You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

David Bauer c4931713df ath79: add support for OCEDO Koala ... This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>		6 years ago
..
apex	ixp4xx: put apex images into image staging directory	8 years ago
arm-trusted-firmware-sunxi	arm-trusted-firmware-sunxi: update to version from 2018-02-10	7 years ago
at91bootstrap	at91: Add SAMA5D2 PTC EK board	7 years ago
fconfig	treewide: clean up download hashes	8 years ago
grub2	grub2: fix packed-not-aligned error on GCC 8	6 years ago
imx-bootlets	treewide: clean up download hashes	8 years ago
kexec-tools	kexec-tools: bump version to 2.0.16	7 years ago
kobs-ng	kobs-ng: add header for integer definitions	7 years ago
rbcfg	rbcfg: Implement CPU frequency control	7 years ago
uboot-ar71xx	uboot-ar71xx: fix build error	8 years ago
uboot-at91	at91: Add SAMA5D2 PTC EK board	7 years ago
uboot-envtools	ath79: add support for OCEDO Koala	6 years ago
uboot-fritz4040	ipq40xx: add target	7 years ago
uboot-imx6	uboot-imx: bump to 2018.03 which fixes the build issues with fdt64_t redefinitions	6 years ago
uboot-kirkwood	uboot-kirkwood: fix malformed boot configuration	6 years ago
uboot-lantiq	lantiq: rename gphy firmware	7 years ago
uboot-layerscape	layerscape: support ubifs rootfs in u-boot env	7 years ago
uboot-layerscape-armv8_32b	layerscape: support ubifs rootfs in u-boot env	7 years ago
uboot-mvebu	uboot-mvebu: fix build on hosts lacking pkg-config	7 years ago
uboot-mxs	uboot-mxs: fix build on hosts lacking pkg-config	7 years ago
uboot-omap	omap: rename image for sysupgrade compatibility	6 years ago
uboot-oxnas	uboot-oxnas: fix typo accidentally committed during oxnas reboot	7 years ago
uboot-sunxi	sunxi: Added support for Xunlong Orange Pi PC2	6 years ago
uboot-xburst	treewide: clean up download hashes	8 years ago
uboot-zynq	uboot-zynq: update to 2017.03	7 years ago
yamonenv	packages: mark packages depending on a target as nonshared	8 years ago