You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
107 lines
2.8 KiB
107 lines
2.8 KiB
From ac8fcc92d87436715ce85f39a4fe4f07c3bfa15e Mon Sep 17 00:00:00 2001
|
|
From: Luis Araneda <luaraneda@gmail.com>
|
|
Date: Sun, 22 Jul 2018 02:52:41 -0400
|
|
Subject: [U-Boot] [RFC PATCH] arm: zynq: read mac address from SPI flash memory
|
|
|
|
Implement a method for reading the MAC address from an
|
|
SPI flash memory.
|
|
In particular, this method is used by the Zybo Z7 board
|
|
to read the MAC address from the OTP region in the SPI NOR
|
|
memory
|
|
|
|
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
|
|
---
|
|
As of 2018-08-23, this patch has been sent to U-Boot's mailing list
|
|
and is being reviewed. Some changes on the implementation are expected,
|
|
but the functionality should not change
|
|
---
|
|
board/xilinx/zynq/board.c | 28 ++++++++++++++++++++++++++++
|
|
configs/zynq_zybo_z7_defconfig | 3 +++
|
|
drivers/misc/Kconfig | 17 +++++++++++++++++
|
|
3 files changed, 48 insertions(+)
|
|
|
|
--- a/board/xilinx/zynq/board.c
|
|
+++ b/board/xilinx/zynq/board.c
|
|
@@ -6,9 +6,12 @@
|
|
|
|
#include <common.h>
|
|
#include <dm/uclass.h>
|
|
+#include <dm/device.h>
|
|
+#include <dm/device-internal.h>
|
|
#include <fdtdec.h>
|
|
#include <fpga.h>
|
|
#include <mmc.h>
|
|
+#include <spi_flash.h>
|
|
#include <watchdog.h>
|
|
#include <wdt.h>
|
|
#include <zynqpl.h>
|
|
@@ -83,6 +86,31 @@ int zynq_board_read_rom_ethaddr(unsigned
|
|
printf("I2C EEPROM MAC address read failed\n");
|
|
#endif
|
|
|
|
+#if defined(CONFIG_MAC_ADDR_IN_SPI_FLASH)
|
|
+ struct spi_flash *flash;
|
|
+ struct udevice *dev;
|
|
+ int ret;
|
|
+
|
|
+ ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
|
|
+ CONFIG_SF_DEFAULT_CS,
|
|
+ 0, 0, &dev);
|
|
+ if (ret) {
|
|
+ printf("SPI(bus:%u cs:%u) probe failed\n",
|
|
+ CONFIG_SF_DEFAULT_BUS,
|
|
+ CONFIG_SF_DEFAULT_CS);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ flash = dev_get_uclass_priv(dev);
|
|
+ flash->read_cmd = CONFIG_MAC_ADDR_SPI_FLASH_READ_CMD;
|
|
+
|
|
+ if (spi_flash_read_dm(dev,
|
|
+ CONFIG_MAC_ADDR_SPI_FLASH_DATA_OFFSET,
|
|
+ 6, ethaddr))
|
|
+ printf("SPI MAC address read failed\n");
|
|
+
|
|
+ device_remove(dev, DM_REMOVE_NORMAL);
|
|
+#endif
|
|
return 0;
|
|
}
|
|
|
|
--- a/configs/zynq_zybo_z7_defconfig
|
|
+++ b/configs/zynq_zybo_z7_defconfig
|
|
@@ -44,6 +44,9 @@ CONFIG_DM_GPIO=y
|
|
CONFIG_SYS_I2C_ZYNQ=y
|
|
CONFIG_ZYNQ_I2C0=y
|
|
CONFIG_ZYNQ_I2C1=y
|
|
+CONFIG_MAC_ADDR_IN_SPI_FLASH=y
|
|
+CONFIG_MAC_ADDR_SPI_FLASH_READ_CMD=0x4b
|
|
+CONFIG_MAC_ADDR_SPI_FLASH_DATA_OFFSET=0x20
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_ZYNQ=y
|
|
CONFIG_SPI_FLASH=y
|
|
--- a/drivers/misc/Kconfig
|
|
+++ b/drivers/misc/Kconfig
|
|
@@ -272,6 +272,23 @@ config SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
|
|
endif
|
|
|
|
+config MAC_ADDR_IN_SPI_FLASH
|
|
+ bool "MAC address in SPI flash"
|
|
+ help
|
|
+ Read MAC address from an SPI flash memory
|
|
+
|
|
+if MAC_ADDR_IN_SPI_FLASH
|
|
+
|
|
+config MAC_ADDR_SPI_FLASH_READ_CMD
|
|
+ hex "Read command for the SPI flash memory"
|
|
+ default 0
|
|
+
|
|
+config MAC_ADDR_SPI_FLASH_DATA_OFFSET
|
|
+ hex "Offset of MAC data in SPI flash memory"
|
|
+ default 0
|
|
+
|
|
+endif
|
|
+
|
|
config GDSYS_RXAUI_CTRL
|
|
bool "Enable gdsys RXAUI control driver"
|
|
depends on MISC
|
|
|