You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Lars-Peter Clausen 83246559fd uboot-kirkwood: Add support for iomega iconnect wireless 14 years ago
docs docs: fix a counting fail 15 years ago
include update 2.6.35.x to 2.6.35.7 14 years ago
package uboot-kirkwood: Add support for iomega iconnect wireless 14 years ago
scripts feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies 14 years ago
target Iomega iConnect Wireless platform support 14 years ago
toolchain optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine. 14 years ago
tools mtd-utils: refresh patches again 14 years ago
.gitignore .gitignore: Undo accidental commit. 15 years ago
BSDmakefile
Config.in optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine. 14 years ago
LICENSE
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 14 years ago
README
feeds.conf.default Add lxde feed to feeds.conf.default 14 years ago
rules.mk drop the usr/ prefix when scanning for libgcc.a 14 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org