You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
716 lines
23 KiB
716 lines
23 KiB
--- a/drivers/bcma/driver_chipcommon.c
|
|
+++ b/drivers/bcma/driver_chipcommon.c
|
|
@@ -15,6 +15,8 @@
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bcma/bcma.h>
|
|
|
|
+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
|
|
+
|
|
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
|
|
u32 mask, u32 value)
|
|
{
|
|
@@ -113,8 +115,37 @@ int bcma_chipco_watchdog_register(struct
|
|
return 0;
|
|
}
|
|
|
|
+static void bcma_core_chipcommon_flash_detect(struct bcma_drv_cc *cc)
|
|
+{
|
|
+ struct bcma_bus *bus = cc->core->bus;
|
|
+
|
|
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
+ case BCMA_CC_FLASHT_STSER:
|
|
+ case BCMA_CC_FLASHT_ATSER:
|
|
+ bcma_debug(bus, "Found serial flash\n");
|
|
+ bcma_sflash_init(cc);
|
|
+ break;
|
|
+ case BCMA_CC_FLASHT_PARA:
|
|
+ bcma_debug(bus, "Found parallel flash\n");
|
|
+ bcma_pflash_init(cc);
|
|
+ break;
|
|
+ default:
|
|
+ bcma_err(bus, "Flash type not supported\n");
|
|
+ }
|
|
+
|
|
+ if (cc->core->id.rev == 38 ||
|
|
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
|
|
+ if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
|
|
+ bcma_debug(bus, "Found NAND flash\n");
|
|
+ bcma_nflash_init(cc);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
|
|
{
|
|
+ struct bcma_bus *bus = cc->core->bus;
|
|
+
|
|
if (cc->early_setup_done)
|
|
return;
|
|
|
|
@@ -129,6 +160,12 @@ void bcma_core_chipcommon_early_init(str
|
|
if (cc->capabilities & BCMA_CC_CAP_PMU)
|
|
bcma_pmu_early_init(cc);
|
|
|
|
+ if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC)
|
|
+ bcma_chipco_serial_init(cc);
|
|
+
|
|
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
|
|
+ bcma_core_chipcommon_flash_detect(cc);
|
|
+
|
|
cc->early_setup_done = true;
|
|
}
|
|
|
|
@@ -185,11 +222,12 @@ u32 bcma_chipco_watchdog_timer_set(struc
|
|
ticks = 2;
|
|
else if (ticks > maxt)
|
|
ticks = maxt;
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
|
|
} else {
|
|
struct bcma_bus *bus = cc->core->bus;
|
|
|
|
if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 &&
|
|
+ bus->chipinfo.id != BCMA_CHIP_ID_BCM47094 &&
|
|
bus->chipinfo.id != BCMA_CHIP_ID_BCM53018)
|
|
bcma_core_set_clockmode(cc->core,
|
|
ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC);
|
|
@@ -314,9 +352,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm
|
|
return res;
|
|
}
|
|
|
|
-#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
-void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
|
|
+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
|
|
{
|
|
+#if IS_BUILTIN(CONFIG_BCM47XX)
|
|
unsigned int irq;
|
|
u32 baud_base;
|
|
u32 i;
|
|
@@ -358,5 +396,5 @@ void bcma_chipco_serial_init(struct bcma
|
|
ports[i].baud_base = baud_base;
|
|
ports[i].reg_shift = 0;
|
|
}
|
|
+#endif /* CONFIG_BCM47XX */
|
|
}
|
|
-#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
--- a/drivers/bcma/driver_chipcommon_pmu.c
|
|
+++ b/drivers/bcma/driver_chipcommon_pmu.c
|
|
@@ -15,44 +15,44 @@
|
|
|
|
u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
|
|
- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
|
|
- return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
|
|
+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
|
|
+ return bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
|
|
|
|
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
|
|
- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
|
|
+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
|
|
|
|
void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
|
|
u32 set)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
|
|
- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
|
|
- bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
|
|
+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
|
|
+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_PLLCTL_DATA, mask, set);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
|
|
|
|
void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
|
|
u32 offset, u32 mask, u32 set)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
|
|
- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
|
|
- bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_CHIPCTL_ADDR, offset);
|
|
+ bcma_pmu_read32(cc, BCMA_CC_PMU_CHIPCTL_ADDR);
|
|
+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_CHIPCTL_DATA, mask, set);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
|
|
|
|
void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
|
|
u32 set)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
|
|
- bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
|
|
- bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_REGCTL_ADDR, offset);
|
|
+ bcma_pmu_read32(cc, BCMA_CC_PMU_REGCTL_ADDR);
|
|
+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_REGCTL_DATA, mask, set);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
|
|
|
|
@@ -60,18 +60,18 @@ static u32 bcma_pmu_xtalfreq(struct bcma
|
|
{
|
|
u32 ilp_ctl, alp_hz;
|
|
|
|
- if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
|
|
+ if (!(bcma_pmu_read32(cc, BCMA_CC_PMU_STAT) &
|
|
BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
|
|
return 0;
|
|
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
|
|
- BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
|
|
+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
|
|
usleep_range(1000, 2000);
|
|
|
|
- ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
|
|
+ ilp_ctl = bcma_pmu_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
|
|
ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
|
|
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
|
|
|
|
alp_hz = ilp_ctl * 32768 / 4;
|
|
return (alp_hz + 50000) / 100000 * 100;
|
|
@@ -127,8 +127,8 @@ static void bcma_pmu2_pll_init0(struct b
|
|
mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
|
|
BCMA_RES_4314_MACPHY_CLK_AVAIL);
|
|
|
|
- bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
|
|
- bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
|
|
+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
|
|
+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
|
|
bcma_wait_value(cc->core, BCMA_CLKCTLST,
|
|
BCMA_CLKCTLST_HAVEHT, 0, 20000);
|
|
break;
|
|
@@ -140,7 +140,7 @@ static void bcma_pmu2_pll_init0(struct b
|
|
|
|
/* Flush */
|
|
if (cc->pmu.rev >= 2)
|
|
- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
|
|
+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
|
|
|
|
/* TODO: Do we need to update OTP? */
|
|
}
|
|
@@ -195,9 +195,9 @@ static void bcma_pmu_resources_init(stru
|
|
|
|
/* Set the resource masks. */
|
|
if (min_msk)
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
|
|
if (max_msk)
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
|
|
|
|
/*
|
|
* Add some delay; allow resources to come up and settle.
|
|
@@ -269,23 +269,33 @@ static void bcma_pmu_workarounds(struct
|
|
|
|
void bcma_pmu_early_init(struct bcma_drv_cc *cc)
|
|
{
|
|
+ struct bcma_bus *bus = cc->core->bus;
|
|
u32 pmucap;
|
|
|
|
- pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
|
|
+ if (cc->core->id.rev >= 35 &&
|
|
+ cc->capabilities_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) {
|
|
+ cc->pmu.core = bcma_find_core(bus, BCMA_CORE_PMU);
|
|
+ if (!cc->pmu.core)
|
|
+ bcma_warn(bus, "Couldn't find expected PMU core");
|
|
+ }
|
|
+ if (!cc->pmu.core)
|
|
+ cc->pmu.core = cc->core;
|
|
+
|
|
+ pmucap = bcma_pmu_read32(cc, BCMA_CC_PMU_CAP);
|
|
cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
|
|
|
|
- bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
|
|
- cc->pmu.rev, pmucap);
|
|
+ bcma_debug(bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
|
|
+ pmucap);
|
|
}
|
|
|
|
void bcma_pmu_init(struct bcma_drv_cc *cc)
|
|
{
|
|
if (cc->pmu.rev == 1)
|
|
- bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
|
|
- ~BCMA_CC_PMU_CTL_NOILPONW);
|
|
+ bcma_pmu_mask32(cc, BCMA_CC_PMU_CTL,
|
|
+ ~BCMA_CC_PMU_CTL_NOILPONW);
|
|
else
|
|
- bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
|
|
- BCMA_CC_PMU_CTL_NOILPONW);
|
|
+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL,
|
|
+ BCMA_CC_PMU_CTL_NOILPONW);
|
|
|
|
bcma_pmu_pll_init(cc);
|
|
bcma_pmu_resources_init(cc);
|
|
@@ -472,8 +482,8 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d
|
|
static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
|
|
u32 value)
|
|
{
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
|
|
}
|
|
|
|
void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
|
|
@@ -497,20 +507,20 @@ void bcma_pmu_spuravoid_pllupdate(struct
|
|
bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
|
|
|
|
/* RMW only the P1 divider */
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
|
|
BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
|
|
- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
|
|
+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
|
|
tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
|
|
tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
|
|
|
|
/* RMW only the int feedback divider */
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
|
|
BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
|
|
- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
|
|
+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
|
|
tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
|
|
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
|
|
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
|
|
|
|
tmp = BCMA_CC_PMU_CTL_PLL_UPD;
|
|
break;
|
|
@@ -646,7 +656,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
|
|
break;
|
|
}
|
|
|
|
- tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
|
|
- bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
|
|
+ tmp |= bcma_pmu_read32(cc, BCMA_CC_PMU_CTL);
|
|
+ bcma_pmu_write32(cc, BCMA_CC_PMU_CTL, tmp);
|
|
}
|
|
EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
|
|
--- a/drivers/bcma/driver_chipcommon_sflash.c
|
|
+++ b/drivers/bcma/driver_chipcommon_sflash.c
|
|
@@ -38,6 +38,7 @@ static const struct bcma_sflash_tbl_e bc
|
|
{ "M25P32", 0x15, 0x10000, 64, },
|
|
{ "M25P64", 0x16, 0x10000, 128, },
|
|
{ "M25FL128", 0x17, 0x10000, 256, },
|
|
+ { "MX25L25635F", 0x18, 0x10000, 512, },
|
|
{ NULL },
|
|
};
|
|
|
|
--- a/drivers/bcma/scan.c
|
|
+++ b/drivers/bcma/scan.c
|
|
@@ -98,6 +98,9 @@ static const struct bcma_device_id_name
|
|
{ BCMA_CORE_SHIM, "SHIM" },
|
|
{ BCMA_CORE_PCIE2, "PCIe Gen2" },
|
|
{ BCMA_CORE_ARM_CR4, "ARM CR4" },
|
|
+ { BCMA_CORE_GCI, "GCI" },
|
|
+ { BCMA_CORE_CMEM, "CNDS DDR2/3 memory controller" },
|
|
+ { BCMA_CORE_ARM_CA7, "ARM CA7" },
|
|
{ BCMA_CORE_DEFAULT, "Default" },
|
|
};
|
|
|
|
@@ -315,6 +318,8 @@ static int bcma_get_next_core(struct bcm
|
|
switch (core->id.id) {
|
|
case BCMA_CORE_4706_MAC_GBIT_COMMON:
|
|
case BCMA_CORE_NS_CHIPCOMMON_B:
|
|
+ case BCMA_CORE_PMU:
|
|
+ case BCMA_CORE_GCI:
|
|
/* Not used yet: case BCMA_CORE_OOB_ROUTER: */
|
|
break;
|
|
default:
|
|
--- a/drivers/net/wireless/b43/main.c
|
|
+++ b/drivers/net/wireless/b43/main.c
|
|
@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str
|
|
case B43_BUS_BCMA:
|
|
bcma_cc = &dev->dev->bdev->bus->drv_cc;
|
|
|
|
- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0);
|
|
- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
|
|
- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4);
|
|
- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
|
|
+ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0);
|
|
+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
|
|
+ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4);
|
|
+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_B43_SSB
|
|
--- a/include/linux/bcma/bcma.h
|
|
+++ b/include/linux/bcma/bcma.h
|
|
@@ -151,6 +151,8 @@ struct bcma_host_ops {
|
|
#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
|
|
#define BCMA_CORE_USB30_DEV 0x83D
|
|
#define BCMA_CORE_ARM_CR4 0x83E
|
|
+#define BCMA_CORE_GCI 0x840
|
|
+#define BCMA_CORE_CMEM 0x846 /* CNDS DDR2/3 memory controller */
|
|
#define BCMA_CORE_ARM_CA7 0x847
|
|
#define BCMA_CORE_SYS_MEM 0x849
|
|
#define BCMA_CORE_DEFAULT 0xFFF
|
|
@@ -200,6 +202,7 @@ struct bcma_host_ops {
|
|
#define BCMA_PKG_ID_BCM4707 1
|
|
#define BCMA_PKG_ID_BCM4708 2
|
|
#define BCMA_PKG_ID_BCM4709 0
|
|
+#define BCMA_CHIP_ID_BCM47094 53030
|
|
#define BCMA_CHIP_ID_BCM53018 53018
|
|
|
|
/* Board types (on PCI usually equals to the subsystem dev id) */
|
|
--- a/include/linux/bcma/bcma_driver_chipcommon.h
|
|
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
|
|
@@ -217,6 +217,11 @@
|
|
#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
|
|
#define BCMA_CC_CLKDIV_UART 0x000000FF
|
|
#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
|
|
+#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001
|
|
+#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002
|
|
+#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004
|
|
+#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */
|
|
+#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040
|
|
#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
|
|
#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
|
|
#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
|
|
@@ -351,12 +356,12 @@
|
|
#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
|
|
#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
|
|
#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
|
|
-#define BCMA_CC_CHIPCTL_ADDR 0x0650
|
|
-#define BCMA_CC_CHIPCTL_DATA 0x0654
|
|
-#define BCMA_CC_REGCTL_ADDR 0x0658
|
|
-#define BCMA_CC_REGCTL_DATA 0x065C
|
|
-#define BCMA_CC_PLLCTL_ADDR 0x0660
|
|
-#define BCMA_CC_PLLCTL_DATA 0x0664
|
|
+#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650
|
|
+#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654
|
|
+#define BCMA_CC_PMU_REGCTL_ADDR 0x0658
|
|
+#define BCMA_CC_PMU_REGCTL_DATA 0x065C
|
|
+#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660
|
|
+#define BCMA_CC_PMU_PLLCTL_DATA 0x0664
|
|
#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
|
|
#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
|
|
#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
|
|
@@ -566,17 +571,16 @@
|
|
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
|
|
*/
|
|
struct bcma_chipcommon_pmu {
|
|
+ struct bcma_device *core; /* Can be separated core or just ChipCommon one */
|
|
u8 rev; /* PMU revision */
|
|
u32 crystalfreq; /* The active crystal frequency (in kHz) */
|
|
};
|
|
|
|
-#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
+#ifdef CONFIG_BCMA_PFLASH
|
|
struct bcma_pflash {
|
|
bool present;
|
|
- u8 buswidth;
|
|
- u32 window;
|
|
- u32 window_size;
|
|
};
|
|
+#endif
|
|
|
|
#ifdef CONFIG_BCMA_SFLASH
|
|
struct bcma_sflash {
|
|
@@ -602,6 +606,7 @@ struct bcma_nflash {
|
|
};
|
|
#endif
|
|
|
|
+#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
struct bcma_serial_port {
|
|
void *regs;
|
|
unsigned long clockspeed;
|
|
@@ -621,8 +626,9 @@ struct bcma_drv_cc {
|
|
/* Fast Powerup Delay constant */
|
|
u16 fast_pwrup_delay;
|
|
struct bcma_chipcommon_pmu pmu;
|
|
-#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
+#ifdef CONFIG_BCMA_PFLASH
|
|
struct bcma_pflash pflash;
|
|
+#endif
|
|
#ifdef CONFIG_BCMA_SFLASH
|
|
struct bcma_sflash sflash;
|
|
#endif
|
|
@@ -630,6 +636,7 @@ struct bcma_drv_cc {
|
|
struct bcma_nflash nflash;
|
|
#endif
|
|
|
|
+#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
int nr_serial_ports;
|
|
struct bcma_serial_port serial_ports[4];
|
|
#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
@@ -663,6 +670,19 @@ struct bcma_drv_cc_b {
|
|
#define bcma_cc_maskset32(cc, offset, mask, set) \
|
|
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
|
|
|
|
+/* PMU registers access */
|
|
+#define bcma_pmu_read32(cc, offset) \
|
|
+ bcma_read32((cc)->pmu.core, offset)
|
|
+#define bcma_pmu_write32(cc, offset, val) \
|
|
+ bcma_write32((cc)->pmu.core, offset, val)
|
|
+
|
|
+#define bcma_pmu_mask32(cc, offset, mask) \
|
|
+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask))
|
|
+#define bcma_pmu_set32(cc, offset, set) \
|
|
+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set))
|
|
+#define bcma_pmu_maskset32(cc, offset, mask, set) \
|
|
+ bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set))
|
|
+
|
|
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
|
|
|
|
extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
|
|
--- a/drivers/bcma/bcma_private.h
|
|
+++ b/drivers/bcma/bcma_private.h
|
|
@@ -44,10 +44,6 @@ int bcma_sprom_get(struct bcma_bus *bus)
|
|
void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
|
|
void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
|
|
void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
|
|
-#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
-void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
|
|
-extern struct platform_device bcma_pflash_dev;
|
|
-#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
|
|
/* driver_chipcommon_b.c */
|
|
int bcma_core_chipcommon_b_init(struct bcma_drv_cc_b *ccb);
|
|
@@ -59,6 +55,21 @@ void bcma_pmu_init(struct bcma_drv_cc *c
|
|
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
|
|
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
|
|
|
|
+/**************************************************
|
|
+ * driver_chipcommon_sflash.c
|
|
+ **************************************************/
|
|
+
|
|
+#ifdef CONFIG_BCMA_PFLASH
|
|
+extern struct platform_device bcma_pflash_dev;
|
|
+int bcma_pflash_init(struct bcma_drv_cc *cc);
|
|
+#else
|
|
+static inline int bcma_pflash_init(struct bcma_drv_cc *cc)
|
|
+{
|
|
+ bcma_err(cc->core->bus, "Parallel flash not supported\n");
|
|
+ return 0;
|
|
+}
|
|
+#endif /* CONFIG_BCMA_PFLASH */
|
|
+
|
|
#ifdef CONFIG_BCMA_SFLASH
|
|
/* driver_chipcommon_sflash.c */
|
|
int bcma_sflash_init(struct bcma_drv_cc *cc);
|
|
--- a/drivers/bcma/driver_gpio.c
|
|
+++ b/drivers/bcma/driver_gpio.c
|
|
@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
|
|
case BCMA_CHIP_ID_BCM4707:
|
|
case BCMA_CHIP_ID_BCM5357:
|
|
case BCMA_CHIP_ID_BCM53572:
|
|
+ case BCMA_CHIP_ID_BCM47094:
|
|
chip->ngpio = 32;
|
|
break;
|
|
default:
|
|
--- a/drivers/bcma/driver_mips.c
|
|
+++ b/drivers/bcma/driver_mips.c
|
|
@@ -14,8 +14,6 @@
|
|
|
|
#include <linux/bcma/bcma.h>
|
|
|
|
-#include <linux/mtd/physmap.h>
|
|
-#include <linux/platform_device.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_reg.h>
|
|
@@ -32,26 +30,6 @@ enum bcma_boot_dev {
|
|
BCMA_BOOT_DEV_NAND,
|
|
};
|
|
|
|
-static const char * const part_probes[] = { "bcm47xxpart", NULL };
|
|
-
|
|
-static struct physmap_flash_data bcma_pflash_data = {
|
|
- .part_probe_types = part_probes,
|
|
-};
|
|
-
|
|
-static struct resource bcma_pflash_resource = {
|
|
- .name = "bcma_pflash",
|
|
- .flags = IORESOURCE_MEM,
|
|
-};
|
|
-
|
|
-struct platform_device bcma_pflash_dev = {
|
|
- .name = "physmap-flash",
|
|
- .dev = {
|
|
- .platform_data = &bcma_pflash_data,
|
|
- },
|
|
- .resource = &bcma_pflash_resource,
|
|
- .num_resources = 1,
|
|
-};
|
|
-
|
|
/* The 47162a0 hangs when reading MIPS DMP registers registers */
|
|
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
|
|
{
|
|
@@ -272,48 +250,11 @@ static enum bcma_boot_dev bcma_boot_dev(
|
|
return BCMA_BOOT_DEV_SERIAL;
|
|
}
|
|
|
|
-static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
|
|
+static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore)
|
|
{
|
|
struct bcma_bus *bus = mcore->core->bus;
|
|
- struct bcma_drv_cc *cc = &bus->drv_cc;
|
|
- struct bcma_pflash *pflash = &cc->pflash;
|
|
enum bcma_boot_dev boot_dev;
|
|
|
|
- switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
- case BCMA_CC_FLASHT_STSER:
|
|
- case BCMA_CC_FLASHT_ATSER:
|
|
- bcma_debug(bus, "Found serial flash\n");
|
|
- bcma_sflash_init(cc);
|
|
- break;
|
|
- case BCMA_CC_FLASHT_PARA:
|
|
- bcma_debug(bus, "Found parallel flash\n");
|
|
- pflash->present = true;
|
|
- pflash->window = BCMA_SOC_FLASH2;
|
|
- pflash->window_size = BCMA_SOC_FLASH2_SZ;
|
|
-
|
|
- if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
|
|
- BCMA_CC_FLASH_CFG_DS) == 0)
|
|
- pflash->buswidth = 1;
|
|
- else
|
|
- pflash->buswidth = 2;
|
|
-
|
|
- bcma_pflash_data.width = pflash->buswidth;
|
|
- bcma_pflash_resource.start = pflash->window;
|
|
- bcma_pflash_resource.end = pflash->window + pflash->window_size;
|
|
-
|
|
- break;
|
|
- default:
|
|
- bcma_err(bus, "Flash type not supported\n");
|
|
- }
|
|
-
|
|
- if (cc->core->id.rev == 38 ||
|
|
- bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
|
|
- if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
|
|
- bcma_debug(bus, "Found NAND flash\n");
|
|
- bcma_nflash_init(cc);
|
|
- }
|
|
- }
|
|
-
|
|
/* Determine flash type this SoC boots from */
|
|
boot_dev = bcma_boot_dev(bus);
|
|
switch (boot_dev) {
|
|
@@ -337,13 +278,10 @@ static void bcma_core_mips_flash_detect(
|
|
|
|
void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
|
|
{
|
|
- struct bcma_bus *bus = mcore->core->bus;
|
|
-
|
|
if (mcore->early_setup_done)
|
|
return;
|
|
|
|
- bcma_chipco_serial_init(&bus->drv_cc);
|
|
- bcma_core_mips_flash_detect(mcore);
|
|
+ bcma_core_mips_nvram_init(mcore);
|
|
|
|
mcore->early_setup_done = true;
|
|
}
|
|
--- a/drivers/bcma/host_pci.c
|
|
+++ b/drivers/bcma/host_pci.c
|
|
@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
|
|
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
|
|
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
|
|
--- a/drivers/bcma/Kconfig
|
|
+++ b/drivers/bcma/Kconfig
|
|
@@ -70,6 +70,11 @@ config BCMA_DRIVER_MIPS
|
|
|
|
If unsure, say N
|
|
|
|
+config BCMA_PFLASH
|
|
+ bool
|
|
+ depends on BCMA_DRIVER_MIPS
|
|
+ default y
|
|
+
|
|
config BCMA_SFLASH
|
|
bool
|
|
depends on BCMA_DRIVER_MIPS
|
|
--- a/drivers/bcma/Makefile
|
|
+++ b/drivers/bcma/Makefile
|
|
@@ -1,6 +1,7 @@
|
|
bcma-y += main.o scan.o core.o sprom.o
|
|
bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
|
|
bcma-y += driver_chipcommon_b.o
|
|
+bcma-$(CONFIG_BCMA_PFLASH) += driver_chipcommon_pflash.o
|
|
bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
|
|
bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
|
|
bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o
|
|
--- /dev/null
|
|
+++ b/drivers/bcma/driver_chipcommon_pflash.c
|
|
@@ -0,0 +1,49 @@
|
|
+/*
|
|
+ * Broadcom specific AMBA
|
|
+ * ChipCommon parallel flash
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include "bcma_private.h"
|
|
+
|
|
+#include <linux/bcma/bcma.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+static const char * const part_probes[] = { "bcm47xxpart", NULL };
|
|
+
|
|
+static struct physmap_flash_data bcma_pflash_data = {
|
|
+ .part_probe_types = part_probes,
|
|
+};
|
|
+
|
|
+static struct resource bcma_pflash_resource = {
|
|
+ .name = "bcma_pflash",
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+struct platform_device bcma_pflash_dev = {
|
|
+ .name = "physmap-flash",
|
|
+ .dev = {
|
|
+ .platform_data = &bcma_pflash_data,
|
|
+ },
|
|
+ .resource = &bcma_pflash_resource,
|
|
+ .num_resources = 1,
|
|
+};
|
|
+
|
|
+int bcma_pflash_init(struct bcma_drv_cc *cc)
|
|
+{
|
|
+ struct bcma_pflash *pflash = &cc->pflash;
|
|
+
|
|
+ pflash->present = true;
|
|
+
|
|
+ if (!(bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & BCMA_CC_FLASH_CFG_DS))
|
|
+ bcma_pflash_data.width = 1;
|
|
+ else
|
|
+ bcma_pflash_data.width = 2;
|
|
+
|
|
+ bcma_pflash_resource.start = BCMA_SOC_FLASH2;
|
|
+ bcma_pflash_resource.end = BCMA_SOC_FLASH2 + BCMA_SOC_FLASH2_SZ;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
--- a/drivers/bcma/main.c
|
|
+++ b/drivers/bcma/main.c
|
|
@@ -325,7 +325,7 @@ static int bcma_register_devices(struct
|
|
bcma_register_core(bus, core);
|
|
}
|
|
|
|
-#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
+#ifdef CONFIG_BCMA_PFLASH
|
|
if (bus->drv_cc.pflash.present) {
|
|
err = platform_device_register(&bcma_pflash_dev);
|
|
if (err)
|
|
|