You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Eddi De Pieri 07bc0d6089 lantiq: fix pci issue if mem kernel parameter is used ... As specified by e0229a16b0 if the VR9 based router provides FXS ports and they should enabled then the following must added to the kernel command line: mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M By adding mem= parameter a pci device stop working correctly. The pci-lantiq.c module use get_num_physpages() to compute dynamically the memory amount of the board. The mem= make the module to compute in the wrong way the BAR11MASK, so in this situation the mask is misaligned with the dma area that the hardware expects. This patch is a port of what legacy ifxmips_pci.c does. Signed-off-by: Eddi De Pieri <eddi@depieri.net>		8 years ago
..
base-files	lantiq: use the device tree bindings from rt2x00 driver	8 years ago
dts	lantiq: use the device tree bindings from rt2x00 driver	8 years ago
files/firmware/lantiq	…
image	…
patches-4.4	lantiq: fix pci issue if mem kernel parameter is used	8 years ago
xrx200	…
xway	…
xway_legacy	…
Makefile	…
config-4.4	…
modules.mk	…