You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
freifunkist-firmware/target/linux/generic/patches-4.4/071-v4.9-0001-net-bgmac-sup...

161 lines
6.4 KiB

From 1cb94db3d1bfe0075bde78fb2989f17e0a8a3936 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 17 Aug 2016 23:00:30 +0200
Subject: [PATCH] net: bgmac: support Ethernet core on BCM53573 SoCs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can
be found in two packages (versions): BCM53573 and BCM47189. It shares
some code with the Northstar family, but also requires some new quirks.
First of all there can be up to 2 Ethernet cores on this SoC. If that is
the case, they are connected to two different switch ports allowing some
more complex/optimized setups. It seems the second unit doesn't come
fully configured and requires some IRQ quirk.
Other than that only the first core is connected to the PHY. For the
second one we have to register fixed PHY (similarly to the Northstar),
otherwise generic PHY driver would get some invalid info.
This has been successfully tested on Tenda AC9 (BCM47189B0).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bgmac-bcma.c | 19 ++++++++++++++++++-
drivers/net/ethernet/broadcom/bgmac.c | 25 +++++++++++++++++++++++++
drivers/net/ethernet/broadcom/bgmac.h | 19 +++++++++++++++++++
include/linux/bcma/bcma.h | 3 +++
include/linux/bcma/bcma_regs.h | 1 +
5 files changed, 66 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -92,6 +92,7 @@ MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
static int bgmac_probe(struct bcma_device *core)
{
+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
struct ssb_sprom *sprom = &core->bus->sprom;
struct mii_bus *mii_bus;
struct bgmac *bgmac;
@@ -157,7 +158,8 @@ static int bgmac_probe(struct bcma_devic
dev_info(bgmac->dev, "Found PHY addr: %d%s\n", bgmac->phyaddr,
bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
- if (!bgmac_is_bcm4707_family(core)) {
+ if (!bgmac_is_bcm4707_family(core) &&
+ !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr);
if (IS_ERR(mii_bus)) {
err = PTR_ERR(mii_bus);
@@ -230,6 +232,21 @@ static int bgmac_probe(struct bcma_devic
bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
break;
+ case BCMA_CHIP_ID_BCM53573:
+ bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+ bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
+ bgmac->feature_flags |= BGMAC_FEAT_IOST_ATTACHED;
+ if (core->core_unit == 0) {
+ bgmac->feature_flags |= BGMAC_FEAT_CC4_IF_SW_TYPE;
+ if (ci->pkg == BCMA_PKG_ID_BCM47189)
+ bgmac->feature_flags |=
+ BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII;
+ } else if (core->core_unit == 1) {
+ bgmac->feature_flags |= BGMAC_FEAT_IRQ_ID_OOB_6;
+ bgmac->feature_flags |= BGMAC_FEAT_CC7_IF_TYPE_RGMII;
+ }
+ break;
default:
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_SET_RXQ_CLK;
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -943,6 +943,27 @@ static void bgmac_chip_reset(struct bgma
bgmac_cco_ctl_maskset(bgmac, 1, ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
sw_type);
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE) {
+ u32 sw_type = BGMAC_CHIPCTL_4_IF_TYPE_MII |
+ BGMAC_CHIPCTL_4_SW_TYPE_EPHY;
+ u8 et_swtype = 0;
+ char buf[4];
+
+ if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
+ if (kstrtou8(buf, 0, &et_swtype))
+ dev_err(bgmac->dev, "Failed to parse et_swtype (%s)\n",
+ buf);
+ sw_type = (et_swtype & 0x0f) << 12;
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII) {
+ sw_type = BGMAC_CHIPCTL_4_IF_TYPE_RGMII |
+ BGMAC_CHIPCTL_4_SW_TYPE_RGMII;
+ }
+ bgmac_cco_ctl_maskset(bgmac, 4, ~(BGMAC_CHIPCTL_4_IF_TYPE_MASK |
+ BGMAC_CHIPCTL_4_SW_TYPE_MASK),
+ sw_type);
+ } else if (bgmac->feature_flags & BGMAC_FEAT_CC7_IF_TYPE_RGMII) {
+ bgmac_cco_ctl_maskset(bgmac, 7, ~BGMAC_CHIPCTL_7_IF_TYPE_MASK,
+ BGMAC_CHIPCTL_7_IF_TYPE_RGMII);
}
if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
@@ -1486,6 +1507,10 @@ int bgmac_enet_probe(struct bgmac *info)
*/
bgmac_clk_enable(bgmac, 0);
+ /* This seems to be fixing IRQ by assigning OOB #6 to the core */
+ if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
+ bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
+
bgmac_chip_reset(bgmac);
err = bgmac_dma_alloc(bgmac);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -369,6 +369,21 @@
#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0
#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
+#define BGMAC_CHIPCTL_4_IF_TYPE_MASK 0x00003000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RMII 0x00000000
+#define BGMAC_CHIPCTL_4_IF_TYPE_MII 0x00001000
+#define BGMAC_CHIPCTL_4_IF_TYPE_RGMII 0x00002000
+#define BGMAC_CHIPCTL_4_SW_TYPE_MASK 0x0000C000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHY 0x00000000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYMII 0x00004000
+#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYRMII 0x00008000
+#define BGMAC_CHIPCTL_4_SW_TYPE_RGMII 0x0000C000
+
+#define BGMAC_CHIPCTL_7_IF_TYPE_MASK 0x000000C0
+#define BGMAC_CHIPCTL_7_IF_TYPE_RMII 0x00000000
+#define BGMAC_CHIPCTL_7_IF_TYPE_MII 0x00000040
+#define BGMAC_CHIPCTL_7_IF_TYPE_RGMII 0x00000080
+
#define BGMAC_WEIGHT 64
#define ETHER_MAX_LEN 1518
@@ -390,6 +405,10 @@
#define BGMAC_FEAT_NO_CLR_MIB BIT(13)
#define BGMAC_FEAT_FORCE_SPEED_2500 BIT(14)
#define BGMAC_FEAT_CMDCFG_SR_REV4 BIT(15)
+#define BGMAC_FEAT_IRQ_ID_OOB_6 BIT(16)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17)
+#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
+#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
struct bgmac_slot_info {
union {
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -23,6 +23,7 @@
#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
/* Agent registers (common for every core) */
+#define BCMA_OOB_SEL_OUT_A30 0x0100
#define BCMA_IOCTL 0x0408 /* IO control */
#define BCMA_IOCTL_CLK 0x0001
#define BCMA_IOCTL_FGC 0x0002