You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
184 lines
4.6 KiB
184 lines
4.6 KiB
From 355bf7c6410f5b6e37b5c2b28ebe59bb701c42d6 Mon Sep 17 00:00:00 2001
|
|
From: Kumar Gala <galak@codeaurora.org>
|
|
Date: Wed, 28 May 2014 12:12:40 -0500
|
|
Subject: [PATCH 093/182] ARM: dts: qcom: Update msm8660 device trees
|
|
|
|
* Move SoC peripherals into an SoC container node
|
|
* Move serial enabling into board file (qcom-msm8660-surf.dts)
|
|
* Cleanup cpu node to match binding spec, enable-method and compatible
|
|
should be per cpu, not part of the container
|
|
* Add GSBI node and configuration of GSBI controller
|
|
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-msm8660-surf.dts | 10 +++
|
|
arch/arm/boot/dts/qcom-msm8660.dtsi | 115 ++++++++++++++++++-------------
|
|
2 files changed, 78 insertions(+), 47 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
|
|
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
|
|
@@ -3,4 +3,14 @@
|
|
/ {
|
|
model = "Qualcomm MSM8660 SURF";
|
|
compatible = "qcom,msm8660-surf", "qcom,msm8660";
|
|
+
|
|
+ soc {
|
|
+ gsbi@19c00000 {
|
|
+ status = "ok";
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ serial@19c40000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
|
|
@@ -3,6 +3,7 @@
|
|
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8660";
|
|
@@ -12,16 +13,18 @@
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
- compatible = "qcom,scorpion";
|
|
- enable-method = "qcom,gcc-msm8660";
|
|
|
|
cpu@0 {
|
|
+ compatible = "qcom,scorpion";
|
|
+ enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
+ compatible = "qcom,scorpion";
|
|
+ enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
@@ -33,55 +36,73 @@
|
|
};
|
|
};
|
|
|
|
- intc: interrupt-controller@2080000 {
|
|
- compatible = "qcom,msm-8660-qgic";
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <3>;
|
|
- reg = < 0x02080000 0x1000 >,
|
|
- < 0x02081000 0x1000 >;
|
|
- };
|
|
+ soc: soc {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ compatible = "simple-bus";
|
|
+
|
|
+ intc: interrupt-controller@2080000 {
|
|
+ compatible = "qcom,msm-8660-qgic";
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <3>;
|
|
+ reg = < 0x02080000 0x1000 >,
|
|
+ < 0x02081000 0x1000 >;
|
|
+ };
|
|
|
|
- timer@2000000 {
|
|
- compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
- interrupts = <1 0 0x301>,
|
|
- <1 1 0x301>,
|
|
- <1 2 0x301>;
|
|
- reg = <0x02000000 0x100>;
|
|
- clock-frequency = <27000000>,
|
|
- <32768>;
|
|
- cpu-offset = <0x40000>;
|
|
- };
|
|
+ timer@2000000 {
|
|
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
+ interrupts = <1 0 0x301>,
|
|
+ <1 1 0x301>,
|
|
+ <1 2 0x301>;
|
|
+ reg = <0x02000000 0x100>;
|
|
+ clock-frequency = <27000000>,
|
|
+ <32768>;
|
|
+ cpu-offset = <0x40000>;
|
|
+ };
|
|
|
|
- msmgpio: gpio@800000 {
|
|
- compatible = "qcom,msm-gpio";
|
|
- reg = <0x00800000 0x4000>;
|
|
- gpio-controller;
|
|
- #gpio-cells = <2>;
|
|
- ngpio = <173>;
|
|
- interrupts = <0 16 0x4>;
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <2>;
|
|
- };
|
|
+ msmgpio: gpio@800000 {
|
|
+ compatible = "qcom,msm-gpio";
|
|
+ reg = <0x00800000 0x4000>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ ngpio = <173>;
|
|
+ interrupts = <0 16 0x4>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
|
|
- gcc: clock-controller@900000 {
|
|
- compatible = "qcom,gcc-msm8660";
|
|
- #clock-cells = <1>;
|
|
- #reset-cells = <1>;
|
|
- reg = <0x900000 0x4000>;
|
|
- };
|
|
+ gcc: clock-controller@900000 {
|
|
+ compatible = "qcom,gcc-msm8660";
|
|
+ #clock-cells = <1>;
|
|
+ #reset-cells = <1>;
|
|
+ reg = <0x900000 0x4000>;
|
|
+ };
|
|
|
|
- serial@19c40000 {
|
|
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
- reg = <0x19c40000 0x1000>,
|
|
- <0x19c00000 0x1000>;
|
|
- interrupts = <0 195 0x0>;
|
|
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
- clock-names = "core", "iface";
|
|
- };
|
|
+ gsbi12: gsbi@19c00000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x19c00000 0x100>;
|
|
+ clocks = <&gcc GSBI12_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+
|
|
+ serial@19c40000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x19c40000 0x1000>,
|
|
+ <0x19c00000 0x1000>;
|
|
+ interrupts = <0 195 0x0>;
|
|
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
|
|
- qcom,ssbi@500000 {
|
|
- compatible = "qcom,ssbi";
|
|
- reg = <0x500000 0x1000>;
|
|
- qcom,controller-type = "pmic-arbiter";
|
|
+ qcom,ssbi@500000 {
|
|
+ compatible = "qcom,ssbi";
|
|
+ reg = <0x500000 0x1000>;
|
|
+ qcom,controller-type = "pmic-arbiter";
|
|
+ };
|
|
};
|
|
};
|
|
|