You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1632 lines
43 KiB
1632 lines
43 KiB
diff --git a/Documentation/devicetree/bindings/mmc/octeon-mmc.txt b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
|
|
new file mode 100644
|
|
index 0000000..40dd7f1
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
|
|
@@ -0,0 +1,69 @@
|
|
+* OCTEON SD/MMC Host Controller
|
|
+
|
|
+This controller is present on some members of the Cavium OCTEON SoC
|
|
+family, provide an interface for eMMC, MMC and SD devices. There is a
|
|
+single controller that may have several "slots" connected. These
|
|
+slots appear as children of the main controller node.
|
|
+The DMA engine is an integral part of the controller block.
|
|
+
|
|
+Required properties:
|
|
+- compatible : Should be "cavium,octeon-6130-mmc" or "cavium,octeon-7890-mmc"
|
|
+- reg : Two entries:
|
|
+ 1) The base address of the MMC controller register bank.
|
|
+ 2) The base address of the MMC DMA engine register bank.
|
|
+- interrupts :
|
|
+ For "cavium,octeon-6130-mmc": two entries:
|
|
+ 1) The MMC controller interrupt line.
|
|
+ 2) The MMC DMA engine interrupt line.
|
|
+ For "cavium,octeon-7890-mmc": nine entries:
|
|
+ 1) The next block transfer of a multiblock transfer has completed (BUF_DONE)
|
|
+ 2) Operation completed successfully (CMD_DONE).
|
|
+ 3) DMA transfer completed successfully (DMA_DONE).
|
|
+ 4) Operation encountered an error (CMD_ERR).
|
|
+ 5) DMA transfer encountered an error (DMA_ERR).
|
|
+ 6) Switch operation completed successfully (SWITCH_DONE).
|
|
+ 7) Switch operation encountered an error (SWITCH_ERR).
|
|
+ 8) Internal DMA engine request completion interrupt (DONE).
|
|
+ 9) Internal DMA FIFO underflow (FIFO).
|
|
+- #address-cells : Must be <1>
|
|
+- #size-cells : Must be <0>
|
|
+
|
|
+Required properties of child nodes:
|
|
+- compatible : Should be "cavium,octeon-6130-mmc-slot".
|
|
+- reg : The slot number.
|
|
+
|
|
+Optional properties of child nodes:
|
|
+- cd-gpios : Specify GPIOs for card detection
|
|
+- wp-gpios : Specify GPIOs for write protection
|
|
+- power-gpios : Specify GPIOs for power control
|
|
+- cavium,bus-max-width : The number of data lines present in the slot.
|
|
+ Default is 8.
|
|
+- spi-max-frequency : The maximum operating frequency of the slot.
|
|
+ Default is 52000000.
|
|
+- cavium,cmd-clk-skew : the amount of delay (in pS) past the clock edge
|
|
+ to sample the command pin.
|
|
+- cavium,dat-clk-skew : the amount of delay (in pS) past the clock edge
|
|
+ to sample the data pin.
|
|
+
|
|
+Example:
|
|
+ mmc@1180000002000 {
|
|
+ compatible = "cavium,octeon-6130-mmc";
|
|
+ reg = <0x11800 0x00002000 0x0 0x100>,
|
|
+ <0x11800 0x00000168 0x0 0x20>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ /* EMM irq, DMA irq */
|
|
+ interrupts = <1 19>, <0 63>;
|
|
+
|
|
+ /* The board only has a single MMC slot */
|
|
+ mmc-slot@0 {
|
|
+ compatible = "cavium,octeon-6130-mmc-slot";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ /* bus width can be 1, 4 or 8 */
|
|
+ cavium,bus-max-width = <8>;
|
|
+ cd-gpios = <&gpio 9 0>;
|
|
+ wp-gpios = <&gpio 10 0>;
|
|
+ power-gpios = <&gpio 8 0>;
|
|
+ };
|
|
+ };
|
|
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
|
|
index 2d6fbdd..5077dfa 100644
|
|
--- a/drivers/mmc/host/Kconfig
|
|
+++ b/drivers/mmc/host/Kconfig
|
|
@@ -338,6 +338,16 @@
|
|
|
|
If unsure, say N.
|
|
|
|
+config MMC_OCTEON
|
|
+ tristate "Cavium OCTEON Multimedia Card Interface support"
|
|
+ depends on CAVIUM_OCTEON_SOC
|
|
+ help
|
|
+ This selects Cavium OCTEON Multimedia card Interface.
|
|
+ If you have an OCTEON board with a Multimedia Card slot,
|
|
+ say Y or M here.
|
|
+
|
|
+ If unsure, say N.
|
|
+
|
|
config MMC_TIFM_SD
|
|
tristate "TI Flash Media MMC/SD Interface support"
|
|
depends on PCI
|
|
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
|
|
index f7b0a77..448bbc9 100644
|
|
--- a/drivers/mmc/host/Makefile
|
|
+++ b/drivers/mmc/host/Makefile
|
|
@@ -19,6 +19,7 @@ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
|
|
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
|
|
obj-$(CONFIG_MMC_WBSD) += wbsd.o
|
|
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
|
|
+obj-$(CONFIG_MMC_OCTEON) += octeon_mmc.o
|
|
obj-$(CONFIG_MMC_OMAP) += omap.o
|
|
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
|
|
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
|
|
diff --git a/drivers/mmc/host/octeon_mmc.c b/drivers/mmc/host/octeon_mmc.c
|
|
new file mode 100644
|
|
index 0000000..baba5a0
|
|
--- /dev/null
|
|
+++ b/drivers/mmc/host/octeon_mmc.c
|
|
@@ -0,0 +1,1518 @@
|
|
+/*
|
|
+ * Driver for MMC and SSD cards for Cavium OCTEON SOCs.
|
|
+ *
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ *
|
|
+ * Copyright (C) 2012-2014 Cavium Inc.
|
|
+ */
|
|
+
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/of_platform.h>
|
|
+#include <linux/scatterlist.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/of_gpio.h>
|
|
+#include <linux/blkdev.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/of.h>
|
|
+
|
|
+#include <linux/mmc/card.h>
|
|
+#include <linux/mmc/host.h>
|
|
+#include <linux/mmc/mmc.h>
|
|
+#include <linux/mmc/sd.h>
|
|
+#include <net/irda/parameters.h>
|
|
+
|
|
+#include <asm/byteorder.h>
|
|
+#include <asm/octeon/octeon.h>
|
|
+#include <asm/octeon/cvmx-mio-defs.h>
|
|
+
|
|
+#define DRV_NAME "octeon_mmc"
|
|
+
|
|
+#define OCTEON_MAX_MMC 4
|
|
+
|
|
+#define OCT_MIO_NDF_DMA_CFG 0x00
|
|
+#define OCT_MIO_EMM_DMA_ADR 0x08
|
|
+
|
|
+#define OCT_MIO_EMM_CFG 0x00
|
|
+#define OCT_MIO_EMM_SWITCH 0x48
|
|
+#define OCT_MIO_EMM_DMA 0x50
|
|
+#define OCT_MIO_EMM_CMD 0x58
|
|
+#define OCT_MIO_EMM_RSP_STS 0x60
|
|
+#define OCT_MIO_EMM_RSP_LO 0x68
|
|
+#define OCT_MIO_EMM_RSP_HI 0x70
|
|
+#define OCT_MIO_EMM_INT 0x78
|
|
+#define OCT_MIO_EMM_INT_EN 0x80
|
|
+#define OCT_MIO_EMM_WDOG 0x88
|
|
+#define OCT_MIO_EMM_SAMPLE 0x90
|
|
+#define OCT_MIO_EMM_STS_MASK 0x98
|
|
+#define OCT_MIO_EMM_RCA 0xa0
|
|
+#define OCT_MIO_EMM_BUF_IDX 0xe0
|
|
+#define OCT_MIO_EMM_BUF_DAT 0xe8
|
|
+
|
|
+#define CVMX_MIO_BOOT_CTL CVMX_ADD_IO_SEG(0x00011800000000D0ull)
|
|
+
|
|
+struct octeon_mmc_host {
|
|
+ u64 base;
|
|
+ u64 ndf_base;
|
|
+ u64 emm_cfg;
|
|
+ u64 n_minus_one; /* OCTEON II workaround location */
|
|
+ int last_slot;
|
|
+
|
|
+ struct semaphore mmc_serializer;
|
|
+ struct mmc_request *current_req;
|
|
+ unsigned int linear_buf_size;
|
|
+ void *linear_buf;
|
|
+ struct sg_mapping_iter smi;
|
|
+ int sg_idx;
|
|
+ bool dma_active;
|
|
+
|
|
+ struct platform_device *pdev;
|
|
+ int global_pwr_gpio;
|
|
+ bool global_pwr_gpio_low;
|
|
+ bool dma_err_pending;
|
|
+ bool need_bootbus_lock;
|
|
+ bool big_dma_addr;
|
|
+ bool need_irq_handler_lock;
|
|
+ spinlock_t irq_handler_lock;
|
|
+
|
|
+ struct octeon_mmc_slot *slot[OCTEON_MAX_MMC];
|
|
+};
|
|
+
|
|
+struct octeon_mmc_slot {
|
|
+ struct mmc_host *mmc; /* slot-level mmc_core object */
|
|
+ struct octeon_mmc_host *host; /* common hw for all 4 slots */
|
|
+
|
|
+ unsigned int clock;
|
|
+ unsigned int sclock;
|
|
+
|
|
+ u64 cached_switch;
|
|
+ u64 cached_rca;
|
|
+
|
|
+ unsigned int cmd_cnt; /* sample delay */
|
|
+ unsigned int dat_cnt; /* sample delay */
|
|
+
|
|
+ int bus_width;
|
|
+ int bus_id;
|
|
+ int ro_gpio;
|
|
+ int cd_gpio;
|
|
+ int pwr_gpio;
|
|
+ bool cd_gpio_low;
|
|
+ bool ro_gpio_low;
|
|
+ bool pwr_gpio_low;
|
|
+};
|
|
+
|
|
+static int bb_size = 1 << 16;
|
|
+module_param(bb_size, int, S_IRUGO);
|
|
+MODULE_PARM_DESC(bb_size,
|
|
+ "Size of DMA linearizing buffer (max transfer size).");
|
|
+
|
|
+static int ddr = 2;
|
|
+module_param(ddr, int, S_IRUGO);
|
|
+MODULE_PARM_DESC(ddr,
|
|
+ "enable DoubleDataRate clocking: 0=no, 1=always, 2=at spi-max-frequency/2");
|
|
+
|
|
+#if 0
|
|
+#define octeon_mmc_dbg trace_printk
|
|
+#else
|
|
+static inline void octeon_mmc_dbg(const char *s, ...) { }
|
|
+#endif
|
|
+
|
|
+static void octeon_mmc_acquire_bus(struct octeon_mmc_host *host)
|
|
+{
|
|
+ if (host->need_bootbus_lock) {
|
|
+ down(&octeon_bootbus_sem);
|
|
+ /* On cn70XX switch the mmc unit onto the bus. */
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN70XX))
|
|
+ cvmx_write_csr(CVMX_MIO_BOOT_CTL, 0);
|
|
+ } else {
|
|
+ down(&host->mmc_serializer);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void octeon_mmc_release_bus(struct octeon_mmc_host *host)
|
|
+{
|
|
+ if (host->need_bootbus_lock)
|
|
+ up(&octeon_bootbus_sem);
|
|
+ else
|
|
+ up(&host->mmc_serializer);
|
|
+}
|
|
+
|
|
+struct octeon_mmc_cr_type {
|
|
+ u8 ctype;
|
|
+ u8 rtype;
|
|
+};
|
|
+
|
|
+/*
|
|
+ * The OCTEON MMC host hardware assumes that all commands have fixed
|
|
+ * command and response types. These are correct if MMC devices are
|
|
+ * being used. However, non-MMC devices like SD use command and
|
|
+ * response types that are unexpected by the host hardware.
|
|
+ *
|
|
+ * The command and response types can be overridden by supplying an
|
|
+ * XOR value that is applied to the type. We calculate the XOR value
|
|
+ * from the values in this table and the flags passed from the MMC
|
|
+ * core.
|
|
+ */
|
|
+static struct octeon_mmc_cr_type octeon_mmc_cr_types[] = {
|
|
+ {0, 0}, /* CMD0 */
|
|
+ {0, 3}, /* CMD1 */
|
|
+ {0, 2}, /* CMD2 */
|
|
+ {0, 1}, /* CMD3 */
|
|
+ {0, 0}, /* CMD4 */
|
|
+ {0, 1}, /* CMD5 */
|
|
+ {0, 1}, /* CMD6 */
|
|
+ {0, 1}, /* CMD7 */
|
|
+ {1, 1}, /* CMD8 */
|
|
+ {0, 2}, /* CMD9 */
|
|
+ {0, 2}, /* CMD10 */
|
|
+ {1, 1}, /* CMD11 */
|
|
+ {0, 1}, /* CMD12 */
|
|
+ {0, 1}, /* CMD13 */
|
|
+ {1, 1}, /* CMD14 */
|
|
+ {0, 0}, /* CMD15 */
|
|
+ {0, 1}, /* CMD16 */
|
|
+ {1, 1}, /* CMD17 */
|
|
+ {1, 1}, /* CMD18 */
|
|
+ {3, 1}, /* CMD19 */
|
|
+ {2, 1}, /* CMD20 */
|
|
+ {0, 0}, /* CMD21 */
|
|
+ {0, 0}, /* CMD22 */
|
|
+ {0, 1}, /* CMD23 */
|
|
+ {2, 1}, /* CMD24 */
|
|
+ {2, 1}, /* CMD25 */
|
|
+ {2, 1}, /* CMD26 */
|
|
+ {2, 1}, /* CMD27 */
|
|
+ {0, 1}, /* CMD28 */
|
|
+ {0, 1}, /* CMD29 */
|
|
+ {1, 1}, /* CMD30 */
|
|
+ {1, 1}, /* CMD31 */
|
|
+ {0, 0}, /* CMD32 */
|
|
+ {0, 0}, /* CMD33 */
|
|
+ {0, 0}, /* CMD34 */
|
|
+ {0, 1}, /* CMD35 */
|
|
+ {0, 1}, /* CMD36 */
|
|
+ {0, 0}, /* CMD37 */
|
|
+ {0, 1}, /* CMD38 */
|
|
+ {0, 4}, /* CMD39 */
|
|
+ {0, 5}, /* CMD40 */
|
|
+ {0, 0}, /* CMD41 */
|
|
+ {2, 1}, /* CMD42 */
|
|
+ {0, 0}, /* CMD43 */
|
|
+ {0, 0}, /* CMD44 */
|
|
+ {0, 0}, /* CMD45 */
|
|
+ {0, 0}, /* CMD46 */
|
|
+ {0, 0}, /* CMD47 */
|
|
+ {0, 0}, /* CMD48 */
|
|
+ {0, 0}, /* CMD49 */
|
|
+ {0, 0}, /* CMD50 */
|
|
+ {0, 0}, /* CMD51 */
|
|
+ {0, 0}, /* CMD52 */
|
|
+ {0, 0}, /* CMD53 */
|
|
+ {0, 0}, /* CMD54 */
|
|
+ {0, 1}, /* CMD55 */
|
|
+ {0xff, 0xff}, /* CMD56 */
|
|
+ {0, 0}, /* CMD57 */
|
|
+ {0, 0}, /* CMD58 */
|
|
+ {0, 0}, /* CMD59 */
|
|
+ {0, 0}, /* CMD60 */
|
|
+ {0, 0}, /* CMD61 */
|
|
+ {0, 0}, /* CMD62 */
|
|
+ {0, 0} /* CMD63 */
|
|
+};
|
|
+
|
|
+struct octeon_mmc_cr_mods {
|
|
+ u8 ctype_xor;
|
|
+ u8 rtype_xor;
|
|
+};
|
|
+
|
|
+/*
|
|
+ * The functions below are used for the EMMC-17978 workaround.
|
|
+ *
|
|
+ * Due to an imperfection in the design of the MMC bus hardware,
|
|
+ * the 2nd to last cache block of a DMA read must be locked into the L2 Cache.
|
|
+ * Otherwise, data corruption may occur.
|
|
+ */
|
|
+
|
|
+static inline void *phys_to_ptr(u64 address)
|
|
+{
|
|
+ return (void *)(address | (1ull<<63)); /* XKPHYS */
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Lock a single line into L2. The line is zeroed before locking
|
|
+ * to make sure no dram accesses are made.
|
|
+ *
|
|
+ * @addr Physical address to lock
|
|
+ */
|
|
+static void l2c_lock_line(u64 addr)
|
|
+{
|
|
+ char *addr_ptr = phys_to_ptr(addr);
|
|
+
|
|
+ asm volatile (
|
|
+ "cache 31, %[line]" /* Unlock the line */
|
|
+ :: [line] "m" (*addr_ptr));
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Locks a memory region in the L2 cache
|
|
+ *
|
|
+ * @start - start address to begin locking
|
|
+ * @len - length in bytes to lock
|
|
+ */
|
|
+static void l2c_lock_mem_region(u64 start, u64 len)
|
|
+{
|
|
+ u64 end;
|
|
+
|
|
+ /* Round start/end to cache line boundaries */
|
|
+ end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
|
|
+ start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
|
|
+
|
|
+ while (start <= end) {
|
|
+ l2c_lock_line(start);
|
|
+ start += CVMX_CACHE_LINE_SIZE;
|
|
+ }
|
|
+ asm volatile("sync");
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Unlock a single line in the L2 cache.
|
|
+ *
|
|
+ * @addr Physical address to unlock
|
|
+ *
|
|
+ * Return Zero on success
|
|
+ */
|
|
+static void l2c_unlock_line(u64 addr)
|
|
+{
|
|
+ char *addr_ptr = phys_to_ptr(addr);
|
|
+ asm volatile (
|
|
+ "cache 23, %[line]" /* Unlock the line */
|
|
+ :: [line] "m" (*addr_ptr));
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Unlock a memory region in the L2 cache
|
|
+ *
|
|
+ * @start - start address to unlock
|
|
+ * @len - length to unlock in bytes
|
|
+ */
|
|
+static void l2c_unlock_mem_region(u64 start, u64 len)
|
|
+{
|
|
+ u64 end;
|
|
+
|
|
+ /* Round start/end to cache line boundaries */
|
|
+ end = ALIGN(start + len - 1, CVMX_CACHE_LINE_SIZE);
|
|
+ start = ALIGN(start, CVMX_CACHE_LINE_SIZE);
|
|
+
|
|
+ while (start <= end) {
|
|
+ l2c_unlock_line(start);
|
|
+ start += CVMX_CACHE_LINE_SIZE;
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct octeon_mmc_cr_mods octeon_mmc_get_cr_mods(struct mmc_command *cmd)
|
|
+{
|
|
+ struct octeon_mmc_cr_type *cr;
|
|
+ u8 desired_ctype, hardware_ctype;
|
|
+ u8 desired_rtype, hardware_rtype;
|
|
+ struct octeon_mmc_cr_mods r;
|
|
+
|
|
+ desired_ctype = desired_rtype = 0;
|
|
+
|
|
+ cr = octeon_mmc_cr_types + (cmd->opcode & 0x3f);
|
|
+ hardware_ctype = cr->ctype;
|
|
+ hardware_rtype = cr->rtype;
|
|
+ if (cmd->opcode == 56) { /* CMD56 GEN_CMD */
|
|
+ hardware_ctype = (cmd->arg & 1) ? 1 : 2;
|
|
+ }
|
|
+
|
|
+ switch (mmc_cmd_type(cmd)) {
|
|
+ case MMC_CMD_ADTC:
|
|
+ desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
|
|
+ break;
|
|
+ case MMC_CMD_AC:
|
|
+ case MMC_CMD_BC:
|
|
+ case MMC_CMD_BCR:
|
|
+ desired_ctype = 0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ switch (mmc_resp_type(cmd)) {
|
|
+ case MMC_RSP_NONE:
|
|
+ desired_rtype = 0;
|
|
+ break;
|
|
+ case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
|
|
+ case MMC_RSP_R1B:
|
|
+ desired_rtype = 1;
|
|
+ break;
|
|
+ case MMC_RSP_R2:
|
|
+ desired_rtype = 2;
|
|
+ break;
|
|
+ case MMC_RSP_R3: /* MMC_RSP_R4 */
|
|
+ desired_rtype = 3;
|
|
+ break;
|
|
+ }
|
|
+ r.ctype_xor = desired_ctype ^ hardware_ctype;
|
|
+ r.rtype_xor = desired_rtype ^ hardware_rtype;
|
|
+ return r;
|
|
+}
|
|
+
|
|
+static bool octeon_mmc_switch_val_changed(struct octeon_mmc_slot *slot,
|
|
+ u64 new_val)
|
|
+{
|
|
+ /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
|
|
+ u64 m = 0x3001070fffffffffull;
|
|
+
|
|
+ return (slot->cached_switch & m) != (new_val & m);
|
|
+}
|
|
+
|
|
+static unsigned int octeon_mmc_timeout_to_wdog(struct octeon_mmc_slot *slot,
|
|
+ unsigned int ns)
|
|
+{
|
|
+ u64 bt = (u64)slot->clock * (u64)ns;
|
|
+
|
|
+ return (unsigned int)(bt / 1000000000);
|
|
+}
|
|
+
|
|
+static irqreturn_t octeon_mmc_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct octeon_mmc_host *host = dev_id;
|
|
+ union cvmx_mio_emm_int emm_int;
|
|
+ struct mmc_request *req;
|
|
+ bool host_done;
|
|
+ union cvmx_mio_emm_rsp_sts rsp_sts;
|
|
+ unsigned long flags = 0;
|
|
+
|
|
+ if (host->need_irq_handler_lock)
|
|
+ spin_lock_irqsave(&host->irq_handler_lock, flags);
|
|
+ emm_int.u64 = cvmx_read_csr(host->base + OCT_MIO_EMM_INT);
|
|
+ req = host->current_req;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
|
|
+
|
|
+ octeon_mmc_dbg("Got interrupt: EMM_INT = 0x%llx\n", emm_int.u64);
|
|
+
|
|
+ if (!req)
|
|
+ goto out;
|
|
+
|
|
+ rsp_sts.u64 = cvmx_read_csr(host->base + OCT_MIO_EMM_RSP_STS);
|
|
+ octeon_mmc_dbg("octeon_mmc_interrupt MIO_EMM_RSP_STS 0x%llx\n",
|
|
+ rsp_sts.u64);
|
|
+
|
|
+ if (host->dma_err_pending) {
|
|
+ host->current_req = NULL;
|
|
+ host->dma_err_pending = false;
|
|
+ req->done(req);
|
|
+ host_done = true;
|
|
+ goto no_req_done;
|
|
+ }
|
|
+
|
|
+ if (!host->dma_active && emm_int.s.buf_done && req->data) {
|
|
+ unsigned int type = (rsp_sts.u64 >> 7) & 3;
|
|
+
|
|
+ if (type == 1) {
|
|
+ /* Read */
|
|
+ int dbuf = rsp_sts.s.dbuf;
|
|
+ struct sg_mapping_iter *smi = &host->smi;
|
|
+ unsigned int data_len =
|
|
+ req->data->blksz * req->data->blocks;
|
|
+ unsigned int bytes_xfered;
|
|
+ u64 dat = 0;
|
|
+ int shift = -1;
|
|
+
|
|
+ /* Auto inc from offset zero */
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_BUF_IDX,
|
|
+ (u64)(0x10000 | (dbuf << 6)));
|
|
+
|
|
+ for (bytes_xfered = 0; bytes_xfered < data_len;) {
|
|
+ if (smi->consumed >= smi->length) {
|
|
+ if (!sg_miter_next(smi))
|
|
+ break;
|
|
+ smi->consumed = 0;
|
|
+ }
|
|
+ if (shift < 0) {
|
|
+ dat = cvmx_read_csr(host->base +
|
|
+ OCT_MIO_EMM_BUF_DAT);
|
|
+ shift = 56;
|
|
+ }
|
|
+
|
|
+ while (smi->consumed < smi->length &&
|
|
+ shift >= 0) {
|
|
+ ((u8 *)(smi->addr))[smi->consumed] =
|
|
+ (dat >> shift) & 0xff;
|
|
+ bytes_xfered++;
|
|
+ smi->consumed++;
|
|
+ shift -= 8;
|
|
+ }
|
|
+ }
|
|
+ sg_miter_stop(smi);
|
|
+ req->data->bytes_xfered = bytes_xfered;
|
|
+ req->data->error = 0;
|
|
+ } else if (type == 2) {
|
|
+ /* write */
|
|
+ req->data->bytes_xfered = req->data->blksz *
|
|
+ req->data->blocks;
|
|
+ req->data->error = 0;
|
|
+ }
|
|
+ }
|
|
+ host_done = emm_int.s.cmd_done || emm_int.s.dma_done ||
|
|
+ emm_int.s.cmd_err || emm_int.s.dma_err;
|
|
+ if (host_done && req->done) {
|
|
+ if (rsp_sts.s.rsp_bad_sts ||
|
|
+ rsp_sts.s.rsp_crc_err ||
|
|
+ rsp_sts.s.rsp_timeout ||
|
|
+ rsp_sts.s.blk_crc_err ||
|
|
+ rsp_sts.s.blk_timeout ||
|
|
+ rsp_sts.s.dbuf_err) {
|
|
+ req->cmd->error = -EILSEQ;
|
|
+ } else {
|
|
+ req->cmd->error = 0;
|
|
+ }
|
|
+
|
|
+ if (host->dma_active && req->data) {
|
|
+ req->data->error = 0;
|
|
+ req->data->bytes_xfered = req->data->blocks *
|
|
+ req->data->blksz;
|
|
+ if (!(req->data->flags & MMC_DATA_WRITE) &&
|
|
+ req->data->sg_len > 1) {
|
|
+ size_t r = sg_copy_from_buffer(req->data->sg,
|
|
+ req->data->sg_len, host->linear_buf,
|
|
+ req->data->bytes_xfered);
|
|
+ WARN_ON(r != req->data->bytes_xfered);
|
|
+ }
|
|
+ }
|
|
+ if (rsp_sts.s.rsp_val) {
|
|
+ u64 rsp_hi;
|
|
+ u64 rsp_lo = cvmx_read_csr(
|
|
+ host->base + OCT_MIO_EMM_RSP_LO);
|
|
+
|
|
+ switch (rsp_sts.s.rsp_type) {
|
|
+ case 1:
|
|
+ case 3:
|
|
+ req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
|
|
+ req->cmd->resp[1] = 0;
|
|
+ req->cmd->resp[2] = 0;
|
|
+ req->cmd->resp[3] = 0;
|
|
+ break;
|
|
+ case 2:
|
|
+ req->cmd->resp[3] = rsp_lo & 0xffffffff;
|
|
+ req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
|
|
+ rsp_hi = cvmx_read_csr(host->base +
|
|
+ OCT_MIO_EMM_RSP_HI);
|
|
+ req->cmd->resp[1] = rsp_hi & 0xffffffff;
|
|
+ req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
|
|
+ break;
|
|
+ default:
|
|
+ octeon_mmc_dbg("octeon_mmc_interrupt unhandled rsp_val %d\n",
|
|
+ rsp_sts.s.rsp_type);
|
|
+ break;
|
|
+ }
|
|
+ octeon_mmc_dbg("octeon_mmc_interrupt resp %08x %08x %08x %08x\n",
|
|
+ req->cmd->resp[0], req->cmd->resp[1],
|
|
+ req->cmd->resp[2], req->cmd->resp[3]);
|
|
+ }
|
|
+ if (emm_int.s.dma_err && rsp_sts.s.dma_pend) {
|
|
+ /* Try to clean up failed DMA */
|
|
+ union cvmx_mio_emm_dma emm_dma;
|
|
+
|
|
+ emm_dma.u64 =
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_DMA);
|
|
+ emm_dma.s.dma_val = 1;
|
|
+ emm_dma.s.dat_null = 1;
|
|
+ emm_dma.s.bus_id = rsp_sts.s.bus_id;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_DMA,
|
|
+ emm_dma.u64);
|
|
+ host->dma_err_pending = true;
|
|
+ host_done = false;
|
|
+ goto no_req_done;
|
|
+ }
|
|
+
|
|
+ host->current_req = NULL;
|
|
+ req->done(req);
|
|
+ }
|
|
+no_req_done:
|
|
+ if (host->n_minus_one) {
|
|
+ l2c_unlock_mem_region(host->n_minus_one, 512);
|
|
+ host->n_minus_one = 0;
|
|
+ }
|
|
+ if (host_done)
|
|
+ octeon_mmc_release_bus(host);
|
|
+out:
|
|
+ if (host->need_irq_handler_lock)
|
|
+ spin_unlock_irqrestore(&host->irq_handler_lock, flags);
|
|
+ return IRQ_RETVAL(emm_int.u64 != 0);
|
|
+}
|
|
+
|
|
+static void octeon_mmc_switch_to(struct octeon_mmc_slot *slot)
|
|
+{
|
|
+ struct octeon_mmc_host *host = slot->host;
|
|
+ struct octeon_mmc_slot *old_slot;
|
|
+ union cvmx_mio_emm_switch sw;
|
|
+ union cvmx_mio_emm_sample samp;
|
|
+
|
|
+ if (slot->bus_id == host->last_slot)
|
|
+ goto out;
|
|
+
|
|
+ if (host->last_slot >= 0) {
|
|
+ old_slot = host->slot[host->last_slot];
|
|
+ old_slot->cached_switch =
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_SWITCH);
|
|
+ old_slot->cached_rca =
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_RCA);
|
|
+ }
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_RCA, slot->cached_rca);
|
|
+ sw.u64 = slot->cached_switch;
|
|
+ sw.s.bus_id = 0;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, sw.u64);
|
|
+ sw.s.bus_id = slot->bus_id;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, sw.u64);
|
|
+
|
|
+ samp.u64 = 0;
|
|
+ samp.s.cmd_cnt = slot->cmd_cnt;
|
|
+ samp.s.dat_cnt = slot->dat_cnt;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SAMPLE, samp.u64);
|
|
+out:
|
|
+ host->last_slot = slot->bus_id;
|
|
+}
|
|
+
|
|
+static void octeon_mmc_dma_request(struct mmc_host *mmc,
|
|
+ struct mmc_request *mrq)
|
|
+{
|
|
+ struct octeon_mmc_slot *slot;
|
|
+ struct octeon_mmc_host *host;
|
|
+ struct mmc_command *cmd;
|
|
+ struct mmc_data *data;
|
|
+ union cvmx_mio_emm_int emm_int;
|
|
+ union cvmx_mio_emm_dma emm_dma;
|
|
+ union cvmx_mio_ndf_dma_cfg dma_cfg;
|
|
+
|
|
+ cmd = mrq->cmd;
|
|
+ if (mrq->data == NULL || mrq->data->sg == NULL || !mrq->data->sg_len ||
|
|
+ mrq->stop == NULL || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
|
|
+ dev_err(&mmc->card->dev,
|
|
+ "Error: octeon_mmc_dma_request no data\n");
|
|
+ cmd->error = -EINVAL;
|
|
+ if (mrq->done)
|
|
+ mrq->done(mrq);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ slot = mmc_priv(mmc);
|
|
+ host = slot->host;
|
|
+
|
|
+ /* Only a single user of the bootbus at a time. */
|
|
+ octeon_mmc_acquire_bus(host);
|
|
+
|
|
+ octeon_mmc_switch_to(slot);
|
|
+
|
|
+ data = mrq->data;
|
|
+
|
|
+ if (data->timeout_ns) {
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
|
|
+ octeon_mmc_timeout_to_wdog(slot, data->timeout_ns));
|
|
+ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_WDOG));
|
|
+ }
|
|
+
|
|
+ WARN_ON(host->current_req);
|
|
+ host->current_req = mrq;
|
|
+
|
|
+ host->sg_idx = 0;
|
|
+
|
|
+ WARN_ON(data->blksz * data->blocks > host->linear_buf_size);
|
|
+
|
|
+ if ((data->flags & MMC_DATA_WRITE) && data->sg_len > 1) {
|
|
+ size_t r = sg_copy_to_buffer(data->sg, data->sg_len,
|
|
+ host->linear_buf, data->blksz * data->blocks);
|
|
+ WARN_ON(data->blksz * data->blocks != r);
|
|
+ }
|
|
+
|
|
+ dma_cfg.u64 = 0;
|
|
+ dma_cfg.s.en = 1;
|
|
+ dma_cfg.s.rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
|
+#ifdef __LITTLE_ENDIAN
|
|
+ dma_cfg.s.endian = 1;
|
|
+#endif
|
|
+ dma_cfg.s.size = ((data->blksz * data->blocks) / 8) - 1;
|
|
+ if (!host->big_dma_addr) {
|
|
+ if (data->sg_len > 1)
|
|
+ dma_cfg.s.adr = virt_to_phys(host->linear_buf);
|
|
+ else
|
|
+ dma_cfg.s.adr = sg_phys(data->sg);
|
|
+ }
|
|
+ cvmx_write_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG, dma_cfg.u64);
|
|
+ octeon_mmc_dbg("MIO_NDF_DMA_CFG: %016llx\n",
|
|
+ (unsigned long long)dma_cfg.u64);
|
|
+ if (host->big_dma_addr) {
|
|
+ u64 addr;
|
|
+
|
|
+ if (data->sg_len > 1)
|
|
+ addr = virt_to_phys(host->linear_buf);
|
|
+ else
|
|
+ addr = sg_phys(data->sg);
|
|
+ cvmx_write_csr(host->ndf_base + OCT_MIO_EMM_DMA_ADR, addr);
|
|
+ octeon_mmc_dbg("MIO_EMM_DMA_ADR: %016llx\n",
|
|
+ (unsigned long long)addr);
|
|
+ }
|
|
+
|
|
+ emm_dma.u64 = 0;
|
|
+ emm_dma.s.bus_id = slot->bus_id;
|
|
+ emm_dma.s.dma_val = 1;
|
|
+ emm_dma.s.sector = mmc_card_blockaddr(mmc->card) ? 1 : 0;
|
|
+ emm_dma.s.rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
|
+ if (mmc_card_mmc(mmc->card) ||
|
|
+ (mmc_card_sd(mmc->card) &&
|
|
+ (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
|
|
+ emm_dma.s.multi = 1;
|
|
+ emm_dma.s.block_cnt = data->blocks;
|
|
+ emm_dma.s.card_addr = cmd->arg;
|
|
+
|
|
+ emm_int.u64 = 0;
|
|
+ emm_int.s.dma_done = 1;
|
|
+ emm_int.s.cmd_err = 1;
|
|
+ emm_int.s.dma_err = 1;
|
|
+ /* Clear the bit. */
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT_EN, emm_int.u64);
|
|
+ host->dma_active = true;
|
|
+
|
|
+ if ((OCTEON_IS_MODEL(OCTEON_CN6XXX) ||
|
|
+ OCTEON_IS_MODEL(OCTEON_CNF7XXX)) &&
|
|
+ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK &&
|
|
+ (data->blksz * data->blocks) > 1024) {
|
|
+ host->n_minus_one = dma_cfg.s.adr +
|
|
+ (data->blksz * data->blocks) - 1024;
|
|
+ l2c_lock_mem_region(host->n_minus_one, 512);
|
|
+ }
|
|
+
|
|
+ if (mmc->card && mmc_card_sd(mmc->card))
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK,
|
|
+ 0x00b00000ull);
|
|
+ else
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK,
|
|
+ 0xe4f90080ull);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_DMA, emm_dma.u64);
|
|
+ octeon_mmc_dbg("MIO_EMM_DMA: %llx\n", emm_dma.u64);
|
|
+}
|
|
+
|
|
+static void octeon_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
+{
|
|
+ struct octeon_mmc_slot *slot;
|
|
+ struct octeon_mmc_host *host;
|
|
+ struct mmc_command *cmd;
|
|
+ union cvmx_mio_emm_int emm_int;
|
|
+ union cvmx_mio_emm_cmd emm_cmd;
|
|
+ struct octeon_mmc_cr_mods mods;
|
|
+
|
|
+ cmd = mrq->cmd;
|
|
+
|
|
+ if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
|
|
+ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) {
|
|
+ octeon_mmc_dma_request(mmc, mrq);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ mods = octeon_mmc_get_cr_mods(cmd);
|
|
+
|
|
+ slot = mmc_priv(mmc);
|
|
+ host = slot->host;
|
|
+
|
|
+ /* Only a single user of the bootbus at a time. */
|
|
+ octeon_mmc_acquire_bus(host);
|
|
+
|
|
+ octeon_mmc_switch_to(slot);
|
|
+
|
|
+ WARN_ON(host->current_req);
|
|
+ host->current_req = mrq;
|
|
+
|
|
+ emm_int.u64 = 0;
|
|
+ emm_int.s.cmd_done = 1;
|
|
+ emm_int.s.cmd_err = 1;
|
|
+ if (cmd->data) {
|
|
+ octeon_mmc_dbg("command has data\n");
|
|
+ if (cmd->data->flags & MMC_DATA_READ) {
|
|
+ sg_miter_start(&host->smi, mrq->data->sg,
|
|
+ mrq->data->sg_len,
|
|
+ SG_MITER_ATOMIC | SG_MITER_TO_SG);
|
|
+ } else {
|
|
+ struct sg_mapping_iter *smi = &host->smi;
|
|
+ unsigned int data_len =
|
|
+ mrq->data->blksz * mrq->data->blocks;
|
|
+ unsigned int bytes_xfered;
|
|
+ u64 dat = 0;
|
|
+ int shift = 56;
|
|
+ /*
|
|
+ * Copy data to the xmit buffer before
|
|
+ * issuing the command
|
|
+ */
|
|
+ sg_miter_start(smi, mrq->data->sg,
|
|
+ mrq->data->sg_len, SG_MITER_FROM_SG);
|
|
+ /* Auto inc from offset zero, dbuf zero */
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_BUF_IDX,
|
|
+ 0x10000ull);
|
|
+
|
|
+ for (bytes_xfered = 0; bytes_xfered < data_len;) {
|
|
+ if (smi->consumed >= smi->length) {
|
|
+ if (!sg_miter_next(smi))
|
|
+ break;
|
|
+ smi->consumed = 0;
|
|
+ }
|
|
+
|
|
+ while (smi->consumed < smi->length &&
|
|
+ shift >= 0) {
|
|
+
|
|
+ dat |= (u64)(((u8 *)(smi->addr))
|
|
+ [smi->consumed]) << shift;
|
|
+ bytes_xfered++;
|
|
+ smi->consumed++;
|
|
+ shift -= 8;
|
|
+ }
|
|
+ if (shift < 0) {
|
|
+ cvmx_write_csr(host->base +
|
|
+ OCT_MIO_EMM_BUF_DAT, dat);
|
|
+ shift = 56;
|
|
+ dat = 0;
|
|
+ }
|
|
+ }
|
|
+ sg_miter_stop(smi);
|
|
+ }
|
|
+ if (cmd->data->timeout_ns) {
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
|
|
+ octeon_mmc_timeout_to_wdog(slot,
|
|
+ cmd->data->timeout_ns));
|
|
+ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
|
|
+ cvmx_read_csr(host->base +
|
|
+ OCT_MIO_EMM_WDOG));
|
|
+ }
|
|
+ } else {
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
|
|
+ ((u64)slot->clock * 850ull) / 1000ull);
|
|
+ octeon_mmc_dbg("OCT_MIO_EMM_WDOG %llu\n",
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_WDOG));
|
|
+ }
|
|
+ /* Clear the bit. */
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, emm_int.u64);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT_EN, emm_int.u64);
|
|
+ host->dma_active = false;
|
|
+
|
|
+ emm_cmd.u64 = 0;
|
|
+ emm_cmd.s.cmd_val = 1;
|
|
+ emm_cmd.s.ctype_xor = mods.ctype_xor;
|
|
+ emm_cmd.s.rtype_xor = mods.rtype_xor;
|
|
+ if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
|
|
+ emm_cmd.s.offset = 64 -
|
|
+ ((cmd->data->blksz * cmd->data->blocks) / 8);
|
|
+ emm_cmd.s.bus_id = slot->bus_id;
|
|
+ emm_cmd.s.cmd_idx = cmd->opcode;
|
|
+ emm_cmd.s.arg = cmd->arg;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK, 0);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_CMD, emm_cmd.u64);
|
|
+ octeon_mmc_dbg("MIO_EMM_CMD: %llx\n", emm_cmd.u64);
|
|
+}
|
|
+
|
|
+static void octeon_mmc_reset_bus(struct octeon_mmc_slot *slot, int preserve)
|
|
+{
|
|
+ union cvmx_mio_emm_cfg emm_cfg;
|
|
+ union cvmx_mio_emm_switch emm_switch;
|
|
+ u64 wdog = 0;
|
|
+
|
|
+ emm_cfg.u64 = cvmx_read_csr(slot->host->base + OCT_MIO_EMM_CFG);
|
|
+ if (preserve) {
|
|
+ emm_switch.u64 = cvmx_read_csr(slot->host->base +
|
|
+ OCT_MIO_EMM_SWITCH);
|
|
+ wdog = cvmx_read_csr(slot->host->base + OCT_MIO_EMM_WDOG);
|
|
+ }
|
|
+
|
|
+ /* Restore switch settings */
|
|
+ if (preserve) {
|
|
+ emm_switch.s.switch_exe = 0;
|
|
+ emm_switch.s.switch_err0 = 0;
|
|
+ emm_switch.s.switch_err1 = 0;
|
|
+ emm_switch.s.switch_err2 = 0;
|
|
+ emm_switch.s.bus_id = 0;
|
|
+ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_SWITCH,
|
|
+ emm_switch.u64);
|
|
+ emm_switch.s.bus_id = slot->bus_id;
|
|
+ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_SWITCH,
|
|
+ emm_switch.u64);
|
|
+
|
|
+ slot->cached_switch = emm_switch.u64;
|
|
+
|
|
+ msleep(10);
|
|
+ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_WDOG, wdog);
|
|
+ } else {
|
|
+ slot->cached_switch = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void octeon_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
+{
|
|
+ struct octeon_mmc_slot *slot;
|
|
+ struct octeon_mmc_host *host;
|
|
+ int bus_width;
|
|
+ int clock;
|
|
+ bool ddr_clock;
|
|
+ int hs_timing;
|
|
+ int power_class = 10;
|
|
+ int clk_period;
|
|
+ int timeout = 2000;
|
|
+ union cvmx_mio_emm_switch emm_switch;
|
|
+ union cvmx_mio_emm_rsp_sts emm_sts;
|
|
+
|
|
+ slot = mmc_priv(mmc);
|
|
+ host = slot->host;
|
|
+
|
|
+ /* Only a single user of the bootbus at a time. */
|
|
+ octeon_mmc_acquire_bus(host);
|
|
+
|
|
+ octeon_mmc_switch_to(slot);
|
|
+
|
|
+ octeon_mmc_dbg("Calling set_ios: slot: clk = 0x%x, bus_width = %d\n",
|
|
+ slot->clock, slot->bus_width);
|
|
+ octeon_mmc_dbg("Calling set_ios: ios: clk = 0x%x, vdd = %u, bus_width = %u, power_mode = %u, timing = %u\n",
|
|
+ ios->clock, ios->vdd, ios->bus_width, ios->power_mode,
|
|
+ ios->timing);
|
|
+ octeon_mmc_dbg("Calling set_ios: mmc: caps = 0x%x, bus_width = %d\n",
|
|
+ mmc->caps, mmc->ios.bus_width);
|
|
+
|
|
+ /*
|
|
+ * Reset the chip on each power off
|
|
+ */
|
|
+ if (ios->power_mode == MMC_POWER_OFF) {
|
|
+ octeon_mmc_reset_bus(slot, 1);
|
|
+ if (slot->pwr_gpio >= 0)
|
|
+ gpio_set_value_cansleep(slot->pwr_gpio,
|
|
+ slot->pwr_gpio_low);
|
|
+ } else {
|
|
+ if (slot->pwr_gpio >= 0)
|
|
+ gpio_set_value_cansleep(slot->pwr_gpio,
|
|
+ !slot->pwr_gpio_low);
|
|
+ }
|
|
+
|
|
+ switch (ios->bus_width) {
|
|
+ case MMC_BUS_WIDTH_8:
|
|
+ bus_width = 2;
|
|
+ break;
|
|
+ case MMC_BUS_WIDTH_4:
|
|
+ bus_width = 1;
|
|
+ break;
|
|
+ case MMC_BUS_WIDTH_1:
|
|
+ bus_width = 0;
|
|
+ break;
|
|
+ default:
|
|
+ octeon_mmc_dbg("unknown bus width %d\n", ios->bus_width);
|
|
+ bus_width = 0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ hs_timing = (ios->timing == MMC_TIMING_MMC_HS);
|
|
+ ddr_clock = (bus_width && ios->timing >= MMC_TIMING_UHS_DDR50);
|
|
+
|
|
+ if (ddr_clock)
|
|
+ bus_width |= 4;
|
|
+
|
|
+ if (ios->clock) {
|
|
+ slot->clock = ios->clock;
|
|
+ slot->bus_width = bus_width;
|
|
+
|
|
+ clock = slot->clock;
|
|
+
|
|
+ if (clock > 52000000)
|
|
+ clock = 52000000;
|
|
+
|
|
+ clk_period = (octeon_get_io_clock_rate() + clock - 1) /
|
|
+ (2 * clock);
|
|
+
|
|
+ /* until clock-renengotiate-on-CRC is in */
|
|
+ if (ddr_clock && ddr > 1)
|
|
+ clk_period *= 2;
|
|
+
|
|
+ emm_switch.u64 = 0;
|
|
+ emm_switch.s.hs_timing = hs_timing;
|
|
+ emm_switch.s.bus_width = bus_width;
|
|
+ emm_switch.s.power_class = power_class;
|
|
+ emm_switch.s.clk_hi = clk_period;
|
|
+ emm_switch.s.clk_lo = clk_period;
|
|
+
|
|
+ if (!octeon_mmc_switch_val_changed(slot, emm_switch.u64)) {
|
|
+ octeon_mmc_dbg("No change from 0x%llx mio_emm_switch, returning.\n",
|
|
+ emm_switch.u64);
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ octeon_mmc_dbg("Writing 0x%llx to mio_emm_wdog\n",
|
|
+ ((u64)clock * 850ull) / 1000ull);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
|
|
+ ((u64)clock * 850ull) / 1000ull);
|
|
+ octeon_mmc_dbg("Writing 0x%llx to mio_emm_switch\n",
|
|
+ emm_switch.u64);
|
|
+
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
|
|
+ emm_switch.s.bus_id = slot->bus_id;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
|
|
+ slot->cached_switch = emm_switch.u64;
|
|
+
|
|
+ do {
|
|
+ emm_sts.u64 =
|
|
+ cvmx_read_csr(host->base + OCT_MIO_EMM_RSP_STS);
|
|
+ if (!emm_sts.s.switch_val)
|
|
+ break;
|
|
+ udelay(100);
|
|
+ } while (timeout-- > 0);
|
|
+
|
|
+ if (timeout <= 0) {
|
|
+ octeon_mmc_dbg("switch command timed out, status=0x%llx\n",
|
|
+ emm_sts.u64);
|
|
+ goto out;
|
|
+ }
|
|
+ }
|
|
+out:
|
|
+ octeon_mmc_release_bus(host);
|
|
+}
|
|
+
|
|
+static int octeon_mmc_get_ro(struct mmc_host *mmc)
|
|
+{
|
|
+ struct octeon_mmc_slot *slot = mmc_priv(mmc);
|
|
+
|
|
+ if (slot->ro_gpio >= 0) {
|
|
+ int pin = gpio_get_value_cansleep(slot->ro_gpio);
|
|
+
|
|
+ if (pin < 0)
|
|
+ return pin;
|
|
+ if (slot->ro_gpio_low)
|
|
+ pin = !pin;
|
|
+ return pin;
|
|
+ } else {
|
|
+ return -ENOSYS;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int octeon_mmc_get_cd(struct mmc_host *mmc)
|
|
+{
|
|
+ struct octeon_mmc_slot *slot = mmc_priv(mmc);
|
|
+
|
|
+ if (slot->cd_gpio >= 0) {
|
|
+ int pin = gpio_get_value_cansleep(slot->cd_gpio);
|
|
+
|
|
+ if (pin < 0)
|
|
+ return pin;
|
|
+ if (slot->cd_gpio_low)
|
|
+ pin = !pin;
|
|
+ return pin;
|
|
+ } else {
|
|
+ return -ENOSYS;
|
|
+ }
|
|
+}
|
|
+
|
|
+static const struct mmc_host_ops octeon_mmc_ops = {
|
|
+ .request = octeon_mmc_request,
|
|
+ .set_ios = octeon_mmc_set_ios,
|
|
+ .get_ro = octeon_mmc_get_ro,
|
|
+ .get_cd = octeon_mmc_get_cd,
|
|
+};
|
|
+
|
|
+static void octeon_mmc_set_clock(struct octeon_mmc_slot *slot,
|
|
+ unsigned int clock)
|
|
+{
|
|
+ struct mmc_host *mmc = slot->mmc;
|
|
+
|
|
+ clock = min(clock, mmc->f_max);
|
|
+ clock = max(clock, mmc->f_min);
|
|
+ slot->clock = clock;
|
|
+}
|
|
+
|
|
+static int octeon_mmc_initlowlevel(struct octeon_mmc_slot *slot,
|
|
+ int bus_width)
|
|
+{
|
|
+ union cvmx_mio_emm_switch emm_switch;
|
|
+ struct octeon_mmc_host *host = slot->host;
|
|
+
|
|
+ host->emm_cfg |= 1ull << slot->bus_id;
|
|
+ cvmx_write_csr(slot->host->base + OCT_MIO_EMM_CFG, host->emm_cfg);
|
|
+ octeon_mmc_set_clock(slot, 400000);
|
|
+
|
|
+ /* Program initial clock speed and power */
|
|
+ emm_switch.u64 = 0;
|
|
+ emm_switch.s.power_class = 10;
|
|
+ emm_switch.s.clk_hi = (slot->sclock / slot->clock) / 2;
|
|
+ emm_switch.s.clk_lo = (slot->sclock / slot->clock) / 2;
|
|
+
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
|
|
+ emm_switch.s.bus_id = slot->bus_id;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_SWITCH, emm_switch.u64);
|
|
+ slot->cached_switch = emm_switch.u64;
|
|
+
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_WDOG,
|
|
+ ((u64)slot->clock * 850ull) / 1000ull);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_STS_MASK, 0xe4f90080ull);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_RCA, 1);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __init octeon_init_slot(struct octeon_mmc_host *host, int id,
|
|
+ int bus_width, int max_freq,
|
|
+ int ro_gpio, int cd_gpio, int pwr_gpio,
|
|
+ bool ro_low, bool cd_low, bool power_low,
|
|
+ u32 cmd_skew, u32 dat_skew)
|
|
+{
|
|
+ struct mmc_host *mmc;
|
|
+ struct octeon_mmc_slot *slot;
|
|
+ u64 clock_period;
|
|
+ int ret;
|
|
+
|
|
+ /*
|
|
+ * Allocate MMC structue
|
|
+ */
|
|
+ mmc = mmc_alloc_host(sizeof(struct octeon_mmc_slot), &host->pdev->dev);
|
|
+ if (!mmc) {
|
|
+ dev_err(&host->pdev->dev, "alloc host failed\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ slot = mmc_priv(mmc);
|
|
+ slot->mmc = mmc;
|
|
+ slot->host = host;
|
|
+ slot->ro_gpio = ro_gpio;
|
|
+ slot->cd_gpio = cd_gpio;
|
|
+ slot->pwr_gpio = pwr_gpio;
|
|
+ slot->ro_gpio_low = ro_low;
|
|
+ slot->cd_gpio_low = cd_low;
|
|
+ slot->pwr_gpio_low = power_low;
|
|
+
|
|
+ if (slot->ro_gpio >= 0) {
|
|
+ ret = gpio_request(slot->ro_gpio, "mmc_ro");
|
|
+ if (ret) {
|
|
+ dev_err(&host->pdev->dev,
|
|
+ "Could not request mmc_ro GPIO %d\n",
|
|
+ slot->ro_gpio);
|
|
+ return ret;
|
|
+ }
|
|
+ gpio_direction_input(slot->ro_gpio);
|
|
+ }
|
|
+ if (slot->cd_gpio >= 0) {
|
|
+ ret = gpio_request(slot->cd_gpio, "mmc_card_detect");
|
|
+ if (ret) {
|
|
+ if (slot->ro_gpio >= 0)
|
|
+ gpio_free(slot->ro_gpio);
|
|
+ dev_err(&host->pdev->dev, "Could not request mmc_card_detect GPIO %d\n",
|
|
+ slot->cd_gpio);
|
|
+ return ret;
|
|
+ }
|
|
+ gpio_direction_input(slot->cd_gpio);
|
|
+ }
|
|
+ if (slot->pwr_gpio >= 0) {
|
|
+ ret = gpio_request(slot->pwr_gpio, "mmc_power");
|
|
+ if (ret) {
|
|
+ dev_err(&host->pdev->dev,
|
|
+ "Could not request mmc_power GPIO %d\n",
|
|
+ slot->pwr_gpio);
|
|
+ if (slot->ro_gpio >= 0)
|
|
+ gpio_free(slot->ro_gpio);
|
|
+ if (slot->cd_gpio)
|
|
+ gpio_free(slot->cd_gpio);
|
|
+ return ret;
|
|
+ }
|
|
+ octeon_mmc_dbg("%s: Shutting off power to slot %d via gpio %d\n",
|
|
+ DRV_NAME, slot->bus_id, slot->pwr_gpio);
|
|
+ gpio_direction_output(slot->pwr_gpio,
|
|
+ slot->pwr_gpio_low);
|
|
+ }
|
|
+ /*
|
|
+ * Set up host parameters.
|
|
+ */
|
|
+ mmc->ops = &octeon_mmc_ops;
|
|
+ mmc->f_min = 400000;
|
|
+ mmc->f_max = max_freq;
|
|
+ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
|
|
+ MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
|
|
+ MMC_CAP_ERASE;
|
|
+ mmc->ocr_avail = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 |
|
|
+ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
|
|
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36;
|
|
+
|
|
+ /* post-sdk23 caps */
|
|
+ mmc->caps |=
|
|
+ ((mmc->f_max >= 12000000) * MMC_CAP_UHS_SDR12) |
|
|
+ ((mmc->f_max >= 25000000) * MMC_CAP_UHS_SDR25) |
|
|
+ ((mmc->f_max >= 50000000) * MMC_CAP_UHS_SDR50) |
|
|
+ MMC_CAP_CMD23;
|
|
+
|
|
+ if (host->global_pwr_gpio >= 0)
|
|
+ mmc->caps |= MMC_CAP_POWER_OFF_CARD;
|
|
+
|
|
+ /* "1.8v" capability is actually 1.8-or-3.3v */
|
|
+ if (ddr)
|
|
+ mmc->caps |= MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR;
|
|
+
|
|
+ mmc->max_segs = 64;
|
|
+ mmc->max_seg_size = host->linear_buf_size;
|
|
+ mmc->max_req_size = host->linear_buf_size;
|
|
+ mmc->max_blk_size = 512;
|
|
+ mmc->max_blk_count = mmc->max_req_size / 512;
|
|
+
|
|
+ slot->clock = mmc->f_min;
|
|
+ slot->sclock = octeon_get_io_clock_rate();
|
|
+
|
|
+ clock_period = 1000000000000ull / slot->sclock; /* period in pS */
|
|
+ slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
|
|
+ slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
|
|
+
|
|
+ slot->bus_width = bus_width;
|
|
+ slot->bus_id = id;
|
|
+ slot->cached_rca = 1;
|
|
+
|
|
+ /* Only a single user of the bootbus at a time. */
|
|
+ octeon_mmc_acquire_bus(host);
|
|
+ host->slot[id] = slot;
|
|
+
|
|
+ octeon_mmc_switch_to(slot);
|
|
+ /* Initialize MMC Block. */
|
|
+ octeon_mmc_initlowlevel(slot, bus_width);
|
|
+
|
|
+ octeon_mmc_release_bus(host);
|
|
+
|
|
+ ret = mmc_add_host(mmc);
|
|
+ octeon_mmc_dbg("mmc_add_host returned %d\n", ret);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int octeon_mmc_probe(struct platform_device *pdev)
|
|
+{
|
|
+ union cvmx_mio_emm_cfg emm_cfg;
|
|
+ struct octeon_mmc_host *host;
|
|
+ struct resource *res;
|
|
+ void __iomem *base;
|
|
+ int mmc_irq[9];
|
|
+ int i;
|
|
+ int ret = 0;
|
|
+ struct device_node *node = pdev->dev.of_node;
|
|
+ bool cn78xx_style;
|
|
+ u64 t;
|
|
+ enum of_gpio_flags f;
|
|
+
|
|
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
|
|
+ if (!host)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ spin_lock_init(&host->irq_handler_lock);
|
|
+ sema_init(&host->mmc_serializer, 1);
|
|
+
|
|
+ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-mmc");
|
|
+ if (cn78xx_style) {
|
|
+ host->need_bootbus_lock = false;
|
|
+ host->big_dma_addr = true;
|
|
+ host->need_irq_handler_lock = true;
|
|
+ /*
|
|
+ * First seven are the EMM_INT bits 0..6, then two for
|
|
+ * the EMM_DMA_INT bits
|
|
+ */
|
|
+ for (i = 0; i < 9; i++) {
|
|
+ mmc_irq[i] = platform_get_irq(pdev, i);
|
|
+ if (mmc_irq[i] < 0)
|
|
+ return mmc_irq[i];
|
|
+ }
|
|
+ } else {
|
|
+ host->need_bootbus_lock = true;
|
|
+ host->big_dma_addr = false;
|
|
+ host->need_irq_handler_lock = false;
|
|
+ /* First one is EMM second NDF_DMA */
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ mmc_irq[i] = platform_get_irq(pdev, i);
|
|
+ if (mmc_irq[i] < 0)
|
|
+ return mmc_irq[i];
|
|
+ }
|
|
+ }
|
|
+ host->last_slot = -1;
|
|
+
|
|
+ if (bb_size < 512 || bb_size >= (1 << 24))
|
|
+ bb_size = 1 << 16;
|
|
+ host->linear_buf_size = bb_size;
|
|
+ host->linear_buf = devm_kzalloc(&pdev->dev, host->linear_buf_size,
|
|
+ GFP_KERNEL);
|
|
+
|
|
+ if (!host->linear_buf) {
|
|
+ dev_err(&pdev->dev, "devm_kzalloc failed\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ host->pdev = pdev;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res) {
|
|
+ dev_err(&pdev->dev, "Platform resource[0] is missing\n");
|
|
+ return -ENXIO;
|
|
+ }
|
|
+ base = devm_ioremap_resource(&pdev->dev, res);
|
|
+ if (IS_ERR(base))
|
|
+ return PTR_ERR(base);
|
|
+ host->base = (u64)base;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+ if (!res) {
|
|
+ dev_err(&pdev->dev, "Platform resource[1] is missing\n");
|
|
+ ret = -EINVAL;
|
|
+ goto err;
|
|
+ }
|
|
+ base = devm_ioremap_resource(&pdev->dev, res);
|
|
+ if (IS_ERR(base)) {
|
|
+ ret = PTR_ERR(base);
|
|
+ goto err;
|
|
+ }
|
|
+ host->ndf_base = (u64)base;
|
|
+ /*
|
|
+ * Clear out any pending interrupts that may be left over from
|
|
+ * bootloader.
|
|
+ */
|
|
+ t = cvmx_read_csr(host->base + OCT_MIO_EMM_INT);
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_INT, t);
|
|
+ if (cn78xx_style) {
|
|
+ /* Only CMD_DONE, DMA_DONE, CMD_ERR, DMA_ERR */
|
|
+ for (i = 1; i <= 4; i++) {
|
|
+ ret = devm_request_irq(&pdev->dev, mmc_irq[i],
|
|
+ octeon_mmc_interrupt,
|
|
+ 0, DRV_NAME, host);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
|
|
+ mmc_irq[i]);
|
|
+ goto err;
|
|
+ }
|
|
+ }
|
|
+ } else {
|
|
+ ret = devm_request_irq(&pdev->dev, mmc_irq[0],
|
|
+ octeon_mmc_interrupt, 0, DRV_NAME, host);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "Error: devm_request_irq %d\n",
|
|
+ mmc_irq[0]);
|
|
+ goto err;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ ret = of_get_named_gpio_flags(node, "power-gpios", 0, &f);
|
|
+ if (ret == -EPROBE_DEFER)
|
|
+ goto err;
|
|
+
|
|
+ host->global_pwr_gpio = ret;
|
|
+ host->global_pwr_gpio_low =
|
|
+ (host->global_pwr_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
|
|
+
|
|
+ if (host->global_pwr_gpio >= 0) {
|
|
+ ret = gpio_request(host->global_pwr_gpio, "mmc global power");
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev,
|
|
+ "Could not request mmc global power gpio %d\n",
|
|
+ host->global_pwr_gpio);
|
|
+ goto err;
|
|
+ }
|
|
+ dev_dbg(&pdev->dev, "Global power on\n");
|
|
+ gpio_direction_output(host->global_pwr_gpio,
|
|
+ !host->global_pwr_gpio_low);
|
|
+ }
|
|
+
|
|
+ platform_set_drvdata(pdev, host);
|
|
+
|
|
+ for_each_child_of_node(pdev->dev.of_node, node) {
|
|
+
|
|
+ int r;
|
|
+ u32 slot;
|
|
+ int ro_gpio, cd_gpio, pwr_gpio;
|
|
+ bool ro_low, cd_low, pwr_low;
|
|
+ u32 bus_width, max_freq, cmd_skew, dat_skew;
|
|
+
|
|
+ if (!of_device_is_compatible(node,
|
|
+ "cavium,octeon-6130-mmc-slot")) {
|
|
+ pr_warn("Sub node isn't slot: %s\n",
|
|
+ of_node_full_name(node));
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ if (of_property_read_u32(node, "reg", &slot) != 0) {
|
|
+ pr_warn("Missing or invalid reg property on %s\n",
|
|
+ of_node_full_name(node));
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ r = of_property_read_u32(node, "cavium,bus-max-width",
|
|
+ &bus_width);
|
|
+ if (r) {
|
|
+ bus_width = 8;
|
|
+ pr_info("Bus width not found for slot %d, defaulting to %d\n",
|
|
+ slot, bus_width);
|
|
+ } else {
|
|
+ switch (bus_width) {
|
|
+ case 1:
|
|
+ case 4:
|
|
+ case 8:
|
|
+ break;
|
|
+ default:
|
|
+ pr_warn("Invalid bus width property for slot %d\n",
|
|
+ slot);
|
|
+ continue;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ r = of_property_read_u32(node, "cavium,cmd-clk-skew",
|
|
+ &cmd_skew);
|
|
+ if (r)
|
|
+ cmd_skew = 0;
|
|
+
|
|
+ r = of_property_read_u32(node, "cavium,dat-clk-skew",
|
|
+ &dat_skew);
|
|
+ if (r)
|
|
+ dat_skew = 0;
|
|
+
|
|
+ r = of_property_read_u32(node, "spi-max-frequency", &max_freq);
|
|
+ if (r) {
|
|
+ max_freq = 52000000;
|
|
+ pr_info("No spi-max-frequency for slot %d, defaulting to %d\n",
|
|
+ slot, max_freq);
|
|
+ }
|
|
+
|
|
+ ro_gpio = of_get_named_gpio_flags(node, "wp-gpios", 0, &f);
|
|
+ ro_low = (ro_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
|
|
+ cd_gpio = of_get_named_gpio_flags(node, "cd-gpios", 0, &f);
|
|
+ cd_low = (cd_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
|
|
+ pwr_gpio = of_get_named_gpio_flags(node, "power-gpios", 0, &f);
|
|
+ pwr_low = (pwr_gpio >= 0 && f == OF_GPIO_ACTIVE_LOW);
|
|
+
|
|
+ ret = octeon_init_slot(host, slot, bus_width, max_freq,
|
|
+ ro_gpio, cd_gpio, pwr_gpio,
|
|
+ ro_low, cd_low, pwr_low,
|
|
+ cmd_skew, dat_skew);
|
|
+ octeon_mmc_dbg("init slot %d, ret = %d\n", slot, ret);
|
|
+ if (ret)
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+
|
|
+err:
|
|
+ dev_err(&pdev->dev, "Probe failed: %d\n", ret);
|
|
+
|
|
+ /* Disable MMC controller */
|
|
+ emm_cfg.s.bus_ena = 0;
|
|
+ cvmx_write_csr(host->base + OCT_MIO_EMM_CFG, emm_cfg.u64);
|
|
+
|
|
+ if (host->global_pwr_gpio >= 0) {
|
|
+ dev_dbg(&pdev->dev, "Global power off\n");
|
|
+ gpio_set_value_cansleep(host->global_pwr_gpio,
|
|
+ host->global_pwr_gpio_low);
|
|
+ gpio_free(host->global_pwr_gpio);
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int octeon_mmc_remove(struct platform_device *pdev)
|
|
+{
|
|
+ union cvmx_mio_ndf_dma_cfg ndf_dma_cfg;
|
|
+ struct octeon_mmc_host *host = platform_get_drvdata(pdev);
|
|
+ struct octeon_mmc_slot *slot;
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ if (host) {
|
|
+ int i;
|
|
+
|
|
+ /* quench all users */
|
|
+ for (i = 0; i < OCTEON_MAX_MMC; i++) {
|
|
+ slot = host->slot[i];
|
|
+ if (slot)
|
|
+ mmc_remove_host(slot->mmc);
|
|
+ }
|
|
+
|
|
+ /* Reset bus_id */
|
|
+ ndf_dma_cfg.u64 =
|
|
+ cvmx_read_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG);
|
|
+ ndf_dma_cfg.s.en = 0;
|
|
+ cvmx_write_csr(host->ndf_base + OCT_MIO_NDF_DMA_CFG,
|
|
+ ndf_dma_cfg.u64);
|
|
+
|
|
+ for (i = 0; i < OCTEON_MAX_MMC; i++) {
|
|
+ struct octeon_mmc_slot *slot;
|
|
+
|
|
+ slot = host->slot[i];
|
|
+ if (!slot)
|
|
+ continue;
|
|
+ /* Free the GPIOs */
|
|
+ if (slot->ro_gpio >= 0)
|
|
+ gpio_free(slot->ro_gpio);
|
|
+ if (slot->cd_gpio >= 0)
|
|
+ gpio_free(slot->cd_gpio);
|
|
+ if (slot->pwr_gpio >= 0) {
|
|
+ gpio_set_value_cansleep(slot->pwr_gpio,
|
|
+ slot->pwr_gpio_low);
|
|
+ gpio_free(slot->pwr_gpio);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (host->global_pwr_gpio >= 0) {
|
|
+ dev_dbg(&pdev->dev, "Global power off\n");
|
|
+ gpio_set_value_cansleep(host->global_pwr_gpio,
|
|
+ host->global_pwr_gpio_low);
|
|
+ gpio_free(host->global_pwr_gpio);
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < OCTEON_MAX_MMC; i++) {
|
|
+ slot = host->slot[i];
|
|
+ if (slot)
|
|
+ mmc_free_host(slot->mmc);
|
|
+ }
|
|
+
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct of_device_id octeon_mmc_match[] = {
|
|
+ {
|
|
+ .compatible = "cavium,octeon-6130-mmc",
|
|
+ },
|
|
+ {
|
|
+ .compatible = "cavium,octeon-7890-mmc",
|
|
+ },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, octeon_mmc_match);
|
|
+
|
|
+static struct platform_driver octeon_mmc_driver = {
|
|
+ .probe = octeon_mmc_probe,
|
|
+ .remove = octeon_mmc_remove,
|
|
+ .driver = {
|
|
+ .name = DRV_NAME,
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = octeon_mmc_match,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init octeon_mmc_init(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ octeon_mmc_dbg("calling octeon_mmc_init\n");
|
|
+
|
|
+ ret = platform_driver_register(&octeon_mmc_driver);
|
|
+ octeon_mmc_dbg("driver probe returned %d\n", ret);
|
|
+
|
|
+ if (ret)
|
|
+ pr_err("%s: Failed to register driver\n", DRV_NAME);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void __exit octeon_mmc_cleanup(void)
|
|
+{
|
|
+ /* Unregister MMC driver */
|
|
+ platform_driver_unregister(&octeon_mmc_driver);
|
|
+}
|
|
+
|
|
+module_init(octeon_mmc_init);
|
|
+module_exit(octeon_mmc_cleanup);
|
|
+
|
|
+MODULE_AUTHOR("Cavium Inc. <support@cavium.com>");
|
|
+MODULE_DESCRIPTION("low-level driver for Cavium OCTEON MMC/SSD card");
|
|
+MODULE_LICENSE("GPL");
|
|
|