years ago
target ixp4xx: fix beeper module dependencies 10 years ago
toolchain uclibc: backport an upstream i386 syscall fix 10 years ago
tools tools: replace ipkg-utils with a reduced ipkg-build variant in scripts/ 10 years ago
.gitattributes
.gitignore add git-src to .gitignore 11 years ago
BSDmakefile
Config.in scripts/config: sync with linux upstream 10 years ago
LICENSE
Makefile build: clean up sitefiles, make them per-arch 10 years ago
README Add 'subversion' build dependency to README 10 years ago
feeds.conf.default feeds.conf.default: add new targets feed 10 years ago
rules.mk rules.mk: add newline definition 10 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
Your OpenWrt Project
http://openwrt.org