You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape...

572 lines
17 KiB

From 6ca94d2e7dc72b21703e6d9be4e8ec3ad4a26f41 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 17 Apr 2019 18:59:02 +0800
Subject: [PATCH] sdhc: support layerscape
This is an integrated patch of sdhc for layerscape
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
drivers/mmc/core/mmc.c | 3 +
drivers/mmc/host/sdhci-esdhc.h | 25 +++
drivers/mmc/host/sdhci-of-esdhc.c | 270 ++++++++++++++++++++++++++----
drivers/mmc/host/sdhci.c | 9 +-
drivers/mmc/host/sdhci.h | 1 +
include/linux/mmc/card.h | 1 +
include/linux/mmc/host.h | 2 +
7 files changed, 272 insertions(+), 39 deletions(-)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1174,6 +1174,9 @@ static int mmc_select_hs400(struct mmc_c
goto out_err;
/* Switch card to DDR */
+ if (host->ops->prepare_ddr_to_hs400)
+ host->ops->prepare_ddr_to_hs400(host);
+
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
EXT_CSD_DDR_BUS_WIDTH_8,
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -59,7 +59,32 @@
/* Tuning Block Control Register */
#define ESDHC_TBCTL 0x120
+#define ESDHC_HS400_WNDW_ADJUST 0x00000040
+#define ESDHC_HS400_MODE 0x00000010
#define ESDHC_TB_EN 0x00000004
+#define ESDHC_TBPTR 0x128
+
+/* SD Clock Control Register */
+#define ESDHC_SDCLKCTL 0x144
+#define ESDHC_LPBK_CLK_SEL 0x80000000
+#define ESDHC_CMD_CLK_CTL 0x00008000
+
+/* SD Timing Control Register */
+#define ESDHC_SDTIMNGCTL 0x148
+#define ESDHC_FLW_CTL_BG 0x00008000
+
+/* DLL Config 0 Register */
+#define ESDHC_DLLCFG0 0x160
+#define ESDHC_DLL_ENABLE 0x80000000
+#define ESDHC_DLL_FREQ_SEL 0x08000000
+
+/* DLL Config 1 Register */
+#define ESDHC_DLLCFG1 0x164
+#define ESDHC_DLL_PD_PULSE_STRETCH_SEL 0x80000000
+
+/* DLL Status 0 Register */
+#define ESDHC_DLLSTAT0 0x170
+#define ESDHC_DLL_STS_SLV_LOCK 0x08000000
/* Control Register for DMA transfer */
#define ESDHC_DMA_SYSCTL 0x40c
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -30,11 +30,61 @@
#define VENDOR_V_22 0x12
#define VENDOR_V_23 0x13
+#define MMC_TIMING_NUM (MMC_TIMING_MMC_HS400 + 1)
+
+struct esdhc_clk_fixup {
+ const unsigned int sd_dflt_max_clk;
+ const unsigned int max_clk[MMC_TIMING_NUM];
+};
+
+static const struct esdhc_clk_fixup ls1021a_esdhc_clk = {
+ .sd_dflt_max_clk = 25000000,
+ .max_clk[MMC_TIMING_MMC_HS] = 46500000,
+ .max_clk[MMC_TIMING_SD_HS] = 46500000,
+};
+
+static const struct esdhc_clk_fixup ls1046a_esdhc_clk = {
+ .sd_dflt_max_clk = 25000000,
+ .max_clk[MMC_TIMING_UHS_SDR104] = 167000000,
+ .max_clk[MMC_TIMING_MMC_HS200] = 167000000,
+};
+
+static const struct esdhc_clk_fixup ls1012a_esdhc_clk = {
+ .sd_dflt_max_clk = 25000000,
+ .max_clk[MMC_TIMING_UHS_SDR104] = 125000000,
+ .max_clk[MMC_TIMING_MMC_HS200] = 125000000,
+};
+
+static const struct esdhc_clk_fixup p1010_esdhc_clk = {
+ .sd_dflt_max_clk = 20000000,
+ .max_clk[MMC_TIMING_LEGACY] = 20000000,
+ .max_clk[MMC_TIMING_MMC_HS] = 42000000,
+ .max_clk[MMC_TIMING_SD_HS] = 40000000,
+};
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+ { .compatible = "fsl,ls1021a-esdhc", .data = &ls1021a_esdhc_clk},
+ { .compatible = "fsl,ls1046a-esdhc", .data = &ls1046a_esdhc_clk},
+ { .compatible = "fsl,ls1012a-esdhc", .data = &ls1012a_esdhc_clk},
+ { .compatible = "fsl,p1010-esdhc", .data = &p1010_esdhc_clk},
+ { .compatible = "fsl,mpc8379-esdhc" },
+ { .compatible = "fsl,mpc8536-esdhc" },
+ { .compatible = "fsl,esdhc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
struct sdhci_esdhc {
u8 vendor_ver;
u8 spec_ver;
bool quirk_incorrect_hostver;
+ bool quirk_limited_clk_division;
+ bool quirk_unreliable_pulse_detection;
+ bool quirk_fixup_tuning;
+ bool quirk_incorrect_delay_chain;
unsigned int peripheral_clock;
+ const struct esdhc_clk_fixup *clk_fixup;
+ u32 div_ratio;
};
/**
@@ -495,13 +545,20 @@ static void esdhc_clock_enable(struct sd
}
}
+static struct soc_device_attribute soc_incorrect_delay_chain[] = {
+ { .family = "QorIQ LX2160A", .revision = "1.0", },
+ { },
+};
+
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
int pre_div = 1;
int div = 1;
+ int division;
ktime_t timeout;
+ long fixup = 0;
u32 temp;
host->mmc->actual_clock = 0;
@@ -515,27 +572,14 @@ static void esdhc_of_set_clock(struct sd
if (esdhc->vendor_ver < VENDOR_V_23)
pre_div = 2;
- /*
- * Limit SD clock to 167MHz for ls1046a according to its datasheet
- */
- if (clock > 167000000 &&
- of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
- clock = 167000000;
+ if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
+ esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+ fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+ else if (esdhc->clk_fixup)
+ fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
- /*
- * Limit SD clock to 125MHz for ls1012a according to its datasheet
- */
- if (clock > 125000000 &&
- of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
- clock = 125000000;
-
- /* Workaround to reduce the clock frequency for p1010 esdhc */
- if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
- if (clock > 20000000)
- clock -= 5000000;
- if (clock > 40000000)
- clock -= 5000000;
- }
+ if (fixup && clock > fixup)
+ clock = fixup;
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
@@ -548,9 +592,30 @@ static void esdhc_of_set_clock(struct sd
while (host->max_clk / pre_div / div > clock && div < 16)
div++;
+ if (esdhc->quirk_limited_clk_division &&
+ clock == MMC_HS200_MAX_DTR &&
+ (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 ||
+ host->flags & SDHCI_HS400_TUNING)) {
+ division = pre_div * div;
+ if (division <= 4) {
+ pre_div = 4;
+ div = 1;
+ } else if (division <= 8) {
+ pre_div = 4;
+ div = 2;
+ } else if (division <= 12) {
+ pre_div = 4;
+ div = 3;
+ } else {
+ pr_warn("%s: using upsupported clock division.\n",
+ mmc_hostname(host->mmc));
+ }
+ }
+
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->max_clk / pre_div / div);
host->mmc->actual_clock = host->max_clk / pre_div / div;
+ esdhc->div_ratio = pre_div * div;
pre_div >>= 1;
div--;
@@ -560,6 +625,29 @@ static void esdhc_of_set_clock(struct sd
| (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
+ clock == MMC_HS200_MAX_DTR) {
+ temp = sdhci_readl(host, ESDHC_TBCTL);
+ sdhci_writel(host, temp | ESDHC_HS400_MODE, ESDHC_TBCTL);
+ temp = sdhci_readl(host, ESDHC_SDCLKCTL);
+ sdhci_writel(host, temp | ESDHC_CMD_CLK_CTL, ESDHC_SDCLKCTL);
+ esdhc_clock_enable(host, true);
+
+ temp = sdhci_readl(host, ESDHC_DLLCFG0);
+ temp |= ESDHC_DLL_ENABLE;
+ if (host->mmc->actual_clock == MMC_HS200_MAX_DTR ||
+ esdhc->quirk_incorrect_delay_chain == false)
+ temp |= ESDHC_DLL_FREQ_SEL;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+ temp = sdhci_readl(host, ESDHC_TBCTL);
+ sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
+
+ esdhc_clock_enable(host, false);
+ temp = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ temp |= ESDHC_FLUSH_ASYNC_FIFO;
+ sdhci_writel(host, temp, ESDHC_DMA_SYSCTL);
+ }
+
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
while (1) {
@@ -575,6 +663,7 @@ static void esdhc_of_set_clock(struct sd
udelay(10);
}
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp |= ESDHC_CLOCK_SDCLKEN;
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
}
@@ -603,6 +692,8 @@ static void esdhc_pltfm_set_bus_width(st
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
u32 val;
sdhci_reset(host, mask);
@@ -617,6 +708,12 @@ static void esdhc_reset(struct sdhci_hos
val = sdhci_readl(host, ESDHC_TBCTL);
val &= ~ESDHC_TB_EN;
sdhci_writel(host, val, ESDHC_TBCTL);
+
+ if (esdhc->quirk_unreliable_pulse_detection) {
+ val = sdhci_readl(host, ESDHC_DLLCFG1);
+ val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL;
+ sdhci_writel(host, val, ESDHC_DLLCFG1);
+ }
}
}
@@ -628,6 +725,7 @@ static void esdhc_reset(struct sdhci_hos
static const struct of_device_id scfg_device_ids[] = {
{ .compatible = "fsl,t1040-scfg", },
{ .compatible = "fsl,ls1012a-scfg", },
+ { .compatible = "fsl,ls1043a-scfg", },
{ .compatible = "fsl,ls1046a-scfg", },
{}
};
@@ -690,23 +788,91 @@ static int esdhc_signal_voltage_switch(s
}
}
-static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+static struct soc_device_attribute soc_fixup_tuning[] = {
+ { .family = "QorIQ T1040", .revision = "1.0", },
+ { .family = "QorIQ T2080", .revision = "1.0", },
+ { .family = "QorIQ T1023", .revision = "1.0", },
+ { .family = "QorIQ LS1021A", .revision = "1.0", },
+ { .family = "QorIQ LS1080A", .revision = "1.0", },
+ { .family = "QorIQ LS2080A", .revision = "1.0", },
+ { .family = "QorIQ LS1012A", .revision = "1.0", },
+ { .family = "QorIQ LS1043A", .revision = "1.*", },
+ { .family = "QorIQ LS1046A", .revision = "1.0", },
+ { },
+};
+
+static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable)
{
- struct sdhci_host *host = mmc_priv(mmc);
u32 val;
- /* Use tuning block for tuning procedure */
esdhc_clock_enable(host, false);
+
val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
val |= ESDHC_FLUSH_ASYNC_FIFO;
sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
val = sdhci_readl(host, ESDHC_TBCTL);
- val |= ESDHC_TB_EN;
+ if (enable)
+ val |= ESDHC_TB_EN;
+ else
+ val &= ~ESDHC_TB_EN;
sdhci_writel(host, val, ESDHC_TBCTL);
+
esdhc_clock_enable(host, true);
+}
+
+static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ bool hs400_tuning;
+ u32 val;
+ int ret;
+
+ if (esdhc->quirk_limited_clk_division &&
+ host->flags & SDHCI_HS400_TUNING)
+ esdhc_of_set_clock(host, host->clock);
+
+ esdhc_tuning_block_enable(host, true);
+
+ hs400_tuning = host->flags & SDHCI_HS400_TUNING;
+ ret = sdhci_execute_tuning(mmc, opcode);
+
+ if (hs400_tuning) {
+ val = sdhci_readl(host, ESDHC_SDTIMNGCTL);
+ val |= ESDHC_FLW_CTL_BG;
+ sdhci_writel(host, val, ESDHC_SDTIMNGCTL);
+ }
- return sdhci_execute_tuning(mmc, opcode);
+ if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) {
+
+ /* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and
+ * program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO
+ */
+ val = sdhci_readl(host, ESDHC_TBPTR);
+ val = (val & ~((0x7f << 8) | 0x7f)) |
+ (3 * esdhc->div_ratio) | ((5 * esdhc->div_ratio) << 8);
+ sdhci_writel(host, val, ESDHC_TBPTR);
+
+ /* program the software tuning mode by setting
+ * TBCTL[TB_MODE]=2'h3
+ */
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val |= 0x3;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ sdhci_execute_tuning(mmc, opcode);
+ }
+ return ret;
+}
+
+static void esdhc_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ if (timing == MMC_TIMING_MMC_HS400)
+ esdhc_tuning_block_enable(host, true);
+ else
+ sdhci_set_uhs_signaling(host, timing);
}
#ifdef CONFIG_PM_SLEEP
@@ -755,7 +921,7 @@ static const struct sdhci_ops sdhci_esdh
.adma_workaround = esdhc_of_adma_workaround,
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = esdhc_set_uhs_signaling,
};
static const struct sdhci_ops sdhci_esdhc_le_ops = {
@@ -772,7 +938,7 @@ static const struct sdhci_ops sdhci_esdh
.adma_workaround = esdhc_of_adma_workaround,
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = esdhc_set_uhs_signaling,
};
static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
@@ -798,8 +964,20 @@ static struct soc_device_attribute soc_i
{ },
};
+static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = {
+ { .family = "QorIQ LX2160A", .revision = "1.0", },
+ { .family = "QorIQ LX2160A", .revision = "2.0", },
+ { },
+};
+
+static struct soc_device_attribute soc_unreliable_pulse_detection[] = {
+ { .family = "QorIQ LX2160A", .revision = "1.0", },
+ { },
+};
+
static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
{
+ const struct of_device_id *match;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_esdhc *esdhc;
struct device_node *np;
@@ -819,6 +997,24 @@ static void esdhc_init(struct platform_d
else
esdhc->quirk_incorrect_hostver = false;
+ if (soc_device_match(soc_fixup_sdhc_clkdivs))
+ esdhc->quirk_limited_clk_division = true;
+ else
+ esdhc->quirk_limited_clk_division = false;
+
+ if (soc_device_match(soc_unreliable_pulse_detection))
+ esdhc->quirk_unreliable_pulse_detection = true;
+ else
+ esdhc->quirk_unreliable_pulse_detection = false;
+
+ if (soc_device_match(soc_incorrect_delay_chain))
+ esdhc->quirk_incorrect_delay_chain = true;
+ else
+ esdhc->quirk_incorrect_delay_chain = false;
+
+ match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node);
+ if (match)
+ esdhc->clk_fixup = match->data;
np = pdev->dev.of_node;
clk = of_clk_get(np, 0);
if (!IS_ERR(clk)) {
@@ -846,6 +1042,12 @@ static void esdhc_init(struct platform_d
}
}
+static int esdhc_prepare_ddr_to_hs400(struct mmc_host *mmc)
+{
+ esdhc_tuning_block_enable(mmc_priv(mmc), false);
+ return 0;
+}
+
static int sdhci_esdhc_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
@@ -869,6 +1071,7 @@ static int sdhci_esdhc_probe(struct plat
host->mmc_host_ops.start_signal_voltage_switch =
esdhc_signal_voltage_switch;
host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
+ host->mmc_host_ops.prepare_ddr_to_hs400 = esdhc_prepare_ddr_to_hs400;
host->tuning_delay = 1;
esdhc_init(pdev, host);
@@ -877,6 +1080,11 @@ static int sdhci_esdhc_probe(struct plat
pltfm_host = sdhci_priv(host);
esdhc = sdhci_pltfm_priv(pltfm_host);
+ if (soc_device_match(soc_fixup_tuning))
+ esdhc->quirk_fixup_tuning = true;
+ else
+ esdhc->quirk_fixup_tuning = false;
+
if (esdhc->vendor_ver == VENDOR_V_22)
host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
@@ -923,14 +1131,6 @@ static int sdhci_esdhc_probe(struct plat
return ret;
}
-static const struct of_device_id sdhci_esdhc_of_match[] = {
- { .compatible = "fsl,mpc8379-esdhc" },
- { .compatible = "fsl,mpc8536-esdhc" },
- { .compatible = "fsl,esdhc" },
- { }
-};
-MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
-
static struct platform_driver sdhci_esdhc_driver = {
.driver = {
.name = "sdhci-esdhc",
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2148,7 +2148,7 @@ static void sdhci_send_tuning(struct sdh
}
-static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
+static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int i;
@@ -2165,13 +2165,13 @@ static void __sdhci_execute_tuning(struc
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_abort_tuning(host, opcode);
- return;
+ return -ETIMEDOUT;
}
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
if (ctrl & SDHCI_CTRL_TUNED_CLK)
- return; /* Success! */
+ return 0; /* Success! */
break;
}
@@ -2183,6 +2183,7 @@ static void __sdhci_execute_tuning(struc
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_reset_tuning(host);
+ return -EAGAIN;
}
int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
@@ -2244,7 +2245,7 @@ int sdhci_execute_tuning(struct mmc_host
sdhci_start_tuning(host);
- __sdhci_execute_tuning(host, opcode);
+ host->tuning_err = __sdhci_execute_tuning(host, opcode);
sdhci_end_tuning(host);
out:
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -545,6 +545,7 @@ struct sdhci_host {
unsigned int tuning_count; /* Timer count for re-tuning */
unsigned int tuning_mode; /* Re-tuning mode supported by host */
+ unsigned int tuning_err; /* Error code for re-tuning */
#define SDHCI_TUNING_MODE_1 0
#define SDHCI_TUNING_MODE_2 1
#define SDHCI_TUNING_MODE_3 2
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -156,6 +156,7 @@ struct sd_switch_caps {
#define UHS_DDR50_MAX_DTR 50000000
#define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR
#define UHS_SDR12_MAX_DTR 25000000
+#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR
unsigned int sd3_bus_mode;
#define UHS_SDR12_BUS_SPEED 0
#define HIGH_SPEED_BUS_SPEED 1
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -145,6 +145,8 @@ struct mmc_host_ops {
/* Prepare HS400 target operating frequency depending host driver */
int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
+ int (*prepare_ddr_to_hs400)(struct mmc_host *host);
+
/* Prepare enhanced strobe depending host driver */
void (*hs400_enhanced_strobe)(struct mmc_host *host,
struct mmc_ios *ios);