You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
124 lines
3.9 KiB
124 lines
3.9 KiB
From 317c5224795b41a08ba8c08573d74ba95096faa5 Mon Sep 17 00:00:00 2001
|
|
From: Reinder de Haan <patchesrdh@mveas.com>
|
|
Date: Fri, 11 Dec 2015 16:32:18 +0100
|
|
Subject: [PATCH] phy-sun4i-usb: Add support for the host usb-phys found on the
|
|
H3 SoC
|
|
|
|
Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
|
|
not yet (fully) supported after this commit.
|
|
|
|
Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Acked-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
---
|
|
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
|
|
drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++-----
|
|
2 files changed, 33 insertions(+), 9 deletions(-)
|
|
|
|
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
|
|
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
|
|
@@ -9,6 +9,7 @@ Required properties:
|
|
* allwinner,sun7i-a20-usb-phy
|
|
* allwinner,sun8i-a23-usb-phy
|
|
* allwinner,sun8i-a33-usb-phy
|
|
+ * allwinner,sun8i-h3-usb-phy
|
|
- reg : a list of offset + length pairs
|
|
- reg-names :
|
|
* "phy_ctrl"
|
|
--- a/drivers/phy/phy-sun4i-usb.c
|
|
+++ b/drivers/phy/phy-sun4i-usb.c
|
|
@@ -47,6 +47,9 @@
|
|
#define REG_PHYBIST 0x08
|
|
#define REG_PHYTUNE 0x0c
|
|
#define REG_PHYCTL_A33 0x10
|
|
+#define REG_PHY_UNK_H3 0x20
|
|
+
|
|
+#define REG_PMU_UNK_H3 0x10
|
|
|
|
#define PHYCTL_DATA BIT(7)
|
|
|
|
@@ -80,7 +83,7 @@
|
|
#define PHY_DISCON_TH_SEL 0x2a
|
|
#define PHY_SQUELCH_DETECT 0x3c
|
|
|
|
-#define MAX_PHYS 3
|
|
+#define MAX_PHYS 4
|
|
|
|
/*
|
|
* Note do not raise the debounce time, we must report Vusb high within 100ms
|
|
@@ -92,6 +95,7 @@
|
|
enum sun4i_usb_phy_type {
|
|
sun4i_a10_phy,
|
|
sun8i_a33_phy,
|
|
+ sun8i_h3_phy,
|
|
};
|
|
|
|
struct sun4i_usb_phy_cfg {
|
|
@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy
|
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
|
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
|
|
int ret;
|
|
+ u32 val;
|
|
|
|
ret = clk_prepare_enable(phy->clk);
|
|
if (ret)
|
|
@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy
|
|
return ret;
|
|
}
|
|
|
|
- /* Enable USB 45 Ohm resistor calibration */
|
|
- if (phy->index == 0)
|
|
- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
|
|
-
|
|
- /* Adjust PHY's magnitude and rate */
|
|
- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
|
|
-
|
|
- /* Disconnect threshold adjustment */
|
|
- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
|
|
- data->cfg->disc_thresh, 2);
|
|
+ if (data->cfg->type == sun8i_h3_phy) {
|
|
+ if (phy->index == 0) {
|
|
+ val = readl(data->base + REG_PHY_UNK_H3);
|
|
+ writel(val & ~1, data->base + REG_PHY_UNK_H3);
|
|
+ }
|
|
+
|
|
+ val = readl(phy->pmu + REG_PMU_UNK_H3);
|
|
+ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
|
|
+ } else {
|
|
+ /* Enable USB 45 Ohm resistor calibration */
|
|
+ if (phy->index == 0)
|
|
+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
|
|
+
|
|
+ /* Adjust PHY's magnitude and rate */
|
|
+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
|
|
+
|
|
+ /* Disconnect threshold adjustment */
|
|
+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
|
|
+ data->cfg->disc_thresh, 2);
|
|
+ }
|
|
|
|
sun4i_usb_phy_passby(phy, 1);
|
|
|
|
@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg su
|
|
.dedicated_clocks = true,
|
|
};
|
|
|
|
+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
|
|
+ .num_phys = 4,
|
|
+ .type = sun8i_h3_phy,
|
|
+ .disc_thresh = 3,
|
|
+ .dedicated_clocks = true,
|
|
+};
|
|
+
|
|
static const struct of_device_id sun4i_usb_phy_of_match[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
|
|
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
|
|
@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_u
|
|
{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
|
|
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
|
|
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
|
|
+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
|
|
|