You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/omap/patches-3.12/904-wlcore-add-initial-devi...

122 lines
3.3 KiB

If platform data is not available, try to get the required information
from the device tree. Register an OF match table and parse the
appropriate device tree nodes.
Parse interrupt property only, for now.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
drivers/net/wireless/ti/wlcore/sdio.c | 69 ++++++++++++++++++++++++++++++++---
1 file changed, 63 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -30,7 +30,7 @@
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
+#include <linux/of_irq.h>
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
#include <linux/printk.h>
@@ -214,6 +214,43 @@ static struct wl1271_if_operations sdio_
.set_block_size = wl1271_sdio_set_block_size,
};
+static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
+{
+ struct wl12xx_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ np = of_find_matching_node(NULL, dev->driver->of_match_table);
+ if (!np) {
+ dev_notice(dev, "device tree node not available\n");
+ pdata = ERR_PTR(-ENODEV);
+ goto out;
+ }
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "can't allocate platform data\n");
+ pdata = ERR_PTR(-ENODEV);
+ goto out;
+ }
+
+ pdata->irq = irq_of_parse_and_map(np, 0);
+ if (pdata->irq < 0) {
+ dev_err(dev, "can't get interrupt gpio from the device tree\n");
+ goto out_free;
+ }
+
+ goto out;
+
+out_free:
+ kfree(pdata);
+ pdata = ERR_PTR(-ENODEV);
+
+out:
+ return pdata;
+}
+
static int wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
@@ -248,11 +285,22 @@ static int wl1271_probe(struct sdio_func
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ /* The pdata allocated here is freed when the device is freed,
+ * so we don't need an additional out label to free it in case
+ * of error further on.
+ */
+
+ /* Try to get legacy platform data from the board file */
pdev_data->pdata = wl12xx_get_platform_data();
if (IS_ERR(pdev_data->pdata)) {
- ret = PTR_ERR(pdev_data->pdata);
- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
- goto out_free_glue;
+ dev_info(&func->dev,
+ "legacy platform data not found, trying device tree\n");
+
+ pdev_data->pdata = wlcore_get_pdata_from_of(&func->dev);
+ if (IS_ERR(pdev_data->pdata)) {
+ dev_err(&func->dev, "can't get platform data\n");
+ goto out_free_glue;
+ }
}
/* if sdio can keep power while host is suspended, enable wow */
@@ -386,16 +434,25 @@ static const struct dev_pm_ops wl1271_sd
};
#endif
+static const struct of_device_id wlcore_sdio_of_match_table[] = {
+ { .compatible = "ti,wilink6" },
+ { .compatible = "ti,wilink7" },
+ { .compatible = "ti,wilink8" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wlcore_sdio_of_match_table);
+
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = wl1271_remove,
-#ifdef CONFIG_PM
.drv = {
+#ifdef CONFIG_PM
.pm = &wl1271_sdio_pm_ops,
- },
#endif
+ .of_match_table = of_match_ptr(wlcore_sdio_of_match_table),
+ },
};
static int __init wl1271_init(void)