You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Gabor Juhos 6cf3706f85 build jffs2 images by default 16 years ago
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 16 years ago
include get rid of linux 2.6.29 16 years ago
package download and install rt2870 firmware (#5519) 16 years ago
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 16 years ago
target build jffs2 images by default 16 years ago
toolchain This patch adds a target for the IBM PowerXCell Accelerator Board. (aka mvXCell-8i from MatrixVision or GigaAccel 180 from Fixstars) 16 years ago
tools firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 16 years ago
.gitignore add logs/ to .gitignore 16 years ago
BSDmakefile
Config.in add a config option to select the binary stripping method to use (between none, strip & sstrip) 16 years ago
LICENSE
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 16 years ago
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 16 years ago
feeds.conf.default switch to LuCI 0.9.x branch 16 years ago
rules.mk add a config option to select the binary stripping method to use (between none, strip & sstrip) 16 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org