You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Jiawei Wang 9c500db896 ramips: fix used MAC addresses for Phicomm K2P ... The factory partition of the Phicomm K2P contains two MAC addresses. The lower MAC address is at offset 0xe006 and the higher one is at offset 0xe000. Use the lower MAC address as base mac-address which the switch driver increments by one for the second (wan) vlan. The MAC addresses are still inverted in contrast to the stock firmware where the lower MAC address is used for wan. But at least the use of a MAC address not intended/reserved for this particular board is fixed. Signed-off-by: Jiawei Wang <me@jwang.link>		7 years ago
..
base-files	ramips: add support for TP-Link Archer C20 v1	7 years ago
dts	ramips: fix used MAC addresses for Phicomm K2P	7 years ago
files-4.9/drivers/net/ethernet/mtk	ramips: Change ethernet driver to use napi_complete_done.	7 years ago
image	ramips: add support for TP-Link Archer C20 v1	7 years ago
mt76x8	ramips: merge mt7628/mt7688 into mt76x8	7 years ago
mt7620	…
mt7621	…
patches-4.9	…
rt288x	…
rt305x	…
rt3883	…
Makefile	ramips: merge mt7628/mt7688 into mt76x8	7 years ago
modules.mk	ramips: fix mt76x8 dependencies	7 years ago