You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/brcm2708/patches-3.18/0068-lirc-rpi-Add-device-tr...

296 lines
7.3 KiB

From f3c1830096661e270f11f2a33ffb7274f50c90a6 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 18 Dec 2014 16:48:32 +0000
Subject: [PATCH 068/114] lirc-rpi: Add device tree support, and a suitable
overlay
The overlay supports DT parameters that match the old module
parameters, except that gpio_in_pull should be set using the
strings "up", "down" or "off".
lirc-rpi: Also support pinctrl-bcm2835 in non-DT mode
---
arch/arm/boot/dts/lirc-rpi-overlay.dts | 57 ++++++++++++
drivers/staging/media/lirc/lirc_rpi.c | 154 +++++++++++++++++++++++++++------
2 files changed, 183 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/boot/dts/lirc-rpi-overlay.dts
--- /dev/null
+++ b/arch/arm/boot/dts/lirc-rpi-overlay.dts
@@ -0,0 +1,57 @@
+// Definitions for lirc-rpi module
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2708";
+
+ fragment@0 {
+ target-path = "/";
+ __overlay__ {
+ lirc_rpi: lirc_rpi {
+ compatible = "rpi,lirc-rpi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lirc_pins>;
+ status = "okay";
+
+ // Override autodetection of IR receiver circuit
+ // (0 = active high, 1 = active low, -1 = no override )
+ rpi,sense = <0xffffffff>;
+
+ // Software carrier
+ // (0 = off, 1 = on)
+ rpi,softcarrier = <1>;
+
+ // Invert output
+ // (0 = off, 1 = on)
+ rpi,invert = <0>;
+
+ // Enable debugging messages
+ // (0 = off, 1 = on)
+ rpi,debug = <0>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&gpio>;
+ __overlay__ {
+ lirc_pins: lirc_pins {
+ brcm,pins = <17 18>;
+ brcm,function = <1 0>; // out in
+ brcm,pull = <0 1>; // off down
+ };
+ };
+ };
+
+ __overrides__ {
+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0";
+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4";
+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4";
+
+ sense = <&lirc_rpi>,"rpi,sense:0";
+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0";
+ invert = <&lirc_rpi>,"rpi,invert:0";
+ debug = <&lirc_rpi>,"rpi,debug:0";
+ };
+};
--- a/drivers/staging/media/lirc/lirc_rpi.c
+++ b/drivers/staging/media/lirc/lirc_rpi.c
@@ -40,6 +40,7 @@
#include <media/lirc_dev.h>
#include <mach/gpio.h>
#include <linux/gpio.h>
+#include <linux/of_platform.h>
#include <linux/platform_data/bcm2708.h>
@@ -295,32 +296,117 @@ static int is_right_chip(struct gpio_chi
return 0;
}
+static inline int read_bool_property(const struct device_node *np,
+ const char *propname,
+ bool *out_value)
+{
+ u32 value = 0;
+ int err = of_property_read_u32(np, propname, &value);
+ if (err == 0)
+ *out_value = (value != 0);
+ return err;
+}
+
+static void read_pin_settings(struct device_node *node)
+{
+ u32 pin;
+ int index;
+
+ for (index = 0;
+ of_property_read_u32_index(
+ node,
+ "brcm,pins",
+ index,
+ &pin) == 0;
+ index++) {
+ u32 function;
+ int err;
+ err = of_property_read_u32_index(
+ node,
+ "brcm,function",
+ index,
+ &function);
+ if (err == 0) {
+ if (function == 1) /* Output */
+ gpio_out_pin = pin;
+ else if (function == 0) /* Input */
+ gpio_in_pin = pin;
+ }
+ }
+}
+
static int init_port(void)
{
int i, nlow, nhigh, ret;
+ struct device_node *node;
+
+ node = lirc_rpi_dev->dev.of_node;
gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip);
- if (!gpiochip)
+ /*
+ * Because of the lack of a setpull function, only support
+ * pinctrl-bcm2835 if using device tree.
+ */
+ if (!gpiochip && node)
+ gpiochip = gpiochip_find("pinctrl-bcm2835", is_right_chip);
+
+ if (!gpiochip) {
+ pr_err(LIRC_DRIVER_NAME ": gpio chip not found!\n");
return -ENODEV;
+ }
+
+ if (node) {
+ struct device_node *pins_node;
+
+ pins_node = of_parse_phandle(node, "pinctrl-0", 0);
+ if (!pins_node) {
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": pinctrl settings not found!\n");
+ ret = -EINVAL;
+ goto exit_init_port;
+ }
+
+ read_pin_settings(pins_node);
+
+ of_property_read_u32(node, "rpi,sense", &sense);
+
+ read_bool_property(node, "rpi,softcarrier", &softcarrier);
+
+ read_bool_property(node, "rpi,invert", &invert);
+
+ read_bool_property(node, "rpi,debug", &debug);
+
+ }
+ else
+ {
+ if (gpio_in_pin >= BCM2708_NR_GPIOS ||
+ gpio_out_pin >= BCM2708_NR_GPIOS) {
+ ret = -EINVAL;
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": invalid GPIO pin(s) specified!\n");
+ goto exit_init_port;
+ }
+
+ if (gpio_request(gpio_out_pin, LIRC_DRIVER_NAME " ir/out")) {
+ printk(KERN_ALERT LIRC_DRIVER_NAME
+ ": cant claim gpio pin %d\n", gpio_out_pin);
+ ret = -ENODEV;
+ goto exit_init_port;
+ }
+
+ if (gpio_request(gpio_in_pin, LIRC_DRIVER_NAME " ir/in")) {
+ printk(KERN_ALERT LIRC_DRIVER_NAME
+ ": cant claim gpio pin %d\n", gpio_in_pin);
+ ret = -ENODEV;
+ goto exit_gpio_free_out_pin;
+ }
+
+ bcm2708_gpio_setpull(gpiochip, gpio_in_pin, gpio_in_pull);
+ gpiochip->direction_input(gpiochip, gpio_in_pin);
+ gpiochip->direction_output(gpiochip, gpio_out_pin, 1);
+ }
- if (gpio_request(gpio_out_pin, LIRC_DRIVER_NAME " ir/out")) {
- printk(KERN_ALERT LIRC_DRIVER_NAME
- ": cant claim gpio pin %d\n", gpio_out_pin);
- ret = -ENODEV;
- goto exit_init_port;
- }
-
- if (gpio_request(gpio_in_pin, LIRC_DRIVER_NAME " ir/in")) {
- printk(KERN_ALERT LIRC_DRIVER_NAME
- ": cant claim gpio pin %d\n", gpio_in_pin);
- ret = -ENODEV;
- goto exit_gpio_free_out_pin;
- }
-
- bcm2708_gpio_setpull(gpiochip, gpio_in_pin, gpio_in_pull);
- gpiochip->direction_input(gpiochip, gpio_in_pin);
- gpiochip->direction_output(gpiochip, gpio_out_pin, 1);
gpiochip->set(gpiochip, gpio_out_pin, invert);
irq_num = gpiochip->to_irq(gpiochip, gpio_in_pin);
@@ -514,15 +600,23 @@ static struct lirc_driver driver = {
.owner = THIS_MODULE,
};
+static const struct of_device_id lirc_rpi_of_match[] = {
+ { .compatible = "rpi,lirc-rpi", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lirc_rpi_of_match);
+
static struct platform_driver lirc_rpi_driver = {
.driver = {
.name = LIRC_DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lirc_rpi_of_match),
},
};
static int __init lirc_rpi_init(void)
{
+ struct device_node *node;
int result;
/* Init read buffer. */
@@ -537,15 +631,26 @@ static int __init lirc_rpi_init(void)
goto exit_buffer_free;
}
- lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0);
- if (!lirc_rpi_dev) {
- result = -ENOMEM;
- goto exit_driver_unregister;
- }
+ node = of_find_compatible_node(NULL, NULL,
+ lirc_rpi_of_match[0].compatible);
- result = platform_device_add(lirc_rpi_dev);
- if (result)
- goto exit_device_put;
+ if (node) {
+ /* DT-enabled */
+ lirc_rpi_dev = of_find_device_by_node(node);
+ WARN_ON(lirc_rpi_dev->dev.of_node != node);
+ of_node_put(node);
+ }
+ else {
+ lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0);
+ if (!lirc_rpi_dev) {
+ result = -ENOMEM;
+ goto exit_driver_unregister;
+ }
+
+ result = platform_device_add(lirc_rpi_dev);
+ if (result)
+ goto exit_device_put;
+ }
return 0;
@@ -577,13 +682,6 @@ static int __init lirc_rpi_init_module(v
if (result)
return result;
- if (gpio_in_pin >= BCM2708_NR_GPIOS || gpio_out_pin >= BCM2708_NR_GPIOS) {
- result = -EINVAL;
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": invalid GPIO pin(s) specified!\n");
- goto exit_rpi;
- }
-
result = init_port();
if (result < 0)
goto exit_rpi;