You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
570 lines
10 KiB
570 lines
10 KiB
/*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
|
|
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of any
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "qcom-ipq8064-v1.0.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
compatible = "compex,wpq864", "qcom,ipq8064";
|
|
model = "Compex WPQ864";
|
|
|
|
aliases {
|
|
mdio-gpio0 = &mdio0;
|
|
serial0 = &gsbi4_serial;
|
|
ethernet0 = &gmac1;
|
|
ethernet1 = &gmac0;
|
|
|
|
led-boot = &led_pass;
|
|
led-failsafe = &led_fail;
|
|
led-running = &led_pass;
|
|
led-upgrade = &led_pass;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
soc {
|
|
rpm@108000 {
|
|
pinctrl-0 = <&rpm_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
nand@1ac00000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
mt29f2g08abbeah4@0 {
|
|
compatible = "qcom,nandcs";
|
|
|
|
reg = <0>;
|
|
|
|
nand-ecc-strength = <4>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
SBL1@0 {
|
|
label = "SBL1";
|
|
reg = <0x0000000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
MIBIB@40000 {
|
|
label = "MIBIB";
|
|
reg = <0x0040000 0x0140000>;
|
|
read-only;
|
|
};
|
|
|
|
SBL2@180000 {
|
|
label = "SBL2";
|
|
reg = <0x0180000 0x0140000>;
|
|
read-only;
|
|
};
|
|
|
|
SBL3@2c0000 {
|
|
label = "SBL3";
|
|
reg = <0x02c0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
DDRCONFIG@540000 {
|
|
label = "DDRCONFIG";
|
|
reg = <0x0540000 0x0120000>;
|
|
read-only;
|
|
};
|
|
|
|
SSD@660000 {
|
|
label = "SSD";
|
|
reg = <0x0660000 0x0120000>;
|
|
read-only;
|
|
};
|
|
|
|
TZ@780000 {
|
|
label = "TZ";
|
|
reg = <0x0780000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
RPM@a00000 {
|
|
label = "RPM";
|
|
reg = <0x0a00000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
APPSBL@c80000 {
|
|
label = "APPSBL";
|
|
reg = <0x0c80000 0x0500000>;
|
|
read-only;
|
|
};
|
|
|
|
APPSBLENV@1180000 {
|
|
label = "APPSBLENV";
|
|
reg = <0x1180000 0x0080000>;
|
|
};
|
|
|
|
ART@1200000 {
|
|
label = "ART";
|
|
reg = <0x1200000 0x0140000>;
|
|
};
|
|
|
|
ubi@1340000 {
|
|
label = "ubi";
|
|
reg = <0x1340000 0x4000000>;
|
|
};
|
|
|
|
BOOTCONFIG@1340000 {
|
|
label = "BOOTCONFIG";
|
|
reg = <0x5340000 0x0060000>;
|
|
};
|
|
|
|
SBL2-1@53a0000- {
|
|
label = "SBL2_1";
|
|
reg = <0x53a0000 0x0140000>;
|
|
read-only;
|
|
};
|
|
|
|
SBL3-1@54e0000 {
|
|
label = "SBL3_1";
|
|
reg = <0x54e0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
DDRCONFIG-1@5760000 {
|
|
label = "DDRCONFIG_1";
|
|
reg = <0x5760000 0x0120000>;
|
|
read-only;
|
|
};
|
|
|
|
SSD-1@5880000 {
|
|
label = "SSD_1";
|
|
reg = <0x5880000 0x0120000>;
|
|
read-only;
|
|
};
|
|
|
|
TZ-1@59a0000 {
|
|
label = "TZ_1";
|
|
reg = <0x59a0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
RPM-1@5c20000 {
|
|
label = "RPM_1";
|
|
reg = <0x5c20000 0x0280000>;
|
|
read-only;
|
|
};
|
|
|
|
BOOTCONFIG1@5ea0000 {
|
|
label = "BOOTCONFIG1";
|
|
reg = <0x5ea0000 0x0060000>;
|
|
};
|
|
|
|
APPSBL-1@5f00000 {
|
|
label = "APPSBL_1";
|
|
reg = <0x5f00000 0x0500000>;
|
|
read-only;
|
|
};
|
|
|
|
ubi-1@6400000 {
|
|
label = "ubi_1";
|
|
reg = <0x6400000 0x4000000>;
|
|
};
|
|
|
|
unused@a400000 {
|
|
label = "unused";
|
|
reg = <0xa400000 0x5c00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio0: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "virtual,mdio-gpio";
|
|
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
ethernet-phy@0 {
|
|
device_type = "ethernet-phy";
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
|
0x00094 0x4e /* PORT6_STATUS */
|
|
>;
|
|
};
|
|
|
|
ethernet-phy@4 {
|
|
device_type = "ethernet-phy";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
rss4 {
|
|
label = "wpq864:green:rss4";
|
|
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
rss3 {
|
|
label = "wpq864:green:rss3";
|
|
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
|
|
rss2 {
|
|
label = "wpq864:orange:rss2";
|
|
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
rss1 {
|
|
label = "wpq864:red:rss1";
|
|
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_pass: pass {
|
|
label = "wpq864:green:pass";
|
|
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_fail: fail {
|
|
label = "wpq864:green:fail";
|
|
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb {
|
|
label = "wpq864:green:usb";
|
|
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb-pcie {
|
|
label = "wpq864:green:usb-pcie";
|
|
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
beeper {
|
|
compatible = "gpio-beeper";
|
|
|
|
pinctrl-0 = <&beeper_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy-mode = "rgmii";
|
|
qcom,id = <1>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac2 {
|
|
status = "okay";
|
|
|
|
phy-mode = "sgmii";
|
|
qcom,id = <2>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gsbi4 {
|
|
status = "okay";
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
};
|
|
|
|
&gsbi4_serial {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&uart0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&gsbi5 {
|
|
status = "okay";
|
|
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
|
|
|
spi@1a280000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&spi_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
s25fl256s1@0 {
|
|
compatible = "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hs_phy_0 { /* USB3 port 0 HS phy */
|
|
status = "okay";
|
|
};
|
|
|
|
&hs_phy_1 { /* USB3 port 1 HS phy */
|
|
status = "okay";
|
|
};
|
|
|
|
&ss_phy_0 { /* USB3 port 0 SS phy */
|
|
status = "okay";
|
|
|
|
rx_eq = <2>;
|
|
tx_deamp_3_5db = <32>;
|
|
mpll = <160>;
|
|
};
|
|
|
|
&ss_phy_1 { /* USB3 port 1 SS phy */
|
|
status = "okay";
|
|
|
|
rx_eq = <2>;
|
|
tx_deamp_3_5db = <32>;
|
|
mpll = <160>;
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
/delete-property/ pinctrl-0;
|
|
/delete-property/ pinctrl-names;
|
|
/delete-property/ perst-gpios;
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2 {
|
|
status = "okay";
|
|
|
|
/delete-property/ pinctrl-0;
|
|
/delete-property/ pinctrl-names;
|
|
/delete-property/ perst-gpios;
|
|
};
|
|
|
|
&qcom_pinmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pinctrl0 {
|
|
pcie0_pcie2_perst {
|
|
pins = "gpio3";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
led_pins: led_pins {
|
|
mux {
|
|
pins = "gpio7", "gpio8", "gpio9", "gpio22",
|
|
"gpio23", "gpio24", "gpio25", "gpio53";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
button_pins: button_pins {
|
|
mux {
|
|
pins = "gpio54";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
beeper_pins: beeper_pins {
|
|
mux {
|
|
pins = "gpio55";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
rpm_pins: rpm_pins {
|
|
mux {
|
|
pins = "gpio12", "gpio13";
|
|
function = "gsbi4";
|
|
drive-strength = <10>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0_pins {
|
|
mux {
|
|
pins = "gpio10", "gpio11";
|
|
function = "gsbi4";
|
|
drive-strength = <10>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19";
|
|
function = "gsbi5";
|
|
drive-strength = <10>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio21";
|
|
function = "gsbi5";
|
|
drive-strength = <12>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio20";
|
|
function = "gpio";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
nand_pins: nand_pins {
|
|
mux {
|
|
pins = "gpio34", "gpio35", "gpio36", "gpio37",
|
|
"gpio38", "gpio39", "gpio40", "gpio41",
|
|
"gpio42", "gpio43", "gpio44", "gpio45",
|
|
"gpio46", "gpio47";
|
|
function = "nand";
|
|
drive-strength = <10>;
|
|
bias-disable;
|
|
};
|
|
|
|
pullups {
|
|
pins = "gpio39";
|
|
bias-pull-up;
|
|
};
|
|
|
|
hold {
|
|
pins = "gpio40", "gpio41", "gpio42", "gpio43",
|
|
"gpio44", "gpio45", "gpio46", "gpio47";
|
|
bias-bus-hold;
|
|
};
|
|
};
|
|
|
|
mdio0_pins: mdio0_pins {
|
|
mux {
|
|
pins = "gpio0", "gpio1";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
rgmii2_pins: rgmii2_pins {
|
|
mux {
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30",
|
|
"gpio31", "gpio32", "gpio51", "gpio52",
|
|
"gpio59", "gpio60", "gpio61", "gpio62";
|
|
function = "rgmii2";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tcsr {
|
|
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
|
};
|
|
|