You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Django Armstrong 1c2f7b5115 ath79: add support for Devolo WiFi Pro 1750e ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3) WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3) BTN: 1x Reset 1x WPS 1x USB eject LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports) Dupont 4 pin header Rear RJ45 serial port non-functional USB: 1x v2.0 Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password previously set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: Django Armstrong <iamdjango@hotmail.com>		6 years ago
..
lzma-loader	ath79: lzma-loader: sync with ar71xx target	6 years ago
Makefile	ath79: add support for Buffalo BHR-4GRV2	6 years ago
common-buffalo.mk	ath79: add hwver parameter to buffalo-tag	6 years ago
common-netgear.mk	ath79: mark netgear variables as device specific	6 years ago
common-tp-link.mk	ath79: remove duplicate image build variables	6 years ago
generic-tp-link.mk	ath79: add support for TP-Link Archer C6 v2	6 years ago
generic-ubnt.mk	ar71xx/ath79: switch devices to the -ct driver and firmware	6 years ago
generic.mk	ath79: add support for Devolo WiFi Pro 1750e	6 years ago
nand.mk	ath79: fix boardname of GL.iNet GL-AR300M	6 years ago
tiny-netgear.mk	ath79: remove duplicate image build variables	6 years ago
tiny-tp-link.mk	ath79: add support for TP-Link TL-WR841N/ND v8	6 years ago
tiny.mk	ath79: modify mtd partitions for Buffalo BHR-4GRV2	6 years ago